KitLog pro

Powered By Kitlog Pro v2.0

Russ Karnap
Work Logs Found: 150
Category Work Time: 776 Hours
 Date
Hours
Work Log Summary

Details

 07-08-2020
3.00
Final Sized All FW Holes
Details

 07-07-2020
3.00
Match Drilled FW
Details
       

 02-11-2020
4.00
Made F-601J Angles
Details
       

 02-10-2020
4.00
Sorted Fuselage Parts
Details
     

 02-09-2020
8.50
Right Wing-Begin Assembly
Details
       

 02-07-2020
4.50
Primed Right Wing Parts
Details
       

 02-06-2020
5.00
Dimpled R. Wing Skings, Gap Filler
Details
       

 02-05-2020
1.50
R. Wing - Dimple LE Ribs and Skin
Details
       

 02-02-2020
4.00
Dimpling Right Wing Parts
Details
       

 01-05-2020
1.50
Sealed RFT Manufactured Heads
Details
       

 01-02-2020
5.50
Installed R. Fuel Tank Bafle
Details
       

 01-01-2020
5.50
Happy New Year - Installed Baffle
Details
       

 12-31-2019
4.00
Continued R. Fuel Tank - Rib 7, Fuel Sender & PU
Details
       

 12-29-2019
2.50
Rib 7 and Vent - Right Fuel Tank
Details
       

 12-28-2019
4.00
Riveted Rib 1 Reinforcement, Installed Vent
Details
       

 12-27-2019
4.00
Riveted Ribs 1, 5, and 6
Details
       

 12-26-2019
4.00
Sealed Ribs 1,5,6 & Corrected Mistake
Details
       

 12-13-2019
2.50
Right Fuel Tank - Begin Sealing
Details
       

 12-10-2019
4.00
Sealed Ribs 2-4, Installed Drain & Fill
Details
       

 12-08-2019
4.00
Riveted R. Fuel Tank Stiffeners
Details
       

 12-07-2019
5.00
Continued Right Fuel Tank
Details
       

 12-06-2019
3.00
Continued Right Fuel Tank
Details
       

 12-04-2019
2.00
Continued Right Fuel Tank
Details
       

 12-02-2019
2.00
R. Fuel Tank - Continue
Details
       

 12-01-2019
2.00
Review and Pickup on R. Fuel Tank
Details
     

 07-27-2019
10.00
Right Wing - Z-Brackets
Details
       

 07-26-2019
4.00
Drilled Backing Plate, Z-Brackets for Right Wing
Details
       

 07-25-2019
2.00
Backing Strip
Details
       

 07-24-2019
4.00
Right Wing - Match Drilled all Skins, Assembled LE
Details
       

 07-23-2019
2.50
Match Drilled Right Top Wing Skins, Clecoed Right
Details
       

 07-22-2019
4.00
Right Wing - Doubler and Cleco
Details
       

 07-21-2019
8.50
Riveted Right Wing Skeleton
Details
       

 07-20-2019
6.00
Prepped and Primed
Details

 07-19-2019
2.00
Prepped Right Main Wing Ribs, Plates, and brackets
Details
       

 07-18-2019
1.00
Moved Left Wing to Stand
Details
       

 07-17-2019
3.00
Made Wing Stand
Details
       

 07-16-2019
1.00
WEB SURFING!!
Details

 07-15-2019
2.00
Frustration
Details
       

 07-14-2019
5.75
Left Aileron - Misc
Details
       

 07-13-2019
3.50
Moved Wing to Bench, Assembled Aileron Brackets
Details
       

 07-12-2019
7.00
Right Aileron - Finish
Details
       

 07-11-2019
6.00
Finished Left Flap, Started Riveting Right Flap
Details
       

 07-07-2019
10.00
Began Riveting Left Flap
Details
       

 07-06-2019
10.00
Both Flaps - Deburr and Prime
Details
       

 07-05-2019
8.00
Right
Details
       

 06-30-2019
10.00
Flaps - Deburred edges, Match Drill Left Flap
Details
       

 06-29-2019
7.00
Completed BOTH Ailerons
Details
       

 06-25-2019
2.75
Left Aileron - Riveted top of skins, Nose Ribs, an
Details
       

 06-24-2019
5.25
Ailerons - Rivet Stiffeners and Plates and Bent Tr
Details
       

 06-23-2019
9.00
Prepped, Primed, and Dimpled all Aileron Parts
Details
       

 06-22-2019
5.50
Continued Right Aileron Prep
Details
       

 06-21-2019
2.50
Deburred Holes and Edges Ailerons
Details

 06-17-2019
2.50
Continued Left Aileron
Details
       

 06-16-2019
5.00
Started Ailerons
Details
       

 06-15-2019
4.50
Finished Riveting Top Skins to Left Wing
Details
       

 05-27-2019
5.00
Left Wing, Top Inboard and Outboard Skins
Details
       

 05-25-2019
4.00
Riveted Left Wing, Inside Top Skin, Top Row
Details
     

 12-25-2018
3.00
Left Wing Installed Fuel Tank
Details
       

 12-24-2018
1.00
Riveted Inboard 3 Ribs of Left Trailing Edge
Details
       

 12-24-2018
2.00
Prepare Right Wing Ribs for Priming
Details
       

 12-22-2018
3.50
Continued Right Wing Prep
Details
       

 12-21-2018
7.00
Nutplates - Left & Right Wing, Touch up Paint, CS
Details
       

 12-20-2018
5.00
Left Tank Pressure Test, Installed Left LE, Began
Details
       

 12-19-2018
6.00
Riveted Left Leading Edge
Details
       

 12-18-2018
8.50
Left Wing - Primed Stall, Skins, Rib... CS Main S
Details
       

 12-13-2018
6.00
Riveted End Z-Brackets and Baffle
Details
       

 12-12-2018
2.50
Left Fuel Tank - Install covers
Details
       

 12-11-2018
8.00
Riveted #1&7 Fuel Tank Ribs and Clecoed Baffle
Details
       

 12-10-2018
6.50
Continue Left Fuel Tank
Details
       

 12-06-2018
3.00
Proseal & Cleco Rib #7 - Left Fuel Tank
Details
       

 12-05-2018
7.00
Wet Riveted Left Fuel Tank Interior Ribs
Details
       

 12-04-2018
5.50
Pro-Sealed Left Wing Ribs - Clecoed Only
Details
       

 12-02-2018
5.50
Left Fuel Tank - Rib Fillets, Rivet Heads, Fuel Ca
Details
       

 12-01-2018
7.00
Installed L Fuel Tank Stiffeners, Fuel Cap/Drain
Details
       

 11-30-2018
9.50
Left Wing - Dimpling and AOA/Pitot Install
Details
       

 11-29-2018
7.50
Dimpled Left Fuel Tank, Planned AOA, Stall Warner
Details
       

 11-28-2018
9.50
Cut Root Ribs, Anti-HangUps, Deburr/Dimple
Details
       

 11-27-2018
5.50
Left Fuel Vent Clips, Fitting, and Fuel Trap Door
Details
       

 11-26-2018
8.50
Fuel Sender Arm (OOPS), Move Left Fuel Sender, CS
Details
       

 11-25-2018
8.00
Left Fuel Tank - Nose Reinforcement, Fuel Cap/Flan
Details
       

 11-24-2018
7.00
Made T-405, L.Fuel Tank Stiffeners, Z-Bracket Nutp
Details
       

 11-23-2018
9.00
Match Drilled Left Tank and Fabbed Stiffeners
Details
       

 11-22-2018
3.00
Left Wing - Drilled Z Brackets to Baffle
Details
       

 11-21-2018
8.00
Left Wing LE - Match Drilled Ribs to Skin and All
Details
       

 11-20-2018
2.00
Match Drilled all four Left Wing Main Skins
Details

 11-19-2018
9.00
Riveted Main Ribs to Main Spar and Rear Spar of Le
Details
       

 11-17-2018
2.00
Final Drilled all Main and Nose (not Tank) Ribs to
Details
       

 11-16-2018
9.00
Prepped Main and Tip Ribs for the Left Wing. Prim
Details
       

 11-15-2018
6.00
Match Drilled Left Main and Tip (not Fuel) Ribs to
Details
       

 11-14-2018
4.00
Continued Deburring - Added Cable Holes
Details
       

 11-12-2018
4.50
Deburr Edges in all corners of Left Nose Ribs
Details

 11-11-2018
5.00
Made Rib Tool, Straightened/Fluted all Wing Ribs
Details
       

 11-10-2018
1.75
Straighten & Flute - Left LE Ribs
Details
       

 10-30-2018
4.00
Primed and Assembled Left Wing - Rear Spar Parts
Details
       

 10-29-2018
9.00
Left Wing - Tie Down Install, Begin Rear Spar
Details
       

 10-28-2018
8.00
Nutplates and Tiedowns on the Left Wing
Details
       

 10-27-2018
3.00
Installed Electric Elevator Trim
Details
       

 10-26-2018
7.50
Finished Most things on L. Elevator
Details
       

 10-25-2018
7.00
Began work on the Left Wing
Details
       

 10-23-2018
4.00
Riveted Leading Edge of L. Elevator and started Wi
Details
       

 10-22-2018
10.00
Finished R. Elevator, Started Left
Details
       

 10-21-2018
8.00
Finished Prep and Began Assembly
Details
       

 10-19-2018
3.50
Trim Tab Fab
Details
       

 10-18-2018
8.00
Bent Left Elevator Tabs, Prepped new Spar
Details
       

 10-09-2018
1.00
Deburred and Cleaned Edges
Details

 10-04-2018
6.00
Deburr, Dimple, Edge
Details
       

 10-03-2018
2.00
Match Drill all Left Elevator Parts
Details

 10-03-2018
2.00
Countersinking Left Elevator
Details
       

 10-02-2018
5.00
Work on Elevator Trim
Details

 09-29-2018
1.00
Finished Outstanding Items
Details
       

 09-29-2018
2.00
EAA Tech Counselor Review - Bud Smith
Details
     

 04-12-2018
3.00
Completed Inventory and Inspection
Details
       

 04-11-2018
2.00
Receive and Begin Unpacking
Details
       

 02-09-2018
1.00
Finished Bending Elevators
Details

 02-08-2018
7.00
Continued Elevators
Details

 02-07-2018
8.00
Riveted all Stiffeners on both Elevator Skins
Details

 02-06-2018
8.00
Prepared and primed Elevator Skins and Stiffeners
Details

 02-05-2018
8.00
Finished Rudder, Continued Elevators
Details

 02-02-2018
5.00
Began both Elevators
Details

 02-01-2018
2.00
Rivet Rudder and Glue AEX Wedge
Details
       

 01-31-2018
11.00
Riveted Frame and Skin
Details

 01-30-2018
8.00
Prepped and Primed all Rudder parts
Details

 01-29-2018
5.50
Continue Rudder
Details

 01-28-2018
2.00
Continue working on Rudder
Details

 01-27-2018
6.50
Riveted Skins to Stiffeners, misc other
Details

 01-25-2018
8.00
Prepped and Primed Skins and Stiffeners
Details

 01-24-2018
7.00
Made Stiffeners and match drilled Skin
Details

 01-23-2018
7.00
Completed VS
Details

 01-22-2018
2.50
Dimpled and CS all parts
Details

 01-20-2018
4.00
Completed Horizontal Stabilizer!!!!
Details

 01-19-2018
7.00
Continue Riveting HS
Details

 01-18-2018
5.00
Finished Riveting Left HS Skin to Front Spar
Details

 01-17-2018
10.00
Begin Prep/Rivet Left HS
Details

 01-16-2018
4.00
Primed HS and VS
Details

 01-15-2018
8.00
Prepped and Primed VS
Details

 01-14-2018
4.00
Finished VS Match Drilling
Details

 01-13-2018
4.00
Drilled HS0005 Flanges, prepped for Paint
Details

 01-12-2018
2.00
Prepare New Parts
Details

 01-09-2018
6.00
Replace HS714, HS710 and HS00005 R&L
Details

 01-04-2018
1.00
Trip to Glue Products Plus
Details

 01-02-2018
7.00
Tried to prime, but had to strip everything!
Details

 01-01-2018
7.00
Prep and Primed HS Skins
Details

 12-30-2017
4.00
Prepped all HS parts and Primed Some
Details

 12-29-2017
9.00
Edging and Deburring!
Details

 12-28-2017
6.00
Finished drilling HS.
Details
       

 12-27-2017
10.00
Finsh FS and Begin Drilling HS
Details
       

 12-26-2017
8.00
Front Spar Assy
Details
     

 12-25-2017
10.00
Completed first section of Empennage
Details
       

 12-21-2017
3.00
Unpack Box 2 of 2. Layout parts. Plan next step
Details
       

 12-20-2017
2.00
Unpack Box 1 of 2, Inventory
Details
       










Copyright © 2001-2020 Matronics. All Rights Reserved.