I clecoed both canopy skirts and the inside skirts in place and checked their fit along the top and bottom edges of the skirts. I inserted four screws and nuts along the top thru the canopy to see how the right skirt lies against the canopy. There were a few puckers in the center of the skirt. I did the same on the left skirt and the skirt was mostly smooth along the top. I cut off the bottom front 11'' of both skirts with the cut-off wheel in the Dremel and cleaned up the edges. The bottom of the right skirt lies flat against the fuselage and the left sticks out about 1/8'' or so away from the fuselage.
