KitLog pro

Powered By Kitlog Pro v2.0

Jims RV-8
Work Logs Found: 196
Category Work Time: 447 Hours
 Date
Hours
Work Log Summary

Details

 04-20-2019
1.00
NACA vent bonding to wing skin
Details
       

 07-15-2014
4.50
Re-purpose the wing stand into a wing cradle
Details
       

 06-05-2014
1.50
W-818 pushrods
Details
       

 06-04-2014
3.00
re-making W-818 aileron pushrod
Details
       

 06-03-2014
2.50
fuel tank wiring & tank installation
Details
       

 05-26-2014
2.00
Final Tank test - 2 passes
Details
       

 04-10-2014
1.00
rivet the pushrods!
Details
       

 04-09-2014
1.30
Prime aileron pushrods
Details
       

 04-03-2014
1.80
drilled pushrod rivet holes
Details
       

 03-27-2014
1.00
Aileron pushrods
Details
       

 02-27-2014
2.90
Left flap complete
Details
       

 02-24-2014
1.00
Left Flap - rivets
Details
       

 02-20-2014
3.20
Right flap - el finito
Details
       

 02-19-2014
2.20
more flap work - riveting lower skins, right flap
Details
       

 02-17-2014
3.10
flaps - back to work
Details
       

 02-15-2014
0.50
Replace Leaking tank rivet
Details
       

 01-30-2014
1.00
prime flap connector plate/angle
Details
     

 01-29-2014
2.20
Bending flap support plate
Details
       

 01-23-2014
1.60
Rivet flap brace & aileron gap fairing-RIGHT
Details
       

 01-22-2014
1.50
Rivet flap brace & aileron gap fairing-LEFT
Details
       

 01-22-2014
1.50
Aileron gap fairings - Prep.
Details
     

 01-21-2014
1.80
flap braces - prep
Details
       

 01-21-2014
0.70
Aileron brackets - left wing, installed
Details
     

 01-20-2014
0.40
take off left tank, flip wings from cradle to work
Details
     

 01-18-2014
2.20
Aileron Brackets - Right wing (some on left)
Details
       

 01-17-2014
1.20
finished off rivets on the top skin, left wing
Details
     

 01-16-2014
5.20
Left Wing Skins – 2. Two-man work
Details
       

 01-16-2014
4.20
Left Wing Skins – 1. One-man work in prep for two
Details
       

 01-15-2014
3.00
Right top skins – more work
Details
     

 01-14-2014
3.00
Right Wing skin rivets!
Details
       

 01-12-2014
2.00
Wing skin - Final lap joint work
Details
       

 01-12-2014
0.70
Flaps – cleco together and store
Details
       

 01-11-2014
5.40
final prep of flaps
Details
       

 01-10-2014
2.20
Still More Flap work
Details

 01-09-2014
3.10
More Flap work
Details
       

 01-08-2014
1.30
Straightening the left wing on wing stand
Details
       

 01-08-2014
2.00
Rivet spanwise row on Right leading edge
Details
       

 01-07-2014
0.50
Right leading edge rivet to spar
Details
       

 01-05-2014
2.20
Flap hinges drilled
Details
       

 01-04-2014
2.50
Flaps
Details
       

 01-04-2014
1.50
Begin riveting the right leading edge...
Details
       

 01-03-2014
2.00
Back to the Top skins - finally
Details
       

 01-01-2014
1.40
aileron brackets - rivet & final drill
Details
       

 12-31-2013
1.50
aileron brackets
Details
       

 12-26-2013
2.00
Riveted the left aileron w/ Holden
Details
       

 12-25-2013
1.00
start to rivet the left aileron
Details
       

 12-23-2013
3.50
left aileron prep
Details
     

 12-22-2013
2.50
finished right aileron
Details
       

 12-22-2013
2.00
continued riveting the right aileron
Details
       

 12-21-2013
4.10
right aileron prep, start riveting
Details
       

 12-20-2013
2.30
aileron work - left & right
Details
       

 12-19-2013
3.00
right aileron work
Details
     

 12-17-2013
1.80
110 years ago.... and more spar work
Details
       

 12-16-2013
2.50
aileron spar work
Details
       

 12-15-2013
1.20
back-rivet the aileron stiffeners
Details
       

 12-14-2013
4.20
Aileron stiffeners - prep work
Details
     

 12-13-2013
2.00
drilled left leaking rivet - started ailerons
Details
       

 12-11-2013
1.50
test Right and Left tank
Details
       

 12-10-2013
0.00
test right fuel tank...kinda...part 2
Details
     

 12-10-2013
2.00
test right fuel tank...kinda...
Details
       

 12-07-2013
2.30
Stage the wings for riveting prep
Details
     

 12-07-2013
2.00
Rivet right leading edge
Details
       

 12-05-2013
2.40
finish riveting left wing leading edge
Details
       

 12-04-2013
0.70
start riveting leading edge
Details
       

 11-30-2013
0.50
finalize the pitot mast
Details
       

 11-20-2013
1.00
cut hole in skin...no really...part 2
Details
       

 11-19-2013
1.00
cut hole in skin...no really...part 1
Details
       

 11-18-2013
2.70
rolling edges
Details
     

 11-15-2013
2.50
Skin test fit - Wing assesment
Details
       

 11-14-2013
0.20
covered phantom holes in right bottom
Details
     

 11-13-2013
1.10
Countersink right spar bottom & primed
Details
     

 11-12-2013
1.20
Countersink left spar bottom & primed
Details
     

 11-10-2013
3.70
countersink/primed top of spars + riveted "p" hole
Details
       

 11-09-2013
1.80
Scuffing, cleaning, priming skins & doublers
Details
       

 11-08-2013
3.50
W-702 (L/R)
Details
     

 11-08-2013
1.80
final skin prep - W-703 (L)
Details
     

 11-05-2013
1.20
more skin prep
Details

 11-01-2013
1.00
prep wing walk doublers
Details
     

 10-31-2013
3.00
Top side wing Rib prep
Details
       

 10-30-2013
1.20
Top Skin prepping – 3
Details
     

 10-29-2013
1.90
Top Skin prepping – 2
Details
       

 10-27-2013
6.50
Wing Skin work - 1
Details
       

 10-26-2013
6.00
Right and left tank are SEALED!
Details
       

 10-26-2013
2.20
Deburring / Dimpling skin W8042R
Details
       

 10-25-2013
3.20
Right tank - Z brackets
Details
       

 10-24-2013
3.90
Right tank baffle
Details
       

 10-23-2013
2.50
More W-423 joint plate work
Details
     

 10-22-2013
1.50
W-423 joint plate
Details
     

 10-21-2013
3.40
Right Leading Edge work
Details
     

 10-20-2013
2.30
Z brackets - Left tank
Details
       

 10-19-2013
5.30
left tank - baffle on, riveted
Details
       

 10-18-2013
0.30
checked fuel senders with multimeter
Details
     

 10-17-2013
1.50
Tank plumbing fittings – left tank
Details
       

 10-17-2013
1.00
Prime Left LE ribs and skin
Details
     

 10-16-2013
3.10
Leading edge work - left wing
Details
       

 10-14-2013
1.00

Details

 10-13-2013
1.50
Right tank sender unit float work
Details
     

 10-13-2013
1.50
Final install of vent tube/return line – Rt tank
Details
       

 10-13-2013
2.40
Back to the Leading Edge - access plate
Details
     

 10-12-2013
2.50
Tube flairing
Details
       

 10-10-2013
3.00
Riveted T405/T410 - right tank
Details
       

 10-07-2013
1.50
riveted outer ribs on right tank
Details
       

 10-05-2013
4.00
rivet interior ribs - right tank
Details
       

 10-04-2013
3.40
clearing holes, 2 interior ribs riveted,
Details
       

 10-03-2013
2.90
right tank interior ribs pro-sealed
Details
     

 09-30-2013
2.80
rivet outer ribs - encapsulate rest of rivet heads
Details
       

 09-29-2013
3.00
Left tank - T410 & T405
Details
       

 09-28-2013
7.90
rivet interior ribs in left tank, seal/cleco outer
Details
       

 09-26-2013
0.80
clean up of misc proseal on left interior ribs
Details
     

 09-25-2013
3.60
Left tank interior ribs pro-sealed
Details
       

 09-24-2013
1.00
Fuel sender float in left tank
Details
       

 09-23-2013
1.30
proseal the right tank anti-rotate brackets
Details
       

 09-22-2013
2.20
anti-rotate and anti-hang
Details
       

 09-19-2013
1.00
anti hang for flop tube
Details
       

 09-18-2013
2.50
misc tank work
Details
       

 09-17-2013
1.50
left tank trap door and hole patch
Details
     

 09-08-2013
2.00
Right tank sender unit
Details
       

 09-07-2013
2.70
Left tank sender unit
Details
       

 08-29-2013
3.50
stiffeners riveted Left Tank
Details
       

 08-28-2013
2.50
riveted Right tank drain and filler neck
Details
       

 08-28-2013
1.20
left tank follow up - 8/28/13 #2
Details
       

 08-27-2013
5.00
washed right tank parts and backriveted stiffeners
Details
       

 08-27-2013
3.00
Deburred/edged and dimpled the right tank skin
Details
     

 08-26-2013
2.20
debur / dimple left tank ribs
Details

 08-25-2013
2.60
deburred the left tank skin
Details
       

 08-24-2013
2.60
made the 10 trap doors
Details
       

 08-24-2013
2.00
flop tube hole drilled
Details
     

 08-24-2013
0.50
de-blued the right tank skin
     

 08-23-2013
1.70
T714 clips, T-410's drilled, c/s T406B
Details
       

 08-22-2013
2.60
Riveted T407 rings, drilled filler & drain holes
Details
       

 08-21-2013
2.40
T-407 and rib work
Details
       

 08-19-2013
1.30
drill the access plate in right wing tank rib
Details
     

 08-18-2013
0.60
cut the hole in the inboard tank rib
Details
     

 08-17-2013
5.00
drilled tank attach brackets
Details
       

 08-08-2013
0.50
tank attach bracket #3
Details

 08-07-2013
1.30
T-405 tanks attach #2
Details
       

 08-06-2013
2.00
T-405 Tank attach angle
Details
       

 08-05-2013
0.80
Disassemble tanks/LE's
Details
     

 08-02-2013
0.50
Drilled stiffeners in right tank
Details

 08-01-2013
3.10
tank - stiffeners countersinking baffle holes
Details
       

 07-31-2013
1.50
Tank Stiffeners
Details
       

 07-30-2013
3.50
final drilled both tanks - tank to rib holes
Details
       

 07-28-2013
3.75
Right tank baffle/z-bracket drilling
Details
       

 07-27-2013
7.00
z-brackets measured, drilled...Left Tank clecoed
Details
       

 07-26-2013
2.00
left tank pre-assembly
Details
       

 07-24-2013
1.00
another wing skin
Details
     

 07-15-2013
0.70
Drilling (ruining) Z brackets - 3
Details

 07-14-2013
1.80
Z bracket marking - 2
Details
       

 07-14-2013
2.30
tank ribs – debur, flute, straighten – 1
Details
     

 07-11-2013
1.00
installed wing conduit
Details
       

 07-09-2013
1.10
finished drilling out leading edge - Left wing
Details
       

 07-06-2013
7.00
leading edge work - drilling
Details
       

 07-01-2013
0.30
undo - recheck left leading edge
Details

 06-30-2013
4.10
Ready the leading edge ribs for right wing – cleco
Details
       

 06-29-2013
0.90
Debur/Flute/Straighten the leading edge ribs – L
Details
       

 06-26-2013
3.00
Flap/aileron gap seals/supports – rt wing & Cradle
Details
     

 06-24-2013
1.30
Flap/aileron gap seals/supports – left wing
Details

 06-22-2013
2.75
drilled all bottom wing skins
Details
       

 06-20-2013
3.50
both top skins on and drilled
Details
     

 06-19-2013
8.00
finished wing stand, doublers drilled, top skins o
Details
       

 06-18-2013
3.50
more main wing rib rivets - wing stand
Details
       

 06-17-2013
3.80
Wing rib to spar rivets
Details
       

 06-16-2013
0.50
touch up priming of the ribs
Details

 06-15-2013
4.00
redrilled holes, re-washed,dried...then primed
Details
       

 06-14-2013
4.00
drilling more conduit holes- re-drilling
Details
       

 06-13-2013
3.50
drilling conduit holes
Details
       

 06-09-2013
3.50
continued wing skeleton work
Details
     

 06-08-2013
2.75
finished the main ribs - clecoed together some win
Details
       

 06-07-2013
1.50
flute and straighten main wing ribs
Details
       

 06-06-2013
2.00
build flange straightening tool
Details
       

 05-30-2013
1.00
rib deburring - continued... 28 down / 26 left
Details
       

 05-29-2013
1.00
wing rib deburring
Details
     

 05-26-2013
2.25
deburring wing ribs - 22 down / 32 to go
Details

 05-25-2013
4.25
Deburred 14 wing ribs
Details
       

 05-24-2013
0.75
Started the wing ribs
Details
       

 05-23-2013
2.50
rivet rear spar
Details
       

 05-22-2013
2.00
Clean/prime rear spar parts
Details
     

 05-21-2013
1.50
More deburring of drilled holes
Details
     

 05-20-2013
1.30
Deburring rear spar
Details
       

 05-16-2013
1.50
Aileron pushrod holes & doublers
Details
     

 05-15-2013
3.25
Start the rear spar
Details
       

 05-14-2013
2.00
Tie-down assembly bolted to spar
Details
       

 05-13-2013
2.00
drilled and primed tie down assembly/spacers
Details
       

 05-12-2013
0.50
Drilled the right tie down/spacers
Details
       

 05-11-2013
0.00
(cont.) Tie down-assembly - left spar
Details
       

 05-11-2013
0.00
(cont.) tie down spacers, tie down on Left spar
Details
       

 05-10-2013
7.50
Access plates and more platenuts
Details
       

 05-04-2013
1.50
CS and installing more platenuts
Details
     

 05-03-2013
4.25
Rivetting on the tank platenuts
Details
       

 05-02-2013
3.25
Main spar platenuts
Details
       

 05-01-2013
1.00
Start the Main Spar
Details
       

 04-25-2013
1.00
begin the wings...preliminary
Details
       

 03-23-2013
9.00
Clean up / organize the wing kit
Details
       

 03-08-2013
0.00
Inventory Wing kit
Details
       

 03-07-2013
0.00
Wing kit arrived today!
Details
       

 12-28-2012
0.00
Ordered the wings today!!
Details










Copyright © 2001-2020 Matronics. All Rights Reserved.