Brief Description: Close aileron & install reinforcements
1. Positioned parts 62W2-5 and 65W2-6 in aileron, using masking tape. 2. Clecoed aileron closed. 3. Back drilled 62W2-5 and -6 with #30 bit. 4. Removed aileron, 65W2-5 and 65W2-6. 6. Deburred parts, degreased with MEK, and primed with zinc chromate primer. 7. Clecoed parts in place, and aileron closed. 8. Riveted with A4 rivets.