Brief Description: Rivet F-709 and Stringer Supports
I used the squeezer to rivet on the F-709 bulkhead. Also used the squeezer to rivet on the tabs for my extra stringer in the aft skin. I installed the forward and aft top skins to prepare for drilling the doubler holes in the F-707 bulkhead. Looking through the skin holes it appeared the holes were too far aft on the flange (bulkead too far forward). I marked the holes and dis assembled the skins and sure enough, the holes were too far aft. Somehow this gusset must have moved after I thought I positioned it before drilling to the longeron.
