Powered By Kitlog Pro v2.0
Ron Lendon's Aircraft Mfg.
Light Sport Recumbent Bike
None
100 Logs Found
Date
Hours
Work Log Summary
Details
07-20-2008
3.0
Change angle on Fork, more trail
Details
07-12-2008
5.0
Another Rear Axel Fix
Details
07-11-2008
3.0
Test ride faster
Details
07-11-2008
1.0
Repaired axel mount
Details
07-09-2008
4.0
Load it up and test ride
Details
07-08-2008
1.0
Assembled and test ride trailer
Details
07-02-2008
1.0
Rear carrier
Details
06-09-2008
3.0
Paint, Clean, Weld
Details
05-29-2008
2.0
Sandblast, clean and prime
Details
04-02-2008
4.0
Cable and test ride
Details
04-01-2008
1.0
Lengthen pedal crank support
03-31-2008
2.5
Handel bars and trim
Details
03-29-2008
2.0
Chain guide roller
Details
03-28-2008
2.0
Chain
Details
03-27-2008
1.0
Seat mounting
Details
03-27-2008
1.0
Seat Mounting
Details
03-26-2008
2.0
Seat work
Details
03-25-2008
2.0
Seat work
Details
03-23-2008
2.0
Make holes for mounting and split some tube
Details
03-23-2008
2.5
Made nylon chain rub blocks
Details
03-21-2008
1.0
Weld seat frame
Details
03-21-2008
2.5
Seat frame
Details
03-21-2008
1.0
Seat Frame
Details
03-19-2008
2.0
Shaped tubes for under seat
Details
03-17-2008
0.5
Shaped the seat pan plate
Details
03-17-2008
2.0
Finished shock brace and started seat.
Details
03-16-2008
2.0
Reset height and modify brace for rear shock
Details
03-15-2008
1.0
Remove rear shock brace
Details
02-27-2008
2.0
First time on wheels
Details
02-25-2008
0.5
Tack weld lugs for steering rod
Details
02-21-2008
3.5
Make steering link
Details
02-19-2008
2.0
Cross brace for spring
Details
02-17-2008
0.5
Setup frame for welding
Details
02-17-2008
0.5
Setup frame for welding
Details
02-17-2008
1.0
Finish welding rear frame swing arm
Details
02-16-2008
1.0
Join swing arm to front frame 4 of 4
Details
02-16-2008
1.0
Join swing arm to front frame 3 of 4
Details
02-16-2008
1.0
Join swing arm to front frame 2 of 4
Details
02-16-2008
1.0
Join swing arm to front frame 1 of 4
Details
02-15-2008
2.0
Kids 20" off road donor bike
Details
02-13-2008
2.5
Assembly of front suspension
Details
02-09-2008
1.0
Cut and fit Front Springs
Details
02-05-2008
2.5
Making tool to clean up inside of fork tubes
Details
02-01-2008
2.0
Weld outer fork tubes
Details
01-30-2008
2.5
Grind weld on inner, layout and cut outer forks
Details
01-28-2008
0.5
Weld fork tube inners
Details
01-28-2008
1.0
Cut inner fork tubes down
Details
01-28-2008
1.0
Cut down steering pivot outer.
Details
01-27-2008
1.0
Modify steering so it will work.
Details
01-27-2008
1.0
Modify steering so it will work.
Details
01-26-2008
1.0
Welding idler cap
Details
01-26-2008
1.0
Tear down front forks
Details
01-26-2008
1.0
Cap end of deraillier
Details
01-25-2008
2.0
Getting the idler sproket ready
Details
01-25-2008
2.0
Getting the idler sproket ready
Details
01-24-2008
1.5
Prep Swing Arm and Idler Sprocket
Details
01-21-2008
2.5
Main frame small components
Details
01-21-2008
3.0
Finished sizing bushings on swing arm
Details
01-20-2008
2.0
Seat post adjuster
Details
01-20-2008
2.0
Make up front derailleur post
Details
01-20-2008
2.0
Finish Derailleur post, begin seat adjuster
Details
01-19-2008
6.0
Made replacement pin for swing arm
Details
01-18-2008
2.0
Bore swing arm
Details
01-17-2008
1.5
Tear down donor bike and bore bushings
Details
01-13-2008
1.8
Prep and weld main tube parts together
Details
01-13-2008
1.8
Prep and weld main tube parts together
Details
01-13-2008
1.8
Prep and weld main tube parts together
Details
01-11-2008
3.0
Steering / handelbar pivot
Details
01-10-2008
1.0
Steering pivot and seat post holes
Details
01-09-2008
2.5
Made ends for seat brace & drilled HB pivot
Details
01-05-2008
2.5
Setup and machine steering stem
Details
01-05-2008
2.5
Machine steering stem hole
01-04-2008
2.5
Weld Rear Pivot Plates
Details
01-04-2008
2.5
Machine upright seatpost hole
Details
12-30-2007
3.0
Fabricate the Rear Pivot Plates.
Details
12-30-2007
3.0
Fabricate the Rear Pivot Plates
Details
12-28-2007
1.0
Weld slip pipe pedal crank housing
Details
12-28-2007
2.0
Fit main upright and make spacer
Details
12-28-2007
1.0
Cut main upright from old frame
Details
12-27-2007
0.5
Weld rear pivot
Details
12-27-2007
1.0
Prepare for welding
Details
12-27-2007
3.5
Prep on Slip Pipe for Pedal Crank.
Details
12-26-2007
3.0
Main Tube Machining
Details
12-26-2007
3.5
Machining rear suspension mount
Details
12-26-2007
1.5
Finish machining pivot hole
Details
12-25-2007
3.0
Adjust main tube for flat
Details
12-24-2007
2.5
Weld Main Tube
Details
12-24-2007
2.5
Weld Main Tube
Details
11-19-2007
2.5
Layout and cut Main Frame Tube
Details
11-19-2007
0.6
Layout & cut Main Frame Tube
Details
11-19-2007
2.5
Cut Main Frame Tube
Details
11-19-2007
0.5
Bend Main Frame Tube
Details
11-18-2007
2.0
Layout Main Frame Tube
Details
10-27-2007
2.0
Clean up cutoff parts
Details
10-26-2007
1.0
Cutoff parts of the frame
Details
10-25-2007
1.0
Cut off ears and grind pedal crank
Details
10-24-2007
1.0
Cut welds around pedal crank
Details
10-23-2007
2.0
Cut welds around pedal crank
Details
10-22-2007
3.0
Tear down
Details
10-18-2007
1.0
Core for the Light Sport Recumbent
Details
SITE NAVIGATION
Contact Builder
CZAW CH601XL Home
Light Sport Recumbent Bike Home
All
Miscellaneous
None
Shop Supplies
Zodiac CH 601 XL Home
Copyright © 2001-2013 Matronics. All Rights Reserved.
