Glenn Whitehouse - Experimental Aircraft Builder's Log

GLENN'S WEB SITE

Work Logs Found: 91

Category Work Time: 229 Hours

Date	Hours	Work Log Summary	Details
08-18-2015	3.00	Riveted Wing skins	Details


08-13-2015	0.50	Installed fueler neck doublers	Details


08-07-2015	3.00	Re-installed the wing skins.	Details


08-06-2015	2.00	Installed the ELT	Details


08-06-2015	5.00	Install fuel tanks in center wing	Details


08-05-2015	2.00	Installed Poly Carbonite in cargo area	Details


08-05-2015	2.00	Install aileron cable pullys	Details


08-05-2015	1.00	Aileron push tubes	Details


08-05-2015	2.00	Aileron bell crank	Details


07-14-2015	0.50	Cargo are floor tray	Details


07-10-2015	6.00	Primed parts	Details


07-09-2015	8.00	Prepped and primed the front upper skins	Details


07-09-2015	0.50	Drilled Polycarbonate	Details


07-08-2015	8.00	Prep and prime upper aft skins	Details


07-08-2015	1.00	Painted storage area.	Details


07-07-2015	1.50	Riveted cargo holes and inspection hole	Details


07-07-2015	7.00	Primed lower center skins


07-07-2015	0.50	Install Flap motor	Details


07-06-2015	1.80	Upper wing stiffener	Details


07-06-2015	2.50	Lower center cargo door	Details


07-06-2015	2.50	Center wing lower skin	Details


07-06-2015	2.30	Cargo bay floor tray	Details


07-05-2015	1.80	reinstalled parts for lower right	Details


07-05-2015	8.00	Lower right center wing	Details


07-04-2015	1.00	Reinstalled left nose rib and stiffener	Details


07-04-2015	7.50	Prep and prime	Details


07-03-2015	4.00	Drilled bttom of center wing	Details


07-03-2015	5.00	Drill top of center wing	Details


07-02-2015	4.00	Drilled skin to rear spar	Details


05-30-2015	1.50	CT-095 installation	Details


05-07-2015	2.50	Right top skin to new nose rib	Details


05-07-2015	2.00	made doublers for new nose ribs	Details


05-06-2015	5.00	Reinstalled New nose ribs	Details


05-06-2015	0.50	New AC-CT-052	Details


05-06-2015	1.00	ELT antenna bracket	Details


05-05-2015	4.00	Recieved Center wing back	Details


04-01-2015	3.00	shipop center wing to Lockwood	Details


03-04-2015	16.00	Skin install	Details


03-04-2015	2.00	Center wing	Details


02-19-2015	6.00	Finished the access hole in lower center wing	Details


02-10-2015	1.00	Stiffeners	Details


02-08-2015	1.50	Stiffeners	Details


02-08-2015	1.20	Lower skins attached	Details


02-08-2015	2.50	Inspection hole doublers	Details


02-08-2015	0.40	Filler neck seals	Details


02-08-2015	5.00	Center wing access panel doubler	Details


02-07-2015	2.00	Lower center skins	Details


02-07-2015	0.50	install front down tubes	Details


02-07-2015	1.00	Compression tubes	Details


02-03-2015	1.00	Mount center wing	Details


02-02-2015	0.30	Strut attach points	Details


02-02-2015	1.20	Down tube ends	Details


02-02-2015	3.00	Cut skin for accesss panel	Details


02-01-2015	1.20	Attach struts	Details


01-27-2015	8.00	Added nose ribs in front of fuel tanks	Details


01-17-2015	1.50	Rear spar brackets	Details


01-16-2015	0.70	Stiffener panels	Details


01-16-2015	0.60	Sdded rear ribs halves	Details


01-16-2015	1.00	Riveted Panel to CT-055	Details


01-16-2015	1.00	Flap motor channel	Details


01-16-2015	2.50	Added my own stiffener	Details


01-15-2015	3.50	Parts CT-060, 059 and 056	Details


01-15-2015	1.00	Doublers to ribs	Details


01-07-2015	1.00	Rivet rib to front spar	Details


01-07-2015	2.00	Ribs riveted to front spar	Details


01-07-2015	0.30	Part CT-052 installed	Details


01-07-2015	0.30	Install CT-053,074	Details


01-07-2015	0.20	ELT bracket	Details


01-07-2015	0.70	Attach rib to front spar	Details


01-07-2015	0.40	Assembled Aileron pully brackets	Details


01-07-2015	0.40	Angle to outer ribs	Details


01-07-2015	0.70	Angle brackets to ribs	Details


01-06-2015	0.60	Added Ct-002 brackets to front spars	Details


01-05-2015	1.00	Spar cary through	Details


01-05-2015	4.00	Prime parts	Details


01-01-2015	7.50	Scuff alclad on parts	Details


12-24-2014	3.00	Scuff alcad on parts	Details


12-11-2014	1.00	Stiffeners	Details


12-11-2014	1.50	rear ribs	Details


12-11-2014	2.00	More brackets	Details


12-11-2014	0.80	Install stiffeners	Details


12-11-2014	0.40	ELT bracket	Details


12-11-2014	2.00	Driiled out brackets	Details


12-11-2014	0.40	Attach Airleron bellcrank	Details


12-10-2014	1.50	Rivet Spar Carry through	Details


12-10-2014	2.00	attached angles to ribs	Details


12-10-2014	0.80	Aileron pully brackets	Details


12-06-2014	5.50	acid was and primer	Details


12-02-2014	4.00	sand and acid wash parts	Details


12-01-2014	2.80	Took apart deburred carry through spar	Details


05-22-2014	3.00	Drilled out holes in spar carry through	Details

	SITE NAVIGATION

Contact Builder

AirCam Home

Category		# Logs	# Hours

All		284	547

Ailerons		10	16

Center wing		91	229

Elevator trim tab.		6	3

Elevators		22	36

Flaps		6	12

Fuel Tanks		20	43

Fuselage		2	3

Horizontal Stabilize		38	63

Paint booth		1	8

Rudder		19	30

Tools		1	0

Vertical Stab		46	71

Wings		22	33