KitLog pro

Powered By Kitlog Pro v2.0

JAMESs Web Site
Work Logs Found: 155
Category Work Time: 533 Hours
 Date
Hours
Work Log Summary

Details

 04-17-2020
3.00
Doors are ready for Smooth prime.
Details
     

 04-12-2020
4.00
Fill and Sand on doors
Details
       

 02-01-2019
4.00
Sand fill and prime
Details
       

 05-09-2018
3.00
Sand and gap on cowlings
Details
       

 04-24-2018
1.00
Sand upper cowling.
Details
       

 04-19-2018
1.00
Micro on upper cowling
       

 04-12-2018
2.00
Micro on strake was sanded gapped and primed.
Details
       

 04-08-2018
2.00
Added micro to sanded areas on the strake and wing
Details
     

 04-07-2018
4.00
Gap wing and cut cowling for fitting.
Details
       

 02-12-2018
5.00
I gaped parts for paint.
Details
       

 12-05-2017
2.00
Sand the filler one more time thrn spray primer.
Details
       

 11-29-2017
8.00
Fill and sand over days to get to primer.
Details
       

 11-21-2017
2.00
Sand and fill. Ready for primer.
Details
       

 11-16-2017
3.00
Sand and fill on wings to strake
Details
       

 11-12-2017
3.00
Blending the strake to the wing. Sand and fill.
Details
       

 03-08-2017
4.00
Fill and sand pinholes and primer.
Details
       

 03-06-2017
3.00
Fill and sand with another shot of K2 primer.
Details
       

 03-05-2017
5.00
Sand and fill on lower cowling. Exhaust tubes.
Details
       

 03-02-2017
4.00
Sand and prime lower cowling
Details
       

 02-28-2017
4.00
Time to sand the micro that was on the cowling.
Details
       

 11-23-2016
2.00
Smooth prime landing gear doors and fuselage area.
Details
       

 11-22-2016
2.00
Sand and fill on fuselage and main gear doors.
Details
       

 11-21-2016
3.00
Sand and prime main grear leg doors and fuselage
Details
       

 11-18-2016
2.00
Fill in at grear leg doors
Details
       

 10-26-2016
3.00
Pinhole hunting and then prime
Details
       

 10-25-2016
3.00
Sand and spray sealer on
Details
       

 10-24-2016
4.00
Fill and sand on gear leg bumps
Details
       

 05-22-2016
1.00
Micro on the main gear legs
Details
     

 01-24-2016
8.00
Sand, prime, fill, sand prime
Details
       

 01-21-2016
4.00
Sand on dog house and hatch, then fill at canard
Details
       

 01-18-2016
3.00
More sand and fill on dog house and hatch
Details
       

 01-17-2016
3.00
Dog housed sanded, micro on, front hatch filled
Details
       

 01-16-2016
2.00
Filled in dog house low spots with micro
Details
     

 01-13-2016
2.00
Got some areas primed and built wing 4x4 jacks
Details
       

 01-12-2016
2.00
Elevator torque tube hole cleaning up and level
Details
       

 01-11-2016
1.00
Fill and sand on elevator torque tube holes
Details
       

 01-10-2016
2.00
Sand on fuselage in a few areas
Details
     

 01-09-2016
2.00
More sanding and priming on the plane and panel
Details
       

 01-07-2016
2.00
Sand and fill on instrument panel and plane
Details
       

 01-05-2016
1.00
Micro pinholes on instrument panel
Details
     

 01-03-2016
2.00
Sanded instrument panel and control surfaces then
Details
       

 12-21-2015
2.00
Fitting dog house
Details
       

 12-07-2015
2.00
Finish blocking and spray 4 coats of smooth prime
Details
       

 12-06-2015
5.00
Sand and fill to prime day on the Canard
Details
       

 12-05-2015
4.00
Sanded the 2 applications of micro, primed and fil
Details
       

 12-01-2015
1.00
Micro on the canard tips
Details
       

 11-15-2015
3.00
Fill and sand then fill and sand then Smooth Prime
Details
       

 11-12-2015
2.00
Prime canard and get wings ready to move out.
Details
       

 11-11-2015
4.00
Sand, prime, fill, sand Canard
Details
       

 11-09-2015
2.00
Micro on bottom of Canard
Details
       

 11-08-2015
4.00
Fill and prime day
Details
       

 11-07-2015
3.00
More of the fill and prime stuff
Details
       

 11-04-2015
1.00
Smooth Prime winglet bottoms and canard.
Details
       

 11-03-2015
4.00
Prime, sand , fill one more time
Details
       

 11-01-2015
4.00
More sand and fill on winglets and canard
Details
       

 10-29-2015
2.00
Got some primer on and did some pinhole work
Details
       

 10-25-2015
7.00
Fill and sand with Spot-lite in low areas
Details
       

 10-19-2015
2.00
I met my goal tonight spraying primer
Details
       

 10-18-2015
6.00
More sanding on the wings and Canard
Details
       

 10-17-2015
4.00
More sanding and filling of the winglet bottom & C
Details
       

 10-15-2015
2.00
Sand and fill winglet bottom
Details
       

 10-13-2015
3.00
Sand and fill on Canard. Sand on bottom winglet.
Details
       

 10-12-2015
5.00
Sand and prime Canard. Fill winglet bottoms
Details
       

 10-10-2015
3.00
One bid over foam to increase strength and get rea
Details
     

 10-06-2015
2.00
Add foam to winlet bottom to match rudder width.
Details
       

 09-15-2015
2.00
Time to apply level coat of icing on canard
Details
       

 09-11-2015
3.00
Sand, fill, sand, fill, on Canard
Details
       

 07-21-2015
3.00
Sand all the wells and hand paint on primer. Bid w
Details
       

 07-19-2015
6.00
Block sand and fill to Smooth Prime
Details
       

 07-05-2015
6.00
More sanding and filling Primer was sprayed on
Details
       

 07-04-2015
4.00
Fill and sanding on the control surfaces
Details
       

 07-03-2015
3.00
Sanded the micro and primed the control surfaces
Details
       

 06-18-2015
2.00
I sanded the ailerons at the top edge
Details
       

 06-13-2015
3.00
Sand elevators and ailerons then add Alpha-poxy
Details
     

 06-08-2015
3.00
Sand elevators and ailerons were the glass butted
Details
       

 06-02-2015
1.00
Sand Alpha poxy micro on elevators
Details
     

 05-26-2015
2.00
Sand and apply Alpha poxy micro to elevators
Details
     

 05-20-2015
5.00
Filled last low spot and Smooth primed wings
Details
       

 05-17-2015
4.00
Fill the last low areas and prime them
Details
       

 05-16-2015
6.00
I got the filling and sanding to priming today
Details
     

 05-15-2015
6.00
Spar work needed
Details
       

 05-14-2015
4.00
Block out K2 primer and add Spot-Lite bondo
Details
       

 05-12-2015
3.00
Sand and fill on speed brake
Details
       

 05-11-2015
3.00
Prep for K2 primer and sprayed out 2 coats
Details
       

 05-10-2015
6.00
More fill and sanding bondo
Details
       

 05-09-2015
5.00
More of that fill and sand
Details
       

 05-07-2015
2.00
More sanding and filling
Details
     

 05-05-2015
3.00
Sand and add Spot-Lite bondo
Details
       

 05-03-2015
4.00
Spot-Lite bondo is the tool to use for me
Details
       

 04-28-2015
2.00
Sand sealer primer and add Z Grip bondo
Details
       

 04-27-2015
2.00
Sand micro and seal prime top wings
Details
       

 04-26-2015
5.00
Sand wings add micro. Sand speed brake & prime
Details
       

 04-25-2015
4.00
Filling and sanding on the wings and speed brake
Details
       

 04-23-2015
3.00
We got the wings top side up again
Details
       

 04-19-2015
4.00
Primed bottom wing one more time
Details
       

 04-16-2015
2.00
Sanding the bottom fueslage and hach
Details
     

 04-14-2015
3.00
Finished the bigger spots and now ready for primer
Details
       

 04-07-2015
3.00
Found a few bigger areas needing work
Details
       

 04-03-2015
5.00
More of that fun sanding and filling stuff
Details
       

 03-28-2015
4.00
Sand primer and Spot-Lite fill
Details
       

 03-19-2015
2.00
Prime wings and fuselage
Details
       

 03-16-2015
2.00
Fill and sand in Canard- Fuselage area.
Details
       

 03-15-2015
3.00
More filling and sanding
Details
       

 03-10-2015
3.00
More sanding on the NACA inlets
Details
       

 03-08-2015
5.00
Taped windows and did bondo work
Details
       

 03-07-2015
5.00
Working on fuselage now with Spot-Lite bondo
Details
       

 03-03-2015
2.00
Sand Spot -Lite and micro added
Details
       

 03-02-2015
2.00
Block sand Pilot strake and spot fill
Details
       

 03-01-2015
4.00
Co-Pilot strake sanding and filling
Details
       

 02-28-2015
5.00
Blocked out the wings today with the air board 180
Details
       

 02-26-2015
2.00
Sand and get ready for primer
Details
       

 02-24-2015
2.00
Sand big area tonight and small stuff got work
Details
       

 02-23-2015
4.00
More filling in not happy areas
Details
       

 02-22-2015
8.00
Filling and sanding low areas on strakes
Details
       

 02-15-2015
4.00
Block out strake and add filler were needed
Details
       

 02-09-2015
5.00
Sanding and blocking to get the primer on.
Details
       

 02-08-2015
4.00
More of the same. Primer on primer off and fill
Details
       

 02-07-2015
5.00
More sanding and putty filling
Details
       

 02-05-2015
4.00
Still filling and sanding
Details
       

 01-31-2015
4.00
Blocked out primer with 3’ and then air board
Details
       

 01-30-2015
3.00
Sand and fill winglet filet. Heat wing ends to sha
Details
       

 01-29-2015
6.00
More sanding and primer on strakes Happy
Details
       

 01-28-2015
4.00
Sanding and filling today again
Details
       

 01-27-2015
4.00
Sanding filling and more sanding
Details
       

 01-26-2015
3.00
Sand off primer for low areas and pinholes
Details
       

 01-25-2015
6.00
More sand and fill to priming
Details
       

 01-23-2015
4.00
Time to use the bondo in low areas
Details
       

 01-22-2015
0.00
Next on the list
Details
       

 01-22-2015
5.00
Added micro to low areas on winglet
Details
       

 01-21-2015
5.00
Pinhole sanding and blocking out the primer
Details
       

 01-20-2015
2.00
Working on fuselage stakes and fuselage radius
Details
       

 01-20-2015
2.00
Sanding the strakes and pin hole patrol
Details
       

 01-19-2015
5.00
Getting ready for priming
Details
       

 01-18-2015
2.00
Working on fuselage strakes
Details
       

 01-17-2015
5.00
Finish blending wings and now onto the strakes
Details
       

 01-16-2015
2.00
Again sand and fill wings. This may go on for some
Details
       

 01-15-2015
5.00
Sand and fill wings & Fuselage
Details
       

 01-13-2015
6.00
Sand wings and add micro Fuselage work too
Details
       

 01-12-2015
2.00
Sand fuselage. Add micro to wing
Details
       

 01-12-2015
2.00
Sand and fill in low areas on wings
Details
       

 01-11-2015
3.00
Co-Pilot side sand an icing
Details
       

 01-10-2015
3.00
Fill in the strake areas with micro
Details
     

 01-09-2015
2.00
Sand and fill low areas on wings
Details
       

 01-08-2015
4.00
Fill and sand
Details
     

 01-07-2015
4.00
Fill low spots on wings
Details
       

 01-04-2015
4.00
Sand wings
Details
     

 01-03-2015
4.00
Fill and sand on Fuselage
Details
       

 12-29-2014
6.00
Fill bottom of wings with sandable micro
Details
       

 12-16-2014
4.00
Sand and micro wings
Details
       

 12-09-2014
3.00
Sand and flip wings to night
Details
       

 12-08-2014
4.00
Sand and fill wings
Details
       

 12-04-2014
4.00
Sand wings and winglets
Details
       

 11-30-2014
6.00
Filling Wings and Winglets with Micro
Details
       

 11-29-2014
6.00
Filling wings and winglets with VelociPoxy and Mic
Details
       

 11-20-2014
4.00
Micro balloons and Alpha poxy on main wing spar
Details
       










Copyright © 2001-2024 Matronics. All Rights Reserved.