Powered By Kitlog Pro v2.0
TAB'S WEB SITE
RV 12
All
Work Logs Found:
47
Category Work Time:
54 Hours
Date
Hours
Work Log Summary
Details
10-30-2013
0.50
Steps 1 & 2 Rivet Rib Clips and Radius Ribs
Details
10-29-2013
0.25
Steps 3, 4 & 5 Riveted The Spar Caps
Details
10-28-2013
0.25
Step 2 HS-1214 Rib Clips
Details
10-26-2013
0.50
Step 1 Cut the HS-1210 Hinge Stops
Details
10-19-2013
0.50
Rivet the Counter Balance Brackets onto HS Spar
Details
09-30-2013
0.50
Step 1 & 2 Riveting Rib Clips and HS Rib Radius
Details
02-24-2013
0.50
Drilling the HS Spar for Nut plates
Details
02-19-2013
0.25
Completed Steps 1 & 2
Details
02-10-2013
0.50
Steps 6 through 10
Details
02-09-2013
0.75
Steps 4 & 5
Details
02-03-2013
0.50
Riveting
Details
02-01-2013
0.25
Clecoed the spar caps and spacers for riveting
Details
01-27-2013
0.50
Steps 9 & 10
Details
01-20-2013
0.25
Making room to work.
Details
11-02-2012
0.25
Step 8 counter sinking.
Details
10-24-2012
1.25
Deburr, deburr & deburr
Details
07-29-2012
0.50
Stabilator Spar Prep
Details
06-16-2012
0.75
Completed Steps 1 & 2 - Done with the anti-servo t
Details
06-10-2012
3.00
Still working on the Anti-Servo Tabs
Details
05-06-2012
1.00
Continued working on the Anti-Servo Tabs
Details
03-18-2012
0.50
Completed step 5 for the right anti-servo tab
Details
03-11-2012
1.50
Building the Anti-servo Trim Tabs
Details
03-04-2012
1.25
Completing the rudder control surface.
Details
03-03-2012
0.75
Deburring continued on the Rudder Control surface.
Details
02-28-2012
0.50
Peeling & Deburing
Details
02-27-2012
0.50
Deburred and pop riveted the ribs to the rudder sp
Details
02-26-2012
2.00
Moving beyond the rivet size issue.
Details
01-29-2012
1.00
Getting back into the swing of Building
Details
11-27-2011
1.50
Rudder Spar Assembly Construction
Details
07-17-2011
1.00
Rudder control surface build.
Details
07-09-2011
1.00
Completed steps 4 - 6
Details
07-03-2011
2.00
Completed steps 2 & 3
Details
06-26-2011
2.00
Deburr and cleco the rudder skin.
Details
06-19-2011
1.00
Completed steps 8 & 9
Details
06-12-2011
2.00
Preping the rudder skin components.
Details
06-05-2011
2.50
Completed the vertical stablizer skeleton!
Details
05-22-2011
1.50
Mostly prepping all the parts for this section.
Details
05-15-2011
1.25
Rudder Spar - installed nutplates & prepped the ri
Details
05-08-2011
2.00
Countersink & Blind Rivet
Details
05-01-2011
4.00
Rudder Spar Cap - upper and lower Cont.
Details
04-27-2011
1.00
Rudder Spar Cap - upper and lower Cont.
Details
04-26-2011
1.00
Rudder Spar Cap - upper and lower Cont.
Details
04-18-2011
1.50
Rudder Spar Cap - upper and lower
Details
04-17-2011
2.00
Built the hinges for the rudder control surface.
Details
03-16-2011
4.00
Getting the tools together
Details
02-13-2011
2.00
Shop Setup & Kit Inventory
Details
01-28-2011
0.25
Received the Empennage Kit
Details
SITE NAVIGATION
Contact Builder
RV 12 Home
Category
# Logs
# Hours
All
47
54
Empennage
45
48
Miscellaneous
2
6
Copyright © 2001-2024 Matronics. All Rights Reserved.
