KitLog pro

Powered By Kitlog Pro v2.0

Terrences Web Site
Work Logs Found: 58
Category Work Time: 190 Hours
 Date
Hours
Work Log Summary

Details

 01-22-2018
3.00
Bolt on root doubler & rivet front rib angles
Details
       

 03-29-2017
5.00
Rivets Spar Caps and Doubler to Spar
Details
       

 03-23-2017
6.00
Rivet doubler to web, shims, and front rib attach
Details
       

 03-16-2017
2.00
Fill misdrilled 3/32" holes in web and doubler wit
Details

 03-10-2017
3.00
Disassemble, deburr, scour, clean, and prime left
Details
     

 02-16-2015
3.00
Drill holes to attach left spar NR#1 to rib angles
Details
     

 02-15-2015
4.00
Drill nose rib anges for left spar NR#2, and NR#1
Details
       

 02-10-2015
6.00
Left spar prep for nose ribs
Details
       

 12-08-2012
8.00
Project Restart: Logging work done in 2012
Details
       

 12-06-2012
3.00
Practice oval cut in .040 & remove rivets
Details
     

 12-05-2012
3.00
Riveted the doubler to the right wing spar
Details
       

 12-01-2012
2.00
Prime Right Spar Doubler Parts
Details

 11-30-2012
4.00
Prepare doubler for right wing spar
Details
       

 02-24-2012
3.00
Blend out damage to L-bottom spar cap
Details
       

 05-29-2011
4.00
Reassemble left aileron w/ balance & hinge
Details
       

 05-28-2011
8.00
Continued.: balance arm & piano hinge
Details
     

 05-26-2011
8.00
Install balance arm & piano hinge on right aileron
Details
       

 02-17-2011
2.00
Reinstall aileron trim servo
Details
       

 02-11-2011
4.00
Deburr, scour, clean, and prime new aileron joints
Details
     

 01-22-2011
6.00
R aileron piano hinge conversion
Details
       

 01-16-2011
1.00
Revised mod process for right aileron
Details

 01-15-2011
2.00
Drill piano hinge attach holes to #30
Details
     

 01-05-2011
1.00
Drill inboard rib for left aileron counterbalance
Details
     

 11-13-2010
1.00
Drill out gussets for L-aileron
Details

 11-10-2010
5.00
Pilot drill L-aileron to hinge
Details
       

 11-07-2010
5.00
Prepare & pilot drill L Aileron for piano hinge
Details
       

 11-04-2010
2.00
Add L-angle back doubler behind aileron horn
Details
     

 11-03-2010
5.00
Mod left aileron to accept counter balance
Details
       

 10-25-2010
2.00
Disassemble left aileron to install balance, Hinge
Details
       

 10-21-2010
5.00
Drill & ream holes for left spar root doubler plat
Details
       

 08-13-2010
2.00
Remove web doubler from right spar
Details
       

 08-07-2010
2.00
Left spar cap rivet removal: bottom root
Details

 08-06-2010
3.00
Rivet the left top spar cap back together
Details
       

 08-06-2010
1.00
Confer with Zenair Re bend in R Spar at doubler
Details
       

 08-02-2010
3.00
Drill extra hole for AN3 bolt in extrusion & prime
Details
     

 07-29-2010
2.00
Back drill rivet holes through the spar cap extrus
Details

 07-23-2010
0.10
Remove rivets--continuation
Details

 07-23-2010
5.00
Remove rivets from left spar cap
Details
       

 07-21-2010
4.00
Drill wing attach 5/16 bolt holes to fit NAS bolts
Details
       

 07-09-2010
3.00
Drill the holes in the wing root doubler to final
Details
       

 07-03-2010
1.00
Replace one rivet
Details
       

 07-02-2010
3.00
Rivet spar web doubler in place
Details
       

 07-01-2010
2.00
Drill doubler and spar web, prepare for riveting
Details
     

 06-27-2010
5.00
De-rivet spar caps inboard & install web doubler
Details
       

 05-28-2010
2.00
Transfer punch & pilot drill holes in spar root do
Details
       

 05-27-2010
3.00
Rivet & bolt extrusion to right wing spar cap
Details
       

 05-26-2010
1.00
Set up work bench to rivet extruded angle to spar
Details
       

 05-24-2010
2.00
Deburr, scour, clean, and prime top spar cap joint
Details

 05-21-2010
0.01
Practice 3/16" Solid Riveting (cont.)
Details
       

 05-21-2010
2.00
Practice 3/16" Solid Riveting
Details
       

 05-04-2010
3.00
Remove bottom spar cap rivets & nose rib angles
Details
     

 03-24-2010
3.00
Drill spar cap extruded angle for rivets
Details

 03-23-2010
1.00
Position extruded angle for drilling
Details
     

 03-23-2010
3.00
Cut off spar cap angle and clean up spar cap
Details
       

 03-20-2010
1.00
Remove solid rivets from spar 2/2
Details

 03-20-2010
7.00
Remove solid rivets from spar 1/2
Details
       

 03-19-2010
2.00
Drill solid rivet heads on R wing spar
Details
     

 03-18-2010
8.00
Build jig to support main spar for riveting
Details
       










Copyright © 2001-2018 Matronics. All Rights Reserved.