Powered By Kitlog Pro v2.0
Lorens Web Site
Onex
All
Work Logs Found:
160
Category Work Time:
1076 Hours
Date
Hours
Work Log Summary
Details
10-29-2016
1.00
First flight and at 10 hours
Details
10-27-2016
100.00
Engine change out
Details
10-26-2016
20.00
Cowl Modifications
Details
09-08-2014
1.00
Flight Test Phase
Details
03-25-2014
16.00
Removed and Replaced push rod tubes
Details
03-04-2014
0.50
Magnified Pictures of Circlips
Details
02-28-2014
4.00
Removed Fuel Tank for New Shut Off Valve Actuator
Details
02-23-2014
12.00
Removed the Red Menace and Installed Rotec TBI
Details
12-17-2013
3.00
Installed Orifice in Oil Pressure Line to Sending
Details
12-16-2013
2.00
Calibrated Oil Pressure and Oil Temp
Details
12-11-2013
2.00
Double Checking Cotter Keys and Wing Lock
Details
12-10-2013
2.00
Misc. Avionics Components
Details
12-09-2013
3.00
Final Tightening of Main Spar Pivot Bolts-Install
Details
12-06-2013
1.00
Wife tries out my new seat
Details
12-05-2013
12.00
Completed Balancing Ailerons and Installing Ailero
Details
12-04-2013
24.00
Completed Wiring and Configuring Dynon Skyview and
Details
10-23-2013
8.00
Pulling Wire and Terminating
Details
10-20-2013
8.00
Wiring Dynon Skyview and MGL V-6 Radio
Details
10-11-2013
2.00
Hauled home after painting
Details
10-10-2013
16.00
Paint-base coat and clear coar
Details
09-16-2013
8.00
Removed Cylinders toReplace Circlips
Details
09-07-2013
8.00
Paint Preparation and Paint
Details
08-29-2013
4.00
Final Assy of Main Gear wheels
Details
08-27-2013
8.00
Misc Wiring and Back up Battery
Details
08-26-2013
8.00
Installing Avionics
Details
08-22-2013
2.00
Final Assembly of Control Rod to Elevator
Details
08-21-2013
6.00
Fabricated Fairings
Details
05-12-2013
24.00
Modified Boat Trailer to Haul My Onex
Details
04-06-2013
10.00
Started Wiring Panel
Details
04-04-2013
1.00
Installed Engine Oil Cooler
Details
03-22-2013
4.00
Cutouts for breakers, EFIS, radios, and switches
Details
03-20-2013
16.00
Completed Inboard Wing Skinning
Details
03-18-2013
10.00
Install Wing Tips
Details
03-18-2013
1.00
Inside of outboard wing before installing wing ti
03-17-2013
8.00
Skin Inboard Left Wing
Details
03-14-2013
8.00
Install Landing Light
Details
03-12-2013
4.00
Install Electrical components
Details
03-04-2013
2.00
Installed Com Radio Antenna
Details
03-02-2013
4.00
Trim System Attachment
Details
02-28-2013
12.00
Installed Cabin Heater/Vent Duct and Battery Box
Details
02-18-2013
1.00
Test Fit Prop
Details
02-17-2013
5.00
Installed Trim system
Details
02-16-2013
4.00
Testing Nav,Position, and Strobe Lights
Details
02-16-2013
1.00
Installing exhaust
Details
02-11-2013
10.00
Fabricated wiring for position and wingtip strobe
Details
02-06-2013
1.00
Visit from EAA Technical Advisor
Details
01-30-2013
2.00
Assembled Throttle Quadrant
Details
01-29-2013
4.00
Fabricate and install Fuel Tank Shut Off
Details
01-28-2013
6.00
Started Adding Engine Accessories
Details
01-25-2013
8.00
Final Assembly of Engine and Attached to Mount
Details
01-08-2013
6.00
Final Engine assembly
Details
01-07-2013
6.00
Final Assembly of Engine
Details
01-06-2013
4.00
Took Measurements fo 7:0:1 Compression Ratio
Details
01-05-2013
4.00
Final Assembly of Engine
Details
01-04-2013
1.00
Crankcase Ready for final assembly
Details
01-03-2013
12.00
Checking and Insuring Connecting Rod Clearance
Details
01-01-2013
1.00
Install AeroVee Engine Mount
Details
01-01-2013
0.50
Drill, tap and bend Pitot Tube assembly
Details
12-31-2012
4.00
Fabricated and installed rudder spring attachment
Details
12-20-2012
40.00
Final touches on canopy.
Details
12-18-2012
8.00
Updrill and Cleco Fiberglass Wing tips
Details
12-16-2012
16.00
Cut and Fit Canopy and Canopy Frame
Details
12-07-2012
4.00
Started Fitting Canopy
Details
11-27-2012
12.00
Installed AirWard Nut Plate Kit
Details
11-17-2012
2.00
Installed Hub and Crankshaft Timing Gear
Details
11-15-2012
4.00
Test Fit Prop to hub
Details
11-15-2012
4.00
Installed Connecting Rods on Crankshaft
11-15-2012
4.00
Installed Connecting Rods on Crankshaft
Details
11-14-2012
6.00
Completed Prop Hub Installation
Details
11-13-2012
6.00
Complete Block Painting and Start Engine Assembly
Details
11-12-2012
8.00
Prep and Paint Engine Block
Details
11-09-2012
1.00
Checked Clearance on Oil Pump
Details
11-05-2012
4.00
Fabricated Engine Stand that Attaches to Shop A-Fr
Details
10-28-2012
1.00
Wing support for transit installed
Details
10-27-2012
6.00
Wing support assembly for transport
Details
07-17-2012
4.00
Installing Windscreen
Details
07-09-2012
4.00
Details
07-06-2012
12.00
Installing Heel Brakes
Details
06-26-2012
4.00
Rolled out of the shop
Details
06-14-2012
16.00
Aileron Assembly
Details
06-12-2012
6.00
Updrill and Assemble Aileron Counterbalance and Ai
Details
06-10-2012
8.00
Fabricate and Install Flaps
Details
06-06-2012
4.00
Installing Tail Wheel
Details
05-26-2012
8.00
Empanage and Horizontal Stabilizer Install
Details
05-22-2012
8.00
Install Controls and Control surfaces
Details
05-06-2012
8.00
Installed Rudder Pedals and Rudder Cable Pulleys
Details
04-30-2012
4.00
Fabircate and Install Rudder Cable Pulley Brackets
Details
04-27-2012
8.00
Torque and Torqe Seal Fuselage Hardware-Install Se
Details
04-25-2012
8.00
Install Brake/Axle on Landing Gear and Attach Gear
Details
04-24-2012
1.00
Right Angle Mini Drill
Details
04-22-2012
8.00
Updrill and Debur Rright Inboard Wing
Details
04-19-2012
5.00
Debur and Dimple Left Inboard Wing Assy.
Details
04-18-2012
6.00
Riveted Left Outboard Wing skin
Details
04-17-2012
6.00
Wing Pivot Doubler angles
Details
04-17-2012
1.00
Grind Clearance for Short Aileron Rod in Outboard
Details
04-14-2012
4.00
Received Engine Components
Details
03-19-2012
8.00
Skinning Inboard Wing Panels
Details
03-10-2012
8.00
Wing Lock/Fold assembly
Details
03-09-2012
8.00
Completing Paddle Assemblies and Skinning Wings
Details
03-08-2012
8.00
Assembling Right Outboard Wing Panel Substructure
Details
03-06-2012
8.00
Assembled Control Stick
Details
03-02-2012
16.00
Installed Ribs on right main spar
Details
02-27-2012
8.00
Installed left folding wing
Details
02-22-2012
6.00
Installed Inboard Paddle Assembly Attachments
Details
02-22-2012
8.00
Assembling left inboard wing
Details
02-21-2012
8.00
Double checking all plan revisions.
Details
02-20-2012
2.00
Jig for enlarging phenolic wheel pulley bore to 5
Details
02-16-2012
4.00
Made holes for rudder cables.
Details
02-15-2012
4.00
Keeping things straight
02-14-2012
8.00
Started installing ribs on left sid
Details
02-13-2012
8.00
Installed main and reart spars
Details
02-11-2012
3.00
Elevator Control Rod
Details
02-10-2012
2.00
Rev 1-31-12-Detail 02 R/L and 03 R/L-Cutout detail
Details
02-07-2012
4.00
Aligned and Drilled Landing Gear to Fuselage
Details
01-24-2012
1.00
Gear ready for final attachment
Details
01-23-2012
1.00
Drilling pilot holes
Details
01-22-2012
6.00
Establish Main Gear Centerline
Details
01-21-2012
4.00
Aileron Paddle Assembies
Details
01-20-2012
4.00
Assembled some small parts
Details
01-13-2012
1.00
Checked All Rivets for Proper Installation
Details
01-12-2012
12.00
Continued Assembly of Forward Fuselage
Details
01-09-2012
5.00
Started Firewall Assembly
Details
01-06-2012
6.00
Working on Fuselage
Details
01-04-2012
8.00
Assembled Forward Fuselage
Details
01-01-2012
6.00
Continued Fuselage Assembly
Details
12-28-2011
8.00
Continued Fuselage Assembly
Details
12-24-2011
16.00
Started Assembling Aft fuselage
Details
12-21-2011
1.50
Wooden Fence for cutting fiberglass
Details
12-19-2011
6.00
Attached Fiberglass Wing Tips
Details
12-12-2011
6.00
Dimpling and deburring
Details
12-07-2011
4.00
Details
12-06-2011
6.00
Completed riveting and bolting Left Main Spar -Fo
Details
12-02-2011
16.00
Left Outboard Folding Wing Assembly
Details
12-01-2011
0.10
EAA Chapter 1111 members visited my project
Details
11-22-2011
4.00
Left Hand Outboard Forward Fold Rib Assembly
Details
11-21-2011
5.00
Completed Rudder
Details
11-14-2011
6.00
Completed vertical tail assembly
Details
11-14-2011
1.00
Completed riveting of vertical tail
11-11-2011
1.00
Took the day off
Details
11-10-2011
4.00
Assembled Outboard paddle assemblies
Details
11-08-2011
6.00
Preassembled main spar
Details
11-07-2011
8.00
Outboard Wing Panel Substructure
Details
11-06-2011
4.00
Aft wing ribs attachments
Details
11-05-2011
8.00
Center Rear Main Spar Assembly and Outboard Rear S
Details
11-03-2011
3.00
Completed component storage
Details
11-02-2011
3.00
Assembled 2 Outboard Rear Spars
Details
11-01-2011
1.00
Riveting elevator
Details
11-01-2011
10.00
Assembling Elevator
Details
10-26-2011
4.00
Pre-assembled Empennage
Details
10-25-2011
4.00
Completed riveting horizontal tail skin
Details
10-23-2011
6.00
Final assembly for riveting
Details
10-21-2011
6.00
Installing Piano hinge for elevator
Details
10-20-2011
6.00
Final assembly of Horizontal Tail
Details
10-19-2011
8.00
Formed Forward Spar and PreAssembled
Details
10-18-2011
0.50
Working Small Parts
Details
10-17-2011
4.00
Receiving Hardware
Details
10-11-2011
4.00
Pre-assembled Vertical Tail Assy
Details
10-05-2011
3.00
Getting Started with a simple assembly.
Details
09-23-2011
1.00
Unloading Kits
Details
09-23-2011
2.00
Unloading Kits
SITE NAVIGATION
Contact Builder
Onex Home
Onex Home
Category
# Logs
# Hours
All
170
1134
Avionics
7
54
Brakes
1
12
Controls
10
59
Cowl
1
20
Electrical
4
30
Empennage
6
20
Engine
25
222
Engine Controls
1
2
Fairings
1
6
First Flight with Ca
1
1
Fuel System
1
4
Fuselage
15
96
Hardware
2
8
Horizontal Tail Asse
10
58
Instruments
2
4
Kit Arrives
10
58
Kits Arrive
3
7
Landing Gear
7
28
Lighting
2
14
Miscellaneous
15
92
None
1
4
Prop
1
1
Tools
1
1
Windscreen and Canop
3
60
Wings
40
273
Copyright © 2001-2024 Matronics. All Rights Reserved.
