I made two lengths of red 20 ga wire about 8'' long and crimped Molex pins on each end. These wires were inserted into the P-1-0 connector. These wires are the power wires for the landing and taxi lights from the P-1 connector.
I screwed up by inserting the pins into the wrong side of the connector. The pins were pulled out and reinserted in the correct side. One wire broke off the pin. I ordered more pins from Jason-Aerotronics. I don't have any more pins to continue with this part.
Power wires for the landing and taxi lights
The plugs inserted into the wrong end of the P-1-0 connector
Three of the wires plugged into the corect side of the P-1-0 connector