1.Cleaned surface of canopy frame with mek 2.placed asked tape on selected areas. 3.Found paint gun. 4.Mixed primer per mnfrs directions 5.Strained primer into paint gun. 6.Placed canopy frame on plywood and saw horses. 7.Sprayed one coat; turned canopy frame over; shot second coat. 8.After curing, removed areas of excess buildup, and sprayed third coat. 9.Allowed to cure, and placed in shop. 10.Poured remaining primer in sealed jar. 11.Cleaned paint gun with mek. 12.(one day passes) 13. Placed canopy frame on plywood and saw horses. 14.Mixed red coating per mnfrs directions. 15.Strained into sprayer. 16.Sprayed both sides of canopy frame. 17. After curing, removed areas of excess buildup, and sprayed third coat. 18.Allowed to cure, and returned canopy frame to shop. 19.Poured remaining primer in sealed jar. 20.Disassembled paint gun, and cleaned in ultrasonic mek bath.