KitLog pro

Powered By Kitlog Pro v2.0

Daves Sonex Web Site
Work Logs Found: 112
Category Work Time: 283 Hours
 Date
Hours
Work Log Summary

Details

 07-29-2019
1.00
Modify the forward rib.
Details
     

 03-07-2019
1.25
Replaced a broken landing light lens.
Details
       

 03-07-2019
1.50
Opened up the leading edge inboard rib.
Details
       

 02-28-2019
1.75
Paint wing tips.
Details
       

 02-07-2019
2.00
Sanded and Primed wingtips.
Details
       

 05-08-2017
2.25
Removed wings.
Details
     

 05-05-2017
4.00
Finished wing rigging
Details
       

 04-21-2017
2.50
Back drill aft fuselage attach angles.
Details
     

 04-20-2017
4.50
Final up drill of wing attach blocks and angles.
Details
       

 04-18-2017
3.75
Up drill spar blocks and angles.
Details
       

 04-17-2017
5.00
Start rigging wing process.
Details
       

 04-11-2017
3.50
Home from winter vacation.
Details

 10-04-2016
4.00
Finish drilling the attach Blocks.
Details
     

 09-29-2016
6.00
Remove wings and drill out the forward fuselage an
Details
     

 09-26-2016
1.00
Rigg, drill wing attach blocks, root and end attac
Details

 08-29-2016
2.00
Preparation to rigg wings.
Details
       

 08-16-2016
1.50
Prepared wings for rigging.
Details

 12-10-2015
3.50
Rigging wings
Details
       

 10-28-2015
1.00
Pin wings in fuselage.
Details
       

 01-01-2012
1.00
Rivet Flap hinge to rear spar.
Details
       

 12-30-2011
1.25
Trimmed the left fiberglass wing tip.
Details
       

 12-27-2011
1.33
Flip wing and rivet top LE skin.
Details
     

 12-20-2011
1.67
Dimpled and final debur of the leading edge skin.
Details
       

 12-19-2011
3.00
Flipped wing again. Dimpled lower forward ribs. Fa
Details
       

 12-18-2011
2.50
Cleco and rivet Botom Skin
Details
       

 12-15-2011
2.25
Cleco and rivet top skin and aileron hinge half.
Details
       

 12-14-2011
2.00
Installed aileron pushrod assembly to bellcrank.
Details
       

 12-13-2011
2.25
Installed the reinforcement ring onto the bottom s
Details
       

 12-10-2011
2.00
Deburr ribs and aft spar.
Details
       

 12-05-2011
1.25
Deburr the main top left wing skin.
Details
       

 12-01-2011
1.50
Deburr leading edge.
Details
       

 11-19-2011
2.50
Pilot drill top left wing skin to aft ribs.
Details
       

 11-17-2011
1.50
Flipped left wing, drill top skin.
Details
       

 11-14-2011
4.25
Position forward skin and drill forward ribs.
Details
       

 11-13-2011
3.00
Flip wing, fit bottom skin and forward skin.
Details
       

 11-10-2011
4.50
Pilot drilled top skin,
Details
       

 11-01-2011
4.00
Top Skin, Ribs pilot drilled.
Details
       

 10-23-2011
0.75
Cut materiel from nose of forward rib..
Details
       

 10-21-2011
0.01
Build Wing stand.
Details
       

 09-19-2011
5.25
Cleco and rivet top skin. Cut wing tip. Wire landi
Details
       

 09-12-2011
3.25
Final inspection and deburr of bottom leading edge
Details
       

 09-11-2011
2.00
Cut and shape landing light lens.
Details
       

 09-09-2011
2.00
Cut and install top lens mounting bracket.
Details
     

 09-07-2011
2.00
Final deburr and inspection of top leading edge.
Details
     

 09-06-2011
3.00
Cut pieces for the landing light lens bracket.
Details
       

 08-23-2011
2.50
Dimpled forward ribs and leading edge.
Details
     

 08-22-2011
4.00
Cut Landing light hole. Cut pitot hole and bracket
Details
       

 08-08-2011
1.50
Complete Aileron Push/Pull rod and install.
Details
       

 08-04-2011
2.50
Debur bottom skin, fit, cleco, rivet.
Details

 06-29-2011
2.17
Deburr, fit and cleco bottom Skin for riveting.
Details
       

 06-23-2011
1.50
Drilled, Deburred, Dimpled, and Riveted nut plates
Details
       

 06-23-2011
1.42
Continue deburr of Main Spar and Skin.
Details

 06-21-2011
1.50
Updrill and Deburr Bottom Main Spar and Skin.
Details

 06-20-2011
2.50
Deburred Top Skin, Root Doubler, Aft ribs and top
Details
       

 06-20-2011
1.75
Bottom Rear Spar, Bottom Skin, and Flap Hinge updr
Details
     

 06-19-2011
1.50
Deburred Leading Edge and Forward Ribs
Details
     

 06-09-2011
2.25
Inspection plate ring. Deburr top LE edge ribs.
Details
       

 05-25-2011
1.75
Updrill Top Right Wing Skin and cleco Hinges.
Details
       

 05-21-2011
0.50
Flipped wing.
Details
     

 05-17-2011
1.00
Cleco Bottom Forward Skin.
Details
       

 05-16-2011
3.00
Clecoed Forward Skin to Top Main Spar of right win
Details
       

 04-16-2011
1.00
Build new Forward Rib.
Details
       

 04-15-2011
1.00
A bad accident with the right wing.
Details
     

 04-14-2011
0.75
Placed Ratchet Straps to pull Leading Edge into po
Details
       

 04-07-2011
1.25
Fit and pilot drill Right Wing Leading Edge .
Details
       

 04-05-2011
1.25
Remove Fwd Root Rib. Bend Attach Angle.
Details
       

 04-04-2011
0.50
Removed right Forward Root Rib.
Details
     

 04-01-2011
1.17
Fit Leading Edge Skin and clecoed to Main Spar.
Details
       

 03-30-2011
1.17
Pilot drilled bottom skin to the main spar extrusi
Details
       

 03-29-2011
3.00
Fit and drill bottom skin on right wing.
Details
       

 03-24-2011
3.33
Pilot drilled and clecoed top wing skin, ribs.
Details
       

 03-23-2011
1.67
Level wings to eliminate twist.
Details
       

 01-19-2011
3.00
Ream holes in forward ribs for tubing.
Details
       

 01-08-2011
1.17
Installed nylon tubes for recognition / nivigation
Details
       

 01-02-2011
4.00
Clecoed and riveted left wing ribs.
Details
       

 12-13-2010
0.01
Cut Flap Skins
Details
       

 12-09-2010
1.25
Start the riveting of the ribs to the main spar.
Details
     

 12-09-2010
3.25
Install the Aft and Forward Root Ribs.
Details
       

 12-07-2010
8.00
Cleco #30 Left Wing Ribs, Spacers, Rear Spar.
Details
       

 12-06-2010
2.50
Start the Left Wing. Pilot holes in spacers,Spar.
Details

 12-06-2010
2.50
Attach Forward Root Rib.
Details
     

 12-05-2010
5.50
Attach Right Aft Root Rib.
Details
       

 12-03-2010
3.50
Riveted spacers and Ribs to Main Spar.
Details

 12-01-2010
5.25
Deburred all Right Wing parts.
Details

 11-30-2010
3.25
Updrill Spacers, main spar.
Details

 11-28-2010
5.50
Wing Ribs
Details
       

 11-21-2010
3.50
Aileron Bellcrank and box.
Details
       

 11-20-2010
5.00
Aileron Bellcrank Assemblies
Details
       

 11-19-2010
2.50
Took my Wing Spars to Ben Grabers shop.
Details
       

 11-19-2010
2.00
Deburred and cleaned both spars.
Details
     

 11-18-2010
1.25
Rebuild Angle for the Root Wing Attach Assembly.
Details
     

 11-15-2010
3.75
Attach Assemblies to the Left Main Wing Spar>
Details
       

 11-12-2010
5.75
Attach Assemblies to the Right Main Wing Spar.
Details
       

 11-05-2010
3.00
Completed Wing Attachment Assemblies.
Details
       

 11-04-2010
2.25
Build new attach Angle.
Details
       

 10-27-2010
3.25
Wing Attach Assemblies.
Details
       

 10-26-2010
4.00
Construct Attachment Assemblies
Details
       

 10-25-2010
4.50
Debur Gussets and Aft Ribs
Details
       

 10-24-2010
5.25
Continue work on Aft Rib assemblies 1-5
Details
       

 10-21-2010
3.00
Cut W16-06 Aft Ribs and bend 07-08 Gussets.
Details
       

 10-20-2010
1.25
Trim 8 Forward Ribs.
Details
       

 10-20-2010
2.75
Drill and rivet 16 gussets.
Details
       

 10-19-2010
3.00
Bent Flanges on gussets. Made template for the 05
Details
       

 10-17-2010
2.00
Final Rivet of right and left rear spar.
Details
       

 10-16-2010
0.75
Primed parts for right rear wing spar.
Details
       

 10-12-2010
1.50
Updrill Left Rear Wing Spar
Details
       

 09-25-2010
3.50
Up-drill Right Rear Spar.
Details
       

 09-23-2010
4.00
Finish Rear Spar parts and cleco all..
Details
       

 09-22-2010
0.75
Continued work on rear spars.
Details

 09-21-2010
3.00
Pilot drill Rear Spars. Build rear spar ends.
Details
       

 09-19-2010
2.50
Cut rear spar channel and fabricate spar parts.
Details
       

 07-14-2010
1.00
Flap hinges and flap drive rib assembly.
Details
       










Copyright © 2001-2019 Matronics. All Rights Reserved.