KitLog pro

Powered By Kitlog Pro v2.0

Bob's RV-8 Build Site
Work Logs Found: 1730
Category Work Time: 4253 Hours
 Date
Hours
Work Log Summary

Details

 07-11-2024
2.70
Battery Hold Down Ver 2.0
Details
       

 07-08-2024
2.40
Battery Hold Downs
Details
       

 07-06-2024
6.70
Aileron Bracket, Pitch Servo, Trim Tab
Details
       

 07-05-2024
0.00
Wiring, Wint Tips, Propeller #2
Details
       

 07-05-2024
7.50
Wiring, Wint Tips, Propeller #1
Details
       

 07-04-2024
6.30
Right Aileron Bracket & Cockpit Work
Details
       

 07-03-2024
1.90
Wiring and Fuel Selector
Details
       

 07-02-2024
7.40
Lighting, Trim Tab, Pitot Tube
Details
       

 07-01-2024
5.70
Wingtips, Electrical, Vents
Details
       

 06-29-2024
6.70
Wing Tip Wires, Lenses, Priming Fairings
Details
       

 06-28-2024
2.40
Wing Tip Lights and Rudder
Details
       

 06-26-2024
1.50
Vert Stab Fairing Work
Details
       

 06-25-2024
0.80
Eko-Poxy Canopy Repair
Details
     

 06-15-2024
2.40
Sika Canopy
Details
       

 06-14-2024
1.10
Repair Cracked Corner of Canopy
Details
       

 06-01-2024
5.60
Tailwheel Attach & Misc
Details
       

 05-31-2024
2.50
Rudder Installed and Left Fuel Tank Bracket
Details
       

 05-30-2024
0.90
Mask and Paint Canopy Skirt
Details
     

 05-29-2024
1.10
Sand Micro on Canopy
Details
     

 05-27-2024
4.80
Wing Gap Fairings and Fuel Tank Wing Brackets
Details
       

 05-26-2024
0.00
Visitors
Details
     

 04-28-2024
5.40
Sand and Prime Fiberglass Parts
Details
       

 04-27-2024
3.50
Canopy Skirt
Details
       

 04-26-2024
3.10
Sand Canopy Skirt and More Filler
Details
       

 04-25-2024
2.80
Wingtips and Rudder Work
Details
       

 04-24-2024
2.90
Smooth Prime and Sand Parts
Details
       

 04-23-2024
1.40
Second Coat of Smooth Prime
Details
       

 04-22-2024
2.70
Finish Prep and Paint First Coat of Smooth Prime
Details
     

 04-21-2024
2.50
Canopy, Rudder, Wingtips sanding completed
Details
       

 04-20-2024
7.60
Complete Install/Rig Flaps - Install Magnetometer
Details
       

 04-19-2024
4.80
Wingtips and Rudder
Details
       

 04-17-2024
2.10
Sand Wingtips and Fiberglass Rivet Lines
Details
       

 04-16-2024
3.60
Cowlings, Wing Tips, and Fairings
Details
       

 04-14-2024
0.00
Flaps, Ailerons, and Electrical #2
Details
       

 04-14-2024
6.20
Flaps, Ailerons, and Electrical #1
Details
       

 04-13-2024
7.60
Flaps and Elevators
Details
       

 04-06-2024
0.00
Wing Bolts, Ailerons, and Wiring #2
Details
       

 04-06-2024
8.20
Wing Bolts, Ailerons, and Wiring #1
Details
       

 04-05-2024
2.70
Make Aileron Jigs and Spacers
Details
       

 04-04-2024
2.90
Work Cowls
Details
       

 04-03-2024
1.40
Sanding on Cowls
Details

 04-01-2024
1.60
Sand Top Cowl and Apply Filler to Parts
Details
       

 03-30-2024
5.30
Prime Fiberglass Parts
Details
       

 03-25-2024
2.60
Sand Upper Cowl and All Landing Gear Fairings
Details
       

 03-23-2024
11.50
Wing Set and Attach
Details
       

 03-16-2024
0.00
BIG MOVE TO HANGAR #3
Details
       

 03-16-2024
0.00
BIG MOVE TO HANGAR #2
Details
       

 03-16-2024
0.00
BIG MOVE TO HANGAR #1
Details
       

 03-15-2024
0.00
Pre-move things to Hangar
Details
       

 03-14-2024
1.20
Work on Wing Attach Bolt Holes
Details

 03-13-2024
1.40
Upper Cowl Work
Details
       

 03-08-2024
2.20
Sand and Prime Fairings
Details
     

 03-05-2024
2.40
Sand Primer and More Filler
Details
     

 03-04-2024
4.20
Sanding and Priming
Details
       

 03-03-2024
2.90
Moooooore Sanding......
Details
       

 03-02-2024
4.40
Lots of Sanding Fairings
Details
       

 02-29-2024
1.60
Sanding Fiberglass Parts
Details
       

 02-27-2024
1.40
Smooth Prime & Fuel Vents
Details
       

 02-25-2024
2.10
More Smooth Prime Work
Details
       

 02-24-2024
5.20
Wheel Pants and Gear Fairings Nutplates & Priming
Details
       

 02-23-2024
2.40
VS Fairing, Oil Door, and Misc
Details
       

 02-21-2024
1.80
Vertical Stab Fairing and Oil Door
Details
       

 02-20-2024
1.60
Work Right Wheel Pant and Oil Door
Details
       

 02-19-2024
1.20
Tidy Up Shop and Label Panel
Details
     

 02-18-2024
2.40
Finish Fuel Tank Brackets
Details
       

 02-17-2024
5.40
Skybolts and Misc Items
Details
       

 02-16-2024
2.50
Install some Avionics and Misc Items
Details
       

 02-15-2024
2.40
Fuel Tank Brackets
Details
       

 02-14-2024
0.80
Oil Door
Details
     

 02-12-2024
1.20
Fuel Tank Brackets
Details
       

 02-11-2024
1.10
Fiberglass and Tank Brackets
Details
       

 02-10-2024
2.10
Wheel Fairing and Upper Cowl Fiberglass
Details
       

 02-09-2024
4.60
More Avionics, Electrical Work, and Fiberglass
Details
       

 02-08-2024
6.20
Instrument Panel Work
Details
       

 02-07-2024
5.50
Working on Electrical and Cowling
Details
       

 02-06-2024
2.20
Sand Fiberglass
Details
       

 02-04-2024
0.00
Florida for Aunt Tonie
Details
       

 01-27-2024
1.00
Move Wings to Hangar
Details
       

 01-26-2024
0.90
Right Wheel Pant
Details
     

 01-25-2024
3.10
Wheel Pants & Landing Gear Fairings
Details
       

 01-24-2024
0.80
SuperFil Flaws on Landing Gear Fairings
Details
     

 01-23-2024
2.60
Sand Micro on Landing Gear Fairings
Details
       

 01-22-2024
1.80
Micro Landing Gear Fairings and Empennage Fairing
Details
       

 01-21-2024
2.40
Emp Fairing, Lower Cowl, Landing Gear Fairings
Details
       

 01-20-2024
1.50
Landing Gear Upper Fairings......more work
Details
     

 01-19-2024
2.10
More Work on Upper Gear Fairings
Details
       

 01-18-2024
2.20
Upper Landing Gear Fairings
Details
       

 01-17-2024
1.60
Wheel Pant Flox Removal
Details
     

 01-16-2024
2.60
Flox Wheel Pants
Details
     

 01-15-2024
0.00
Lower Landing Gear Fairings and Wrap Sill Part 2
Details
       

 01-15-2024
5.60
Lower Landing Gear Fairings and Wrap Sill Part 1
Details
       

 01-14-2024
0.00
Landing Gear Fairings and Misc Part 2
Details
       

 01-14-2024
5.70
Landing Gear Fairings and Misc Part 1
Details
       

 01-13-2024
3.90
Canopy Rails, Oil Door, & Cowling
Details
       

 01-12-2024
1.00
Remove Left Canopy Rail
Details
     

 01-11-2024
1.20
Mark Fuselage and Wing Bolt Holes
Details
     

 01-09-2024
1.30
Wing Template and Paint Removal
Details
       

 01-08-2024
0.80
Make Inboard Wing Pattern
Details
       

 01-07-2024
0.90
Putting in Single-lug Nutplates to finish Wing Fai
Details
       

 01-06-2024
7.40
Prep Left & Right Inboard Wing Fairings
Details
       

 01-04-2024
3.90
Sand Cowl & Oil Door
Details
       

 01-03-2024
2.40
Modify and Fiberglass Lower Cowl
Details
       

 01-02-2024
2.70
Right Pmag Blast Tube & Cowl Pins
Details
       

 01-01-2024
1.20
Pmag Blast Tubes
Details
     

 12-31-2023
1.20
Pmag Blast Tube and Cowl Pin Covers
Details
       

 12-30-2023
0.00
Firewall Forward Items #2 (Cont)
Details
       

 12-30-2023
4.80
Firewall Forward Items #2
Details
       

 12-29-2023
0.00
Firewall Forward Items #1 - (cont)
Details
       

 12-29-2023
6.10
Firewall Forward Items #1
Details
       

 12-28-2023
0.00
Mixture Cable
Details
       

 12-28-2023
2.70
Cowl fitting, Baffle Seals, and Mixture Cable
Details
       

 12-23-2023
1.10
Oil Door
Details
     

 12-09-2023
2.40
Empennage Fairing and Oil Door
Details
       

 12-07-2023
3.50
Cowl Hinge Covers & Empennage Fairing
Details
       

 12-06-2023
2.30
Empennage Fairing and Roll Bar Chafe Strips
Details
       

 12-05-2023
3.20
Misc Items worked
Details
       

 12-04-2023
1.10
Completed Regulator Wirig
Details
     

 12-03-2023
0.90
Regulators
Details
     

 12-02-2023
4.10
Hardware Organization & Misc
Details
       

 12-02-2023
4.10
Exhaust Hanger and Tap Longeron holes
Details
       

 11-26-2023
1.20
Cowl Pin Covers and Regulators
Details
       

 11-25-2023
3.10
Empennage Fairing and Misc
Details
       

 11-20-2023
1.80
Empennage Fairing
Details
       

 11-19-2023
4.30
Empennage Fairing and Cowl Hinge Covers
Details
       

 11-18-2023
3.00
Snorkel and Alt Air Cable Installed
Details
       

 11-18-2023
2.70
Landing Gear Wheel Fairings and Lower Cowl
Details
       

 11-17-2023
3.40
Fuselage and Control Work - Part Deux
Details
       

 11-17-2023
3.40
Cowls, Landing Gear Wheel Fairings and Oil Door
Details
       

 11-16-2023
6.10
Lower & Upper Cowl and Wheel Fairings
Details
       

 11-15-2023
4.70
Electrical and Fiberglass
Details
       

 11-14-2023
1.50
Lower Cowl Sanding
Details
     

 11-13-2023
4.90
Paint Snorkel, Sand Lower Cowl and Oil Door
Details
       

 11-12-2023
0.00
Control Column and Pushrods
Details
       

 11-12-2023
5.10
Ahhhh......More Sanding......
Details
       

 11-11-2023
2.90
Sand Top Cowl and Snorkel
Details
       

 11-09-2023
2.60
Smooth Prime Cowl and Oil Door
Details
       

 11-08-2023
2.50
Cowl Work and Empennage Fairing
Details
       

 11-07-2023
4.80
Cowling, Oil Door, Empennage Fairing
Details
       

 11-06-2023
1.10
Lower Cowl, Emp Fairing, VS Fairing
Details
       

 10-29-2023
0.80
Coat #3 of Smooth Prime
Details
     

 10-28-2023
3.20
Empennage Work on Fairing & Misc.
Details
       

 10-27-2023
3.90
Bottom Cowl and Empennage Fairing
Details
       

 10-26-2023
0.70
Rough Sanded Cap on Vertical Stab
Details
     

 10-25-2023
1.70
Empennage Fairing #5
Details
       

 10-24-2023
1.60
Modified Baggage Door
Details
       

 10-23-2023
1.40
Empennage Fairing Work #4
Details
       

 10-22-2023
4.40
Empennage Fairing #3 Ver 2.0
Details
       

 10-21-2023
5.60
Flooring and Misc items
Details
       

 10-20-2023
4.70
Empennage Fairing #2 & Baggage Door
Details
       

 10-19-2023
2.20
Rework Vertical Stab Cap
Details
       

 10-18-2023
0.90
Fiberglass Vert Stab Cap
Details
     

 10-17-2023
1.00
Vertical Stab Cap
Details
     

 10-16-2023
1.60
Empennage Fairing #1
Details
       

 10-15-2023
5.70
Empennage Components
Details
       

 10-14-2023
4.00
Working the Baggage Door
Details
       

 10-14-2023
4.70
Getting the Empennage Attached
Details
       

 10-13-2023
3.60
Sand Lower Cowl and Clean Fairings
Details
       

 10-12-2023
1.80
Work FWD Baggage Door
Details
       

 10-09-2023
0.80
Paint Tail Wheel Weldment
Details
     

 10-08-2023
1.40
Remove Tailwheel and Prep for Primer
Details
       

 09-09-2023
3.50
Install Lower Baffle Tensioners
Details
       

 09-09-2023
1.00
Complete SuperFil on Lower Cowl
Details
     

 09-08-2023
4.80
EGT/CHT Wires & Lower Baffle Tensioners
Details
       

 09-07-2023
1.90
SuperFil on Lower Cowl
Details
       

 09-06-2023
0.80
Intersection Fairings
Details
       

 09-05-2023
1.20
Ignition Wire Pass-thru's
Details
       

 09-04-2023
0.00
Baffles - Snorkel - Priming #2
Details
       

 09-04-2023
9.80
Baffles - Snorkel - Priming #1
Details
       

 09-03-2023
3.60
CHT-EGT Probes & Misc Items
Details
       

 09-02-2023
0.00
Sand Fiberglass Parts Part #2
Details
       

 09-02-2023
5.80
Sand Fiberglass Parts Part #1
Details
       

 09-01-2023
3.80
Snorkel and Baffeling
Details
       

 08-31-2023
0.70
Snorkel Brackets
Details
     

 08-30-2023
2.50
Install Crankshaft Seal Retainer Brackets & Snorke
Details
       

 08-29-2023
1.40
Snorkel Bolts and Brackets
Details
     

 08-28-2023
1.70
Baffle and Snorkel
Details
     

 08-27-2023
2.20
Left Front Baffle and Alt Air Bracket
Details
       

 08-18-2023
2.80
Engine Misc Items
Details
       

 08-17-2023
1.10
Bond Alt Air Flange & Secure Cables
Details
       

 08-16-2023
1.40
Torque Stby Alternator & Alt Air Flange
Details
       

 08-14-2023
1.90
Install Standby Alternator
Details
       

 08-13-2023
2.10
Oil line restrictor and Alternator
Details
       

 08-05-2023
0.00
Novak's Aircraft Factory
Details
       

 08-02-2023
1.20
Alternate Air Bypass
Details
     

 08-01-2023
1.40
Install Snorkel to fit Alt Air Door
Details
     

 07-31-2023
2.20
Sensor Manifold Standoff and Restrictor
Details
       

 07-30-2023
0.00
Engine Cables and Hoses
Details
       

 07-30-2023
4.80
Cowl Prep and Electrical
Details
       

 07-29-2023
2.20
AOA Module-Wire Standoff-Tach Cover
Details
       

 07-23-2023
2.20
Assemble Left Console
Details
       

 07-22-2023
4.70
Left Console and Clean up
Details
       

 07-21-2023
2.40
Throttle Quad Friction Knob
Details
       

 07-20-2023
1.00
Left Console Panel
Details
     

 07-17-2023
1.10
Left Console
Details
       

 07-16-2023
0.00
2-Throttle Quad
Details
     

 07-16-2023
5.90
1-Throttle Quad
Details
       

 07-15-2023
0.00
Florida Trip
Details
       

 07-02-2023
7.60
Throttle Quadrant and Aileron Trim
Details
       

 07-01-2023
2.10
Aileron Trim & Throttle Quadrant
Details
       

 06-30-2023
2.40
Aileron Trim......close to done.
Details
       

 06-29-2023
1.60
Left Console & Trim Cable
Details
     

 06-28-2023
1.70
Aileron Trim
Details
       

 06-27-2023
1.10
Aileron Trim Cable
Details
       

 06-26-2023
1.50
Aileron Trim
Details
       

 06-20-2023
1.90
Tail Section Work
Details
       

 06-19-2023
1.00
Start the Aileron Trim
Details
       

 06-19-2023
2.20
Cowling Sanding
Details
       

 06-16-2023
3.60
Complete Front/ Rear Throttle Connections
Details
       

 06-15-2023
1.90
Rear Throttle
Details
       

 06-14-2023
1.60
Rear Throttle
Details
       

 06-13-2023
1.90
Sand Cowl & Rear Throttle
Details
       

 06-12-2023
2.70
Front/Rear Throttle Linkage
Details
       

 06-11-2023
1.30
Rear Throttle Quadrant
Details
       

 05-30-2023
1.10
Working Front and Rear Throttle Quadrants
Details
       

 05-29-2023
3.20
Sand Landing Gear Fairings and Upper Cowl
Details
       

 05-27-2023
1.30
Throttle Quadrant
Details
     

 05-27-2023
3.50
Prep and Prime Fiberglass Parts
Details
       

 05-26-2023
1.00
Sand Micro and Glaze
Details
     

 05-25-2023
2.10
Sand, Cowl Landing Gear Fairings & Clean up
Details
       

 05-24-2023
1.20
Throttle-Mixture-Prop Cables
Details
       

 05-23-2023
1.00
Throttle / Mixture Cables and Cable Bracket
Details
       

 05-22-2023
1.40
Mixture and Throttle Cables
Details
     

 05-21-2023
2.70
Mixture Cable and Bracket
Details
       

 05-20-2023
2.40
Sand and work fiberglass
Details
       

 05-20-2023
5.00
Misc Engine Work
Details
       

 05-19-2023
2.90
Sand and glas cowling
Details
       

 05-18-2023
2.10
Upper Cowling and Inlet Ramps
Details
     

 05-17-2023
1.80
Landing Gear Fairings and upper Cowling
Details
       

 05-16-2023
3.40
Landing Gear Fairings and Top Cowl
Details
       

 05-15-2023
2.70
Windscreen Fairing, Cowl Ducts, Gear Leg Fairings
Details
       

 05-14-2023
3.30
Oil Cooler, Windscreen Fairing, and Top Cowling
Details
       

 05-11-2023
1.10
Windscreen sand -prime-fill
Details
       

 05-10-2023
2.90
Fiberglass Cowling Ducts & Windscreen
Details
       

 05-09-2023
1.30
Connect Oil Lines
Details
       

 05-09-2023
2.10
Canopy Sand and Fill
Details
       

 05-08-2023
2.80
Lower Landing Gear and Windscreen Fairing
Details
       

 05-07-2023
1.40
Tape Windscreen, Install Hose, Remove Fairings
Details
       

 05-05-2023
0.00
Mission HATZ to KFDK
Details
       

 05-05-2023
3.80
Landing Gear Upper Fairings
Details
       

 05-04-2023
9.30
Windscreen, Brake Lines, and Upper Gear Fairings
Details
       

 05-03-2023
0.00
Release for the Canopy
Details
       

 05-03-2023
6.80
Canopy Sand & Micro
Details
       

 05-02-2023
8.30
Canopy/Windscreen Fairings
Details
       

 05-01-2023
7.50
Canopy
Details
       

 04-30-2023
8.30
Taping, Tracing, and Throttle Bracket Making!
Details
       

 04-29-2023
3.50
Firewall Forward Tasks
Details
       

 04-29-2023
4.00
Canopy work
Details
       

 04-28-2023
1.00
Fuel Caps
Details
       

 04-28-2023
3.00
Firewall Pass Thrus & Cables
Details
       

 04-28-2023
5.00
Canopy Fiberglass Work
Details
       

 04-26-2023
5.30
Install Axle Shims / Finish Wheel Pants
Details
       

 04-24-2023
2.10
Snorkel and Brackets
Details
       

 04-22-2023
4.90
Gear Leg Fairings
Details
       

 04-21-2023
2.60
Windscreen Sika - Continued
Details
       

 04-21-2023
3.00
Sika Windscreen Prep
Details
       

 04-20-2023
4.20
Taping Windscreen for Sika
Details
       

 04-19-2023
1.10
Snorkel Glaze & Sand
Details
     

 04-18-2023
2.40
Windscreen
Details
     

 04-17-2023
1.20
Snorkel Glazing and Sanding
Details
     

 04-16-2023
4.70
Windscreen
Details
       

 04-15-2023
1.00
Windscreen
Details
       

 04-15-2023
7.50
Wheel Pant Work
Details
       

 04-13-2023
1.60
Sand Snorkel
Details
     

 03-11-2023
6.50
Work on Wheel Fairings
Details
       

 03-10-2023
2.00
Snorkle & Windscreen
Details
       

 03-07-2023
0.00
ABQ Visit to the Twins
Details
       

 02-28-2023
0.00
Izzybear Parts
Details
       

 02-26-2023
2.70
Oil Cooler Install and Snorkle Micro
Details
       

 02-25-2023
1.90
More Snorkle - Skirt - and Oil Moount Work
Details
       

 02-24-2023
0.00
Winter break with Grandchildren
Details
       

 02-24-2023
0.00
Winter Break Visit from Grandchildren
Details
       

 02-20-2023
2.20
Snorkle Micro & Sand
Details
       

 02-18-2023
3.60
Oil Cooler Removed to Paint Frame
Details
       

 02-17-2023
1.50
Paint Canopy Handle & Work Windscreen
Details
       

 02-15-2023
2.40
Modify Canopy Handle & Complete Latch
Details
       

 02-12-2023
1.40
More Snorkle Work
Details
       

 02-11-2023
3.00
Work Snorkle Insert & Bond Cowl Ducts
Details
       

 02-11-2023
3.60
Rivet Hinges on Cowlings with Pro-seal
Details
       

 02-10-2023
4.40
More Snorkle and Cowl Hinge Work
Details
       

 02-09-2023
4.30
Snorkle and Cowl Hinges
Details
       

 02-08-2023
2.80
Cowl Hinges & Snorkle
Details
     

 02-06-2023
1.80
Top Cowl Hinges and Tape Cowl
Details
       

 02-05-2023
2.50
Clean Shop and Tape Top Cowling
Details
       

 02-02-2023
1.00
Baffles Return and Flox Snorkle
Details
       

 01-18-2023
5.80
Complete Baffle Parts and Remove Baffles
Details
       

 01-17-2023
6.10
Complete Baffle Seal Brackets
Details
       

 01-16-2023
7.40
Front Baffles completed and installed baffles
Details
       

 01-15-2023
7.60
Baffles and Snorkle
Details
       

 01-14-2023
7.30
Engine Baffles & Snorkle
Details
       

 01-13-2023
4.80
Finish and Rivet Baffles
Details
       

 01-12-2023
2.80
Baffle Flanges and Prep
Details
       

 01-11-2023
1.80
Baffles Misc
Details
       

 01-10-2023
1.80
Baffle and Cowl Ducts
Details
       

 01-08-2023
3.90
Cowl Inlets and Baffle Trimming
Details
       

 01-07-2023
3.70
Baffles, Oil Line, Cowl Inlet Ducts
Details
       

 01-06-2023
1.40
Oil Line Hole in RIght Ramp Baffle
Details
       

 01-05-2023
2.20
Baffle Seal Backup Angles
Details
       

 01-04-2023
1.90
Flanges for Rear Baffles
Details
     

 01-03-2023
2.10
Baffle Ignition Wire Pass-thru's
Details
       

 01-02-2023
5.40
Rear Baffle Flanges
Details
       

 01-01-2023
2.60
Baffle Flanges
Details
       

 12-31-2022
4.80
Baffle Conical Gusset
Details
       

 12-30-2022
4.80
Front Baffle, Oil Cooler Support & Filter Mount
Details
       

 12-30-2022
1.50
Cut top cowling inlets
Details
     

 12-29-2022
1.90
Sand Right Side of Canopy Skirt
Details
     

 12-29-2022
3.00
Baffles
Details
     

 12-28-2022
3.60
Baffle Angle Clips
Details
       

 12-27-2022
3.20
Front Engine Baffles and Left Ramp Support plate
Details
       

 12-22-2022
1.90
Left Ramp Support Plate and Right Ramp Baffle
Details
       

 12-21-2022
1.40
Baffles
Details
       

 12-20-2022
1.80
Work Left Ramp and Filter Brackets
Details
     

 12-19-2022
2.10
More Baffle Tweaking
Details
       

 12-18-2022
3.90
More work on Ramps and Forward Baffles
Details
       

 12-17-2022
4.70
Ramps and Snorkle
Details
       

 12-16-2022
3.60
Snorkle-Left Inlet Ramp-Cowl Inlets
Details
       

 12-15-2022
1.70
Modify Snorkle
Details
       

 12-14-2022
2.30
Snorkle & Ramp
Details
       

 12-13-2022
1.40
Ramp and Snorkle
Details
     

 12-12-2022
1.60
Left Inlet Baffle & Snorkle
Details
     

 12-11-2022
3.30
Left Ramp and Snorkle Work
Details
     

 12-10-2022
4.30
Front Bafffle and Cowling
Details
       

 12-08-2022
1.40
Front Baffles
Details
     

 12-07-2022
1.20
Super-fil Right Canopy Skirt
Details
     

 12-06-2022
3.90
Trim and Finish Baffle Edges
Details
       

 12-05-2022
3.20
More Baffle Work
Details
       

 12-01-2022
5.80
Baffles
Details
       

 11-30-2022
4.40
Aileron Bellcrank Brack Upgrade #4
Details
     

 11-23-2022
0.70
Aileron Bellcrank Brack Upgrade #3
Details
       

 11-22-2022
3.20
Aileron Bellcrank Brack Upgrade #2
Details
       

 11-21-2022
1.10
Aileron Bellcrank Brack Upgrade
Details
     

 11-12-2022
2.80
Sand and SuperFil Canopy Skirt
Details
       

 11-11-2022
1.10
Sanding Skirt on Canopy
Details
     

 11-10-2022
2.00
Glass the Rivets
Details
       

 11-09-2022
2.30
Oil Cooler Adapter
Details
       

 11-08-2022
5.10
Baffle, Oil Cooler, & Misc
Details
       

 11-07-2022
2.20
Snorkle & Oil Cooler
Details
       

 11-06-2022
2.30
Working Left Baffle Inlet Ramp
Details
       

 11-05-2022
8.20
Another Baffle Session
Details
       

 11-04-2022
3.10
Working the Right Inlet Baffle Ramp
Details
       

 11-03-2022
1.70
Baffles general cleanup and fitting
Details
     

 11-02-2022
1.50
Baffle Fitting
Details
     

 11-01-2022
3.10
Baffles for Cylinders 1 & 2
Details
       

 10-31-2022
2.60
Work on Baffles 3 & 4
Details
       

 10-30-2022
3.60
Baffle (cont)
Details
       

 10-29-2022
10.30
A Baffling Session
Details
       

 10-28-2022
2.10
Sand Cowling Edges
Details
       

 10-27-2022
1.30
Baggage Door Work
Details
       

 10-26-2022
1.90
Mark Cowling for Final Trim
Details
     

 10-25-2022
0.00
ICON Flashlight worked great!!!
Details
       

 10-25-2022
1.20
Completed Drilling Top Cowling Hinge
Details
       

 10-24-2022
0.00
Fix the old Roller Bag
Details
       

 10-22-2022
7.10
Top & Bottom Cowl Side Cuts
Details
       

 10-21-2022
1.00
Top Skin and Baggage Gas Spring
Details
       

 10-16-2022
3.20
Bottom Cowling (cont)
Details
       

 10-15-2022
5.20
Begin Cutting Bottom Cowl
Details
       

 10-14-2022
2.70
Cut and Fit Top Cowl
Details
       

 10-13-2022
1.80
Level Airplane and Mark for Cowling Trimming
Details
       

 10-12-2022
1.40
Completed Baggage Door Latch Blocks
Details
       

 10-11-2022
2.30
Front Baggage Door Blocks
Details
       

 10-10-2022
4.30
Baggage Door and Blocks
Details
       

 10-09-2022
2.20
More Baggage Door work
Details
       

 10-08-2022
0.00
Trip to Florida
Details
       

 09-25-2022
1.80
Work Top Cowling and Baggage Door Install
Details
       

 09-24-2022
3.60
Work on Top Cowl and Oil Door #2
Details
       

 09-23-2022
1.10
Fab Oil Door
Details
       

 09-20-2022
0.00
Novak Kolb Trip
Details
       

 09-19-2022
1.70
Start working on Cowling
Details
     

 09-07-2022
1.90
Shop Clean up - Carts
Details
       

 09-06-2022
2.00
Shop Clean up - Benches
Details
       

 09-05-2022
4.00
Complete Top Skin and Misc
Details
       

 09-05-2022
4.10
Complete Top Skin and Misc
Details
       

 09-04-2022
5.10
Rivet Top Skin
Details
       

 09-03-2022
4.10
Forward Skin Supportw, Skybolt Flanges, Wiring
Details
       

 09-03-2022
4.10
Forward Skin Support, Skybolt Flanges, Wiring (co
Details
       

 09-02-2022
1.50
Worked on dressing some wiring with Ralph
Details

 08-31-2022
2.10
Install Red Cube Bracket, Fittings, & Safety Wire
Details
       

 08-30-2022
2.40
Finish Red Cube Bracket
Details
       

 08-29-2022
2.10
Red Cube Bracket
Details
       

 08-28-2022
2.70
Completed Cowling Spacer Front Plate
Details
       

 08-21-2022
0.00
Trip to DFW Novak Aircraft Factory
Details
       

 08-17-2022
1.40
Cowlng Spacer
Details
       

 08-15-2022
1.90
Cowling Spacer
Details
     

 08-14-2022
3.90
Cowling Spacer (cont)
Details
       

 08-13-2022
3.10
GPS hole in top skin / Cowling Spacer
Details
       

 08-11-2022
0.90
Finish up Cowling Spacer
Details

 08-10-2022
2.60
Red Cube Line & Cowling Spacer
Details
       

 08-09-2022
1.40
Design Cowling Spacer
Details
     

 08-07-2022
1.30
Red Cube Hose & GPS Antenna
Details
       

 08-06-2022
7.20
OAT & Pitot-Static Lines
Details
       

 08-06-2022
2.50
AOA Mount
Details
     

 07-30-2022
5.20
Avionics Configuration, Hoses and Misc
Details
       

 07-22-2022
0.70
New Dessicant
Details
     

 07-14-2022
3.20
Dimmer Control Spacers & Starter Cable v2.0
Details
       

 07-13-2022
2.50
Configure Garmins and spacers
Details
       

 07-12-2022
1.60
Measure Throttle Body/ Servo Hose & Organize
Details
       

 07-10-2022
1.40
FT-60 and Shelves
Details
     

 07-09-2022
8.50
Working Avionics
Details
       

 07-05-2022
2.40
Fittings and Starter Cable
Details
     

 07-04-2022
1.30
FT-60 Red Cube
Details
       

 07-03-2022
4.80
Ralph back in the shop
Details
       

 07-03-2022
4.00
Console Wiring and Clamp
Details
       

 07-02-2022
2.60
Cable Support Bracket and more Research
Details

 07-01-2022
1.50
Temp Install of Fuel Servo and Exhaust
Details
       

 06-30-2022
1.30
Oil Cooler Fittings and Hose Measuring
Details
     

 06-28-2022
1.90
Work Photos and Engine Standoff
Details
       

 06-27-2022
1.10
Install Throttle Body & Take Photos
Details
       

 06-26-2022
4.80
Ralph working on Electrical
Details
       

 06-26-2022
3.50
Misc Electrical and Avionics Items
Details
       

 06-25-2022
4.70
Ralph Assistance with Electrical
Details
       

 06-25-2022
2.50
Finish TCW Mount
Details
       

 06-24-2022
1.30
TCW Hold Down Buttons and Mount
Details
       

 06-23-2022
1.40
TCW Battery hold downs
Details
       

 06-22-2022
0.00
Pensecola Trip to see the Twins
Details
       

 06-18-2022
1.60
Repair pins on GTN-650
Details
       

 06-16-2022
2.00
Smoke Tank Feed Line
Details
       

 06-16-2022
1.20
Garmin G3X update and GTN-650
Details

 06-13-2022
2.40
Clean Shop & Smoke Hose
Details
       

 06-13-2022
2.50
Attach Engine Mount & Misc items
Details
       

 06-12-2022
10.50
EPIC DAY.....Avionics Energized & Engine Hung!!!
Details
       

 06-11-2022
3.30
Right Switching Console & Starter Light (cont)
Details
       

 06-11-2022
3.30
Right Switch Console (Part 1)
Details
       

 06-10-2022
7.80
Ralph over for a work session
Details
       

 06-10-2022
3.00
Landing Gear Work
Details
       

 06-10-2022
0.00
Babysitting and Building
Details
       

 06-08-2022
1.70
Starter Switch Wires
Details
     

 06-07-2022
2.60
Smoke tank and wire tying
Details
       

 06-06-2022
1.60
Pmag Ground Wire & Remove Smoke Tank
Details
       

 06-05-2022
0.00
Women Can Fly Event at HWY
Details
       

 06-04-2022
0.00
Women Can Fly Event at HWY
Details
       

 06-03-2022
0.80
Pmag Wire Harness
Details
       

 06-02-2022
1.60
Tie Wires and Remove Ground Wire from Bundle
Details
       

 06-01-2022
2.60
Regulators
Details
       

 05-31-2022
2.90
More Right Console Wiring
Details
     

 05-30-2022
3.90
Right Console and misc
Details
       

 05-29-2022
2.50
Right Console Panel Wiring
Details
     

 05-28-2022
2.30
Complete Smoke Tank Install
Details
       

 05-27-2022
1.50
Right Console Warning Lights
Details
     

 05-25-2022
1.80
Smoke Tank & misc
Details
       

 05-24-2022
1.70
Shop Clean up
Details
       

 05-23-2022
2.30
Vans Call and bunch of misc stuff
Details
       

 05-22-2022
2.00
Stick Labels
Details
     

 05-21-2022
2.00
Regulators and Smoke Tank
Details
       

 05-21-2022
7.00
Landing Gear and Sensors
Details
       

 05-20-2022
1.50
Prime Parts Move stuff to shop
Details
     

 05-19-2022
2.40
Wheels & Tires Assembled
Details
       

 05-18-2022
1.30
Wheel Fairing Parts
Details
       

 05-17-2022
2.70
Remake Canopy Handle (cont)
Details
       

 05-16-2022
2.20
Wheels, Brakes, and Canopy Handle
Details
       

 05-15-2022
4.40
Smoke Tank Manifold and Lines
Details
       

 05-14-2022
5.00
Check power and grounds and misc wiring
Details
       

 05-13-2022
2.60
Smoke Tank Manifold
Details
       

 05-12-2022
1.70
Epoxy Smoke Tank Mount & Misc
Details
       

 05-11-2022
2.30
Smoke Pump Motor Mount (cont)
Details
       

 05-10-2022
1.10
Motor Mount for Smoke Pump
Details
     

 05-08-2022
4.10
Smoke Tank Install (cont)
Details
       

 05-07-2022
4.30
Smoke Tank Installation
Details
       

 05-04-2022
1.60
Floor panel & Control Stick Adel Clamp
Details
       

 05-03-2022
2.20
AOA Lines - Lacing - F/W Pass Thru's
Details
       

 04-27-2022
1.30
Install Pitot Tube Line
Details
       

 04-26-2022
2.00
Advanced AOA Plumbing (cont)
Details
       

 04-25-2022
2.10
Advanced AOA Plumbing
Details
       

 04-24-2022
3.10
Tying wires and lost washer
Details
       

 04-23-2022
7.20
Ralph over to help
Details
       

 04-23-2022
5.00
Electrical and Misc
Details
       

 04-22-2022
1.70
Cable Brackets
Details
       

 04-21-2022
1.80
Misc Electrical Work
Details
       

 04-20-2022
0.90
Electrical Bay Ground Wires
Details
     

 04-19-2022
2.90
Ground Wires in Electrical Bay
Details
       

 04-17-2022
0.50
Electrical Bay Ground wires
Details

 04-08-2022
0.80
Electrical Bay Wire Routing
Details
     

 04-07-2022
1.50
Pickle and Route Wires
Details
       

 03-29-2022
3.00
Ralph Assisting again tonight
Details
       

 03-29-2022
4.00
Bob the wire router
Details
       

 03-28-2022
3.50
Ralph assistance again
Details
       

 03-28-2022
4.00
Firewall Pass thru and wiring
Details
       

 03-27-2022
4.00
Ralph Assistance Again
Details
       

 03-27-2022
5.00
Misc items for firewall
Details
       

 03-26-2022
4.00
Ralph in the house again!
Details
       

 03-26-2022
4.00
Continued on various electrical stuff
Details
       

 03-25-2022
2.50
Right Console Switching Panel #3
Details
       

 03-24-2022
2.90
Right Console Switching Panel #2
Details
       

 03-23-2022
2.20
Right Console Switching Panel #1
Details
       

 03-22-2022
2.80
Right Eyebrow Panel and Console
Details
       

 03-21-2022
2.10
Pitot and Wing Landing Lights
Details

 03-20-2022
3.10
Pitot and OAT Probe Wiring
Details
       

 03-19-2022
4.50
Panel Switch Wiring
Details
       

 03-18-2022
2.80
Buss Short Troubleshoot / Panel Lettering
Details
       

 03-17-2022
2.60
Wire GT-50 and Boost Pump Switch
Details
     

 03-16-2022
0.90
Fuse-Relay Panel Lettering
Details
     

 03-15-2022
1.60
Spar Cap Installation (cont)
Details
       

 03-14-2022
3.10
Spar Cap Installation
Details
       

 03-10-2022
2.60
Modify Spar Caps
Details
       

 03-08-2022
1.70
Sort & Tie Wires in Fuse-Relay Bay
Details
       

 03-07-2022
1.80
Fuse Block Matrix & Starter Engaged Light
Details
       

 03-06-2022
1.00
Fuse-Relay Bay
Details
       

 03-03-2022
2.20
Fuse Block Wiring #6
Details
     

 03-02-2022
2.30
Fuse Block Wiring #5
Details
     

 03-01-2022
2.80
Fuse Block Wiring #4
Details
       

 02-28-2022
2.20
Fuse Block Wiring #3
Details
       

 02-27-2022
3.60
Fuse Block Wiring #2
Details
       

 02-26-2022
5.40
Fuse Block Wiring #1
Details
       

 02-25-2022
5.30
Wire CB Panel (cont)
Details
       

 02-24-2022
3.70
Wire CB Panel
Details
     

 02-23-2022
0.00
Grandchildren Riley and Levi Visit
Details
       

 02-22-2022
2.40
Panel Switch Wires #6
Details
     

 02-21-2022
6.30
Panel Switch Wires #5
Details
     

 02-20-2022
2.50
Panel Switch Wires #4
Details

 02-19-2022
2.00
Panel Switch Wires #3
Details
     

 02-18-2022
3.50
Panel Switch Wires #2
Details
       

 02-17-2022
3.30
Panel Switch Wiring #1
Details
     

 02-16-2022
2.20
Ignition Buss
Details
       

 02-15-2022
2.30
Ignition Buss
Details
       

 02-14-2022
0.70
Ignition Buss Bar
Details
     

 02-13-2022
5.80
Wiring Pitch Servo & Ignition Buss
Details
       

 02-13-2022
5.80
Ralph back over to help with electircal
Details
       

 02-10-2022
1.20
Panel Indicator Light Ground Wires
Details
       

 02-09-2022
2.30
Panel Indicator Lights Dsub ground
Details
       

 02-08-2022
2.20
Make Dsub bracket for Panel Indicator Light Ground
Details
       

 02-07-2022
1.90
Right Console Panel & Dsub bracket
Details
       

 02-06-2022
2.80
IGN Buss and Right Console Panel
Details
       

 02-05-2022
7.00
Wiring Help from Ralph
Details
       

 02-05-2022
7.80
CB Panel and Instrument Panel
Details
       

 02-03-2022
1.70
Complete Buss Bar and Work CB Panel
Details
     

 02-02-2022
2.90
Labels and CB Wiring
Details
       

 02-01-2022
3.60
Wire Chrono and labeling
Details
     

 01-31-2022
1.90
Pitch Servo
Details
       

 01-30-2022
3.10
Labeling Panels #2
Details
       

 01-29-2022
7.10
Labeling Panels #1
Details
       

 01-28-2022
3.90
Wing Lights Wiring
Details
       

 01-27-2022
3.10
Wiring Wing Lights
Details
       

 01-26-2022
1.50
Nav and Suntail Connector & Labels
Details
       

 01-25-2022
2.40
Wing light wiring
Details
       

 01-24-2022
1.10
Lighting wires
Details
     

 01-23-2022
5.20
Rudder Fairing, Strobe Lights & Misc
Details
       

 01-22-2022
4.60
Strobe lights and Misc
Details
       

 01-21-2022
0.60
Remove Flooring & Seat
Details
     

 01-20-2022
2.20
Shop Clean up and General Wiring
Details
     

 01-19-2022
1.70
Flood Light Grounds and AOA wiring
Details
     

 01-18-2022
2.70
Ground Wire Terminals for Panel Ground Block
Details
       

 01-17-2022
5.50
Switch washers and wiring
Details
       

 01-16-2022
3.30
Wing Tips stiffiners and hinge blocks
Details
       

 01-15-2022
5.20
Make and Install Lower Wing Tip Stiffiners
Details
       

 01-14-2022
3.40
Complete and Bond Stiffiners
Details
       

 01-13-2022
1.30
Foam Stifffiners
Details
     

 01-12-2022
1.40
Seat test, selected upholestry, and redied for shi
Details
       

 01-10-2022
1.50
Reinstall Floors and seats
Details
       

 01-09-2022
4.60
Wingtip Pin Retainer Blocks & Foam Stiffiners
Details
       

 01-08-2022
1.70
Wing Tip Hinge Blocks
Details
     

 01-08-2022
3.00
Aeroled Landing and Navigation Lights
Details
       

 01-07-2022
2.60
AeroLed Lights Installation
Details
       

 01-06-2022
3.20
AeroLED Leftt Landing Light
Details
       

 01-05-2022
1.70
AeroLED Right Landing Light
Details
       

 01-04-2022
1.30
Landing light wingtip install
Details
     

 01-02-2022
2.50
Canopy Latch and exterior handle
Details
     

 01-01-2022
4.20
Wing Tip Sanding, Ribs, Lights
Details
     

 01-01-2022
2.20
Canopy handle latch
Details
     

 12-31-2021
3.20
Trimmed and flox wing tips
Details
     

 12-31-2021
3.00
Counterbores for Switches and CB's
Details
     

 12-30-2021
4.40
GPS Mount and COAX Connectors
Details
       

 12-29-2021
4.20
Wing tip ribs and COAX Cables
Details
       

 12-28-2021
0.80
COAX Connector dry run
Details
     

 12-27-2021
2.90
Wing Tip Ribs
Details
       

 12-26-2021
4.90
Wing Tip Ribs
Details
       

 12-19-2021
2.00
Handle and Labels
Details
       

 12-15-2021
1.90
Label Work..getting close to done!
Details
       

 12-13-2021
2.10
Floors and run COAX
Details
       

 12-12-2021
2.40
Park Brake and Alt Air Cable Mod #4
Details
       

 12-12-2021
2.00
Label Work
Details
     

 12-11-2021
5.30
Park Brake and Alt Air Cable Mod #3
Details
       

 12-10-2021
4.40
Park Brake and Alt Air Cable Mod #2
Details
     

 12-09-2021
4.50
Park Brake and Alt Air Cable Mod
Details
     

 12-09-2021
1.60
More working with Labels
Details

 12-08-2021
4.80
More label design
Details
     

 12-07-2021
1.30
More Lettering for panels - Jims stick
Details
       

 12-06-2021
3.30
More work on labels
Details

 12-05-2021
3.40
More panel lettering
Details
       

 12-04-2021
2.50
New Panel Lettering
Details
     

 12-02-2021
3.40
AMP Bracket & Nylon insulator
Details
       

 12-01-2021
1.70
PIC Stick AMP Connector
Details
       

 11-30-2021
3.10
Seat Height Check & PIC AMP Plug
Details
       

 11-29-2021
2.70
Install Front seat floor - Flap actuator nutplates
Details
       

 11-28-2021
6.90
More Flooring and Hinges & Misc items
Details
       

 11-27-2021
3.80
Remove Flap Actuator & GIB Seat Hinge
Details
       

 11-23-2021
2.90
Reinforce Wing Tip Trailing Edge
Details
       

 11-22-2021
0.00
AOA Positioning (Continued)
Details
       

 11-22-2021
3.20
AOA Display Positioning
Details
       

 11-21-2021
7.50
More Electrical / Avionics
Details
       

 11-20-2021
4.80
CB Panel re-work and Misc
Details
       

 11-19-2021
2.10
PIC Stick & Misc
Details
     

 11-18-2021
1.60
Mount Fwd D-sub Bracket
Details
     

 11-17-2021
1.90
D-sub bracket for inputs/outputs
Details
       

 11-16-2021
2.30
Working on labels......again!
Details
     

 11-15-2021
2.60
Smart Glide Switch and AMP Bracket
Details
       

 11-14-2021
4.60
Left Wingtip rib & misc items
Details
       

 11-13-2021
7.00
Various Avionics Items
Details
       

 11-13-2021
10.30
Ralph in the House for wiring stuff today!
Details
       

 11-12-2021
1.80
Left wing tip rib
Details
     

 11-11-2021
2.80
Mark Cut lines on wing tips and Rt Tip Rib
Details
       

 11-10-2021
4.40
Canopy handle and GIB Stick wiring
Details
       

 11-09-2021
2.70
Run Glide Switch ground and D-sub, Seats
Details
       

 11-08-2021
0.70
Run wire for SMART GLIDE
Details
     

 11-08-2021
1.00
Footwell nutplates riveted
Details
     

 11-07-2021
2.50
Foot well attach screws
Details