KitLog pro

Powered By Kitlog Pro v2.0

Brians Web Site
Work Logs Found: 250
Category Work Time: 1071 Hours
 Date
Hours
Work Log Summary

Details

 01-23-2021
0.60
First Flight!
Details
       

 01-20-2021
1.00
Labels
Details
     

 01-09-2021
1.50
Airworthiness inspection
Details
     

 01-08-2021
2.00
Moved plane to heated hangar.
Details
       

 01-06-2021
7.00
Inspection Prep
Details
       

 01-03-2021
2.50
Reattach fuel tank
Details
       

 01-02-2021
2.00
Fixed fuel tank leak.
Details
       

 01-01-2021
2.00
Pulled left tank
Details
       

 12-27-2020
2.00
Fuel leak
Details

 12-26-2020
3.00
Wing root fairings
Details

 12-24-2020
1.50
Wing root fairings
Details

 12-20-2020
4.50
First start.
Details
       

 12-19-2020
1.50
Engine oil
Details

 12-16-2020
1.00
Fuel lines
Details

 12-15-2020
1.00
Installed engraved gas caps.
Details
     

 12-13-2020
2.00
Aileron adjust
Details

 12-12-2020
3.50
New front spinner plate
Details

 12-11-2020
2.00
Flaps
Details
     

 12-05-2020
3.50
Tail fairing
Details
     

 12-02-2020
4.00
Avionics calibration
Details

 11-29-2020
3.00
Light Attach
Details
     

 11-28-2020
4.00
Wing Attach
Details
       

 11-27-2020
4.00
Prepare for wing attach.
Details

 11-25-2020
5.00
Attach control surfaces.
Details
       

 11-18-2020
0.00
Transition training
Details
       

 11-14-2020
4.00
Moved wings to hangar.
Details
       

 11-13-2020
3.00
Moving day!
Details
       

 11-08-2020
4.00
Put on fiberglass parts
Details
       

 11-07-2020
4.00
SB-00027
Details
     

 11-04-2020
2.00
Primer
Details
     

 11-01-2020
2.00
Programing avionics
Details
     

 10-25-2020
5.00
Rear window.
Details
       

 10-24-2020
6.00
Updated G3x software, put on cowl to check fit.
Details
     

 10-23-2020
5.00
Put on canopy
Details
       

 10-23-2020
4.00
Continued work on cowl.
Details
       

 10-21-2020
4.00
Seat belts
Details
     

 10-15-2020
3.00
Cowl work
Details
       

 09-27-2020
3.00
Relocated remote radio
Details
     

 09-27-2020
2.00
Empenage fairing.
Details
       

 09-26-2020
2.00
Sanding wheel pants.
Details
     

 09-26-2020
3.00
ELT
Details
       

 09-25-2020
5.00
Added flox to wheel pants at junction fairings.
Details
       

 09-21-2020
2.00
Sanded lower cowl to match baffles.
Details
       

 09-20-2020
6.00
Started on junction fairings for the main gear.
Details
       

 09-19-2020
6.00
Finished main gear fairings
Details
     

 09-15-2020
1.50
Tech advisor inspection.
Details
     

 09-12-2020
6.00
Main gear fairing
Details
       

 09-11-2020
4.00
Nose gear fairing
Details
     

 09-05-2020
6.00
Nose gear pants
Details
       

 09-02-2020
4.00
Nose gear pants
Details
     

 08-30-2020
5.00
Started nosewheel pants
Details
       

 08-29-2020
6.00
Fitting main gear wheel pants.
Details
       

 08-24-2020
2.00
Marked lower cowl
Details
       

 08-23-2020
4.00
Heat SCAT tubing and EGT/CHT
Details
       

 08-22-2020
4.00
Heat system
Details
       

 08-21-2020
3.00
Heat muffs
Details
     

 08-19-2020
5.00
Exhaust
Details
       

 08-16-2020
5.00
Oil cooler
Details
       

 08-15-2020
6.00
Baffles continued
Details
       

 08-14-2020
5.00
More engine
Details
       

 08-09-2020
5.00
Baffles, started engine cooler and snorkel
Details
       

 08-08-2020
5.00
Baffles
Details
       

 08-07-2020
2.00
Baffles
Details
     

 08-02-2020
5.00
More cowling
Details
       

 08-01-2020
5.00
Riveted cowl hinges
Details
     

 07-26-2020
6.00
Lower cowl
Details
       

 07-25-2020
8.00
Upper cowl
Details
       

 07-22-2020
5.00
Cowling continued
Details
     

 07-19-2020
3.00
Start Cowl
Details
       

 07-18-2020
3.00
Gap fillers for spinner.
Details
     

 07-12-2020
4.00
Spinner mounting
Details
       

 07-11-2020
6.00
Safety wire
Details
       

 07-10-2020
6.00
Propeller mounted.
Details
       

 07-09-2020
2.00
Throttle and spinner start
Details
       

 07-05-2020
5.00
Engine systems hookup
Details
       

 07-04-2020
8.00
Continued engine systems hookup
Details
       

 07-01-2020
3.00
More engine systems.
Details
       

 06-28-2020
7.00
Engine systems
Details
       

 06-27-2020
9.00
Engine mounted
Details
       

 06-26-2020
8.00
Preheater, Electrical
Details
       

 06-23-2020
1.50
Tech inspection.
Details
     

 06-21-2020
7.00
More engine prep
Details
       

 06-20-2020
8.00
Side panels
Details
     

 06-16-2020
4.00
Heated seats
Details
     

 06-14-2020
8.00
Wiring, brakes
Details
       

 06-13-2020
8.00
Engine prep
Details
       

 06-12-2020
3.00
Engine arrived!
Details
       

 06-11-2020
4.00
Axle shims
Details
       

 06-07-2020
6.00
Interior and more electrical problems
Details
       

 06-06-2020
5.00
Interior
Details
       

 05-25-2020
4.00
Electrical problems continued
Details
     

 05-23-2020
8.00
Yaw damper, electrical problems
Details
       

 05-22-2020
4.00
Put on the empenage, antennas, left step
Details
       

 05-22-2020
6.00
On the gear
Details
       

 05-21-2020
2.50
Right main landing gear
Details
       

 05-18-2020
1.00
Canopy release
Details
       

 05-17-2020
5.00
Engine controls
Details
       

 05-16-2020
5.00
Avionics
Details
       

 05-10-2020
7.00
Avionics install
Details
       

 05-09-2020
10.00
Avionics install
Details
       

 05-08-2020
10.00
Avionics install
Details
       

 05-07-2020
5.00
Install Avionics
Details
       

 05-06-2020
3.00
Shelf for GTX 45R
Details
     

 05-06-2020
4.00
Avionics arrived!
Details
       

 05-05-2020
3.00
Miscellaneous finishing kit
Details
       

 05-03-2020
4.00
Engine mount
Details
       

 05-02-2020
5.00
Canopy finished
Details
       

 05-01-2020
2.00
Canopy fairing 9
Details
       

 04-30-2020
2.00
Canopy fairing 8
Details
     

 04-29-2020
3.00
Canopy fairing 7
Details
       

 04-27-2020
2.00
Canopy fairing 6
Details
     

 04-26-2020
2.00
Canopy fairing 5
Details
       

 04-25-2020
3.00
Landing gear start.
Details
       

 04-25-2020
2.00
Canopy fairing 4
Details
       

 04-24-2020
3.00
Canopy fairing 3
Details
       

 04-22-2020
1.00
Canopy fairing 2
Details
     

 04-21-2020
4.00
Canopy fairing
Details
       

 04-19-2020
4.00
Filler layer at bottom of canopy.
Details
       

 04-18-2020
5.00
Rivet canopy side skins
Details
       

 04-15-2020
2.00
Paint glareshield
Details
       

 04-13-2020
2.00
Canopy countersinks
Details
     

 04-11-2020
5.00
Canopy drilled
Details
       

 04-11-2020
4.00
Began canopy attach process
Details
       

 04-10-2020
4.00
Canopy frame painted.
Details
     

 04-09-2020
1.00
Canopy frame fits!
Details
     

 04-08-2020
12.00
Canopy frame completed
Details
       

 04-07-2020
10.00
Canopy continued...
Details
       

 04-06-2020
5.00
Started the canopy
Details
       

 04-05-2020
3.00
Nutplates for empenage fairing
Details
       

 04-04-2020
6.00
Fitting empenage fairing
Details
     

 04-04-2020
6.00
Drilled the canopy
Details
       

 03-28-2020
7.00
Rear window
Details
       

 03-15-2020
4.00
Wing tip fairings
Details
       

 03-14-2020
2.00
Glued in the vents and static ports.
Details
       

 03-13-2020
5.00
Assembled the canopy latch.
Details
       

 03-11-2020
3.00
Assembled the air vents.
Details
       

 03-07-2020
3.00
Painted cockpit access covers.
Details
       

 02-29-2020
6.00
Canopy rear frame assembly
Details
       

 02-28-2020
6.00
Got canopy parts ready for assembly
Details
     

 02-22-2020
7.00
Finish and Firewall foreward inventory.
Details
       

 02-20-2020
3.00
Finish Kit arrived.
Details
       

 02-07-2020
0.00
Paint design finalized
Details
     

 02-04-2020
0.00
Panel design!
Details
     

 02-03-2020
3.00
Antenna cable runs
Details
       

 02-01-2020
1.00
Mounted VOR/ILS antenna
Details
       

 01-30-2020
2.00
GPS antena mounting plate
Details
       

 01-29-2020
4.00
GPS antenna mounting
Details
       

 01-18-2020
6.00
Rudder pedals
Details
       

 01-17-2020
3.00
Rudder pedals
Details
       

 01-12-2020
4.00
Gap covers
Details
       

 12-28-2019
6.00
Wingtips
Details
     

 12-24-2019
8.00
Wingtips
Details
     

 12-23-2019
3.00
Alignment of wing tips and aileron.
Details
       

 12-22-2019
4.00
Wing tips
Details
       

 12-21-2019
9.00
Installed the aileron trim motor and springs.
Details
       

 12-14-2019
4.00
Pitot and AOA lines
Details
       

 12-07-2019
7.00
More wiring
Details
       

 12-01-2019
7.00
Fuselage wiring harness
Details
       

 11-29-2019
8.00
Control sticks.
Details
       

 11-24-2019
3.00
Flap motor
Details
       

 11-23-2019
2.00
Second coat of paint for the interior
Details
       

 11-23-2019
8.00
Riveted in the roll over assembly
Details
       

 11-23-2019
2.00
Painted roll over assembly
Details
     

 11-20-2019
6.00
Completed roll-over assembly
Details

 11-16-2019
4.00
Painted the interior
Details
       

 11-02-2019
5.00
Baggage floors
Details
       

 11-01-2019
2.00
Flap bearing blocks
Details
       

 10-30-2019
2.00
Fuel lines
Details
       

 10-27-2019
3.50
Finished fusealge join.
Details
       

 10-26-2019
4.25
Rivet fuselage joint
Details
       

 10-25-2019
10.00
RIght wing skin
Details
     

 10-25-2019
1.50
Fuselage join!
Details
       

 10-25-2019
2.00
Aileron torque tubes
Details
       

 10-20-2019
10.00
Left wing skin
Details
     

 10-18-2019
3.00
Leak Test
Details
       

 10-18-2019
6.00
Landing lights
Details
       

 10-15-2019
2.00
Tech counsellor visit
Details
     

 10-13-2019
6.00
Fuel senders and landing lights
Details
       

 10-12-2019
5.00
Mounted Pitot AOA
Details
       

 10-05-2019
5.00
Drill J-channel and cut out for pitot mast.
Details
       

 09-29-2019
6.00
Removed fuel tanks
Details
       

 09-28-2019
8.00
Continued installing systems
Details
       

 09-27-2019
5.00
Started wing systems
Details
       

 09-21-2019
9.00
Finished fiberglass work
Details
       

 09-11-2019
16.00
Paint training
Details
       

 09-04-2019
2.00
Started the HS fiberglass
Details
     

 09-03-2019
3.00
Finished elevator tips
Details
       

 09-02-2019
3.00
More Fiberglass
Details
       

 08-30-2019
0.00
Control sticks
Details
       

 08-25-2019
5.00
Prepared fuselage floors
Details
       

 08-25-2019
3.00
Fiberglass work
Details
       

 08-24-2019
8.00
Fuel system, Baggage bulkhead
Details
       

 08-23-2019
4.00
Modifying QB fuse for tricyle gear
Details
       

 08-21-2019
2.00
Various cuts and drills.
Details
       

 08-19-2019
8.00
Checking quick build fuselage.
Details
     

 08-17-2019
3.00
Aileron belcrank fabrication
Details
       

 08-13-2019
3.00
Elevator pushrods
Details
     

 08-08-2019
4.00
Autopilot servos
Details
     

 08-04-2019
6.00
Flap/aileron gap seals
Details
       

 08-03-2019
3.00
Various wing parts
Details
     

 07-28-2019
8.00
Received and inventoried the quickbuild wing and f
Details
       

 06-30-2019
3.00
Mounted control surfaces
Details
       

 06-28-2019
2.00
Mounted HS and VS
Details
       

 06-28-2019
2.00
Mounted elevator
Details
       

 06-23-2019
4.00
Right top skin and center top skin
Details
       

 06-21-2019
3.00
Left side top skin
Details
     

 06-15-2019
4.00
Upper side skins
Details
     

 06-14-2019
5.00
Rear deck
Details
       

 06-09-2019
5.00
Wiring
Details
       

 06-08-2019
7.00
Finished riveting tailcone side skins
Details
       

 05-26-2019
6.00
Started riveting.
Details
       

 05-25-2019
6.00
Tailcone assembly
Details
       

 05-24-2019
4.00
Rivet underside, start dimple sides
Details
       

 05-16-2019
1.00
Visit from EAA Tech Counselor
Details
 

 05-12-2019
4.00
Started tailcone assembly
Details
 

 05-11-2019
10.00
Started on tailcone.
Details
       

 05-11-2019
1.00
Stand for empenage control surfaces.
Details
       

 05-10-2019
2.00
Elevator Counterweights
Details
     

 05-06-2019
1.00
Elevator leading edges
Details
       

 05-04-2019
4.50
Finished trailing edge and trim servo mounting
Details
       

 04-20-2019
4.00
Continue riveting
Details
       

 04-14-2019
6.00
Continued assembly
Details
       

 04-13-2019
7.00
Begin Assembly
Details
       

 04-12-2019
6.00
Scuff, prime and start assembly
Details
       

 03-31-2019
4.00
Dimple and countersink
Details
       

 03-30-2019
3.00
Begin disassembly and dimple
Details
       

 03-26-2019
1.50
Trailing edge
Details
       

 03-23-2019
5.00
Started elevator
Details
       

 03-22-2019
1.50
Rudder done
Details
       

 03-17-2019
6.50
Finished
Details
       

 03-16-2019
7.00
Riveting
Details
       

 03-12-2019
3.00
Riveting
Details
       

 03-09-2019
9.00
Deburr, prime
Details
       

 03-08-2019
2.50
Rivet rear spar HS
       

 03-08-2019
2.00
Rivet Front HS Spar
Details
       

 03-07-2019
2.00
Final drill and prime HS spar parts
Details

 03-06-2019
3.00
Started
Details
     

 03-03-2019
6.00
Rudder done
Details
       

 03-02-2019
8.50
Finished VS, more rudder
Details
       

 03-01-2019
2.50
Dimpled and riveted
Details
       

 02-24-2019
5.00
More work on rudder.
Details
       

 02-23-2019
3.25
Rudder assemby
Details
       

 02-23-2019
3.00
Began Rudder substructure
Details
       

 02-22-2019
6.00
Primed and riveted substructure of VS
Details
       

 02-22-2019
3.00
Finish VS substructure, Start rudder
     

 02-21-2019
1.50
Assembly of VS substructure, First Rivets.
Details
       

 02-19-2019
1.50
Debur parts for VS
Details
       

 02-17-2019
4.00
Debur parts
Details
       

 02-16-2019
5.00
Part Inventory
Details
       

 02-08-2019
3.50
Build worktable
       










Copyright © 2001-2021 Matronics. All Rights Reserved.