06/20/19: 1.05Hrs Step 1. The C-1210 canopy lift handles were fabricated from 3/4 x 3/4 x .063 Aluminum angle. The lift handle was clecoed to the C-1202 canopy skirt. The hole in the canopy skirt was used as a guide for drilling the lift handle.
06/21/19: .48Hrs Step 2. The C-1202 canopy was placed on the WD-1219 canopy frame and then both parts were clecoed.
04/13/20 3.1Hrs
Step 3. The canopy skirts were riveted to the canop frame.
04/13/20 0.75Hrs Step4. The canopy was screwed to the frame
