KitLog pro

Powered By Kitlog Pro v2.0

JAMESs Web Site
Work Logs Found: 36
Category Work Time: 96 Hours
 Date
Hours
Work Log Summary

Details

 11-13-2015
1.00
Dave came over after work and moved my wings
Details
       

 11-01-2015
2.00
Rudder return springs
Details
       

 09-20-2015
3.00
Cut out winglet bottom for rudder and add micro
Details
       

 09-14-2015
2.00
Used heat gun to round front winglet bottom
Details
       

 09-13-2015
4.00
Ribs installed and winglet bottoms floxed on to wi
Details
       

 09-12-2015
2.00
Working on winglet bottom
Details
       

 08-04-2015
3.00
Time to install the rudder horn.
Details
       

 08-02-2015
2.00
Nut platting rudder hinges
Details
       

 08-01-2015
4.00
Aileron fitting and installed the nut plates on hi
Details
       

 07-31-2015
2.00
Mounting rudders after hings cut outs
Details
       

 07-31-2015
3.00
More fitting on the ailerons
Details
       

 07-30-2015
2.00
Mounted the rudders hinges to the rudder with T88
Details
       

 07-29-2015
1.50
Rivet the hinges onto the ailerons
Details
       

 07-29-2015
1.50
Hang rudders and get hinges in place
Details
       

 07-28-2015
2.00
T88 structural with milled fiber and flox on hinge
Details
       

 07-27-2015
8.00
Wing prep for ailerons and hinges
Details
       

 06-28-2015
2.00
Trim rudder wells, sand and micro
Details
     

 06-25-2015
2.00
Trim winglet wells and rudder wells. Glass rudder
Details
       

 06-21-2015
3.00
Glass in winglet wells
Details
       

 06-20-2015
4.00
Glassed in rudder wells and elevator ends
Details
       

 06-19-2015
2.00
Sanded rudder wells and added were needed
Details
       

 06-14-2015
3.00
It was time to cut out the rudders
Details
       

 06-02-2015
2.00
Glass ends of ailerons and cut hinges
Details
       

 05-31-2015
3.00
Time to glass up the ailerons with one bid
Details
       

 05-31-2015
3.00
Prep ailerons for the one bid that goes on
Details
       

 05-30-2015
0.00
Resin in torque tube and backing plate
Details
       

 05-30-2015
5.00
Prep and install torque tube and hinge backing pla
Details
       

 05-28-2015
3.00
Aileron construction & counterweights
Details
       

 05-26-2015
1.00
Trim bid at the edge of the Aileron well
Details
       

 05-25-2015
6.00
Glassed in Aileron wells tonight
Details
       

 05-22-2015
3.00
Sand more on aileron wells
Details
       

 05-22-2015
3.00
Aileron well grind out and sand to shape.
Details
       

 05-21-2015
2.00
Set up for aileron cut out and then cut
Details
       

 11-16-2014
4.00
Glass wing voids
Details
       

 03-04-2014
1.00
Glass wing bolt holes with UNI cloth
Details
     

 12-10-2013
1.50
Wing attach bolt hole reinforcment
Details
       










Copyright © 2001-2024 Matronics. All Rights Reserved.