Mark Johnson - Experimental Aircraft Builder's Log

Mark's Web Site

Work Logs Found: 79

Category Work Time: 241 Hours

Date	Hours	Work Log Summary	Details
09-08-2018	1.00	Wing tip lights final install (40-10)	Details


09-01-2018	1.00	wing tip light check (40-10)	Details


12-27-2017	2.00	Wing Skin Replace (17-05)	Details


09-05-2015	0.50	Wing tip fiberglass (40-08)	Details


09-04-2015	0.50	Wing tip light fiberglass work (40-08)	Details


06-16-2015	1.00	Attach Flaperon Temperorarily (18-06)	Details


06-15-2015	2.00	Finish up right flaperon (18-06)	Details


06-13-2015	2.00	Right flaperon skins attached (18-06)	Details


06-06-2015	5.00	Right Flaperon assembly (18-05)	Details


05-30-2015	1.00	Left flaperon complete (18-06)	Details


05-29-2015	2.00	Attaching nose skins to flaperon (18-06)	Details


05-28-2015	2.00	Attach flaperon trail edge skin (18-06)	Details


05-27-2015	4.00	Prepare and assembly flaperon ribs (18-05)	Details


05-26-2015	1.00	Attached pivot brackets (18-05)	Details


05-25-2015	1.00	Assembled inbd nose rib & hinge bracket (18-04)	Details


05-23-2015	2.00	Drilled Counterbalance leading edge holes (18-03)	Details


05-22-2015	1.00	Prep for match-drill counterbalance	Details


05-19-2015	1.00	Rivet outboard nose rib to counterbalance (18-03)	Details


05-18-2015	2.00	Start Flaperon assembly (18-02)	Details


05-16-2015	2.00	Right wing tip (17-06)	Details


03-28-2015	4.00	Rivet and close up the right wing (17-06)	Details


03-14-2015	6.00	Right Wing Tip underside (17-06)	Details


02-28-2015	1.00	Right Wing Tip (17-05)	Details


02-21-2015	4.00	Finished main skins on right wing (17-04)	Details


02-20-2015	4.00	Final shaping of wing doubler (17-04)	Details


02-14-2015	8.00	Instsal top skins on right wing (17-04)	Details


01-30-2015	3.00	Complete landing light installation (40-03)	Details


01-29-2015	3.00	Right wing outboard hing bracket (17-03)	Details


01-26-2015	3.00	Right wing leading dege and hinge (17-03)	Details


01-24-2015	3.00	Right wing lower skins (17-02)	Details


01-15-2015	6.00	Landing light cutout, and lens fabricate (40-03)	Details


01-10-2015	3.00	Landing light cutout (40-02)	Details


01-08-2015	1.00	Finsh access hole for right wing tip light (40-02)	Details


01-07-2015	1.00	Right Wing tip access opening (40-02)	Details


01-06-2015	1.00	Replacement skin damage	Details


01-05-2015	2.00	Finshed up the left Wing for now (17-05)	Details


01-03-2015	5.00	Wing tip light prep (40-08)	Details


01-02-2015	6.00	Left wing tip attachment (17-05)	Details


01-01-2015	2.00	Wing tip edges riveted in place (17-05)	Details


01-01-2015	3.00	Wing tip edge rib channels (17-05)	Details


12-31-2014	2.00	Left wing tip upper skin (17-05)	Details


12-30-2014	4.00	Left wing handle and wing tip (17-05 & 40-02)	Details


12-29-2014	6.00	Wing walk doubler installation (17-04)	Details


12-29-2014	3.00	Adding the final skin to the Left wing (17-04)	Details


12-29-2014	2.00	Access pannel cover (17-04)	Details


12-27-2014	4.00	Left wing upper skins (17-03)	Details


12-26-2014	6.00	Attaching hinge ribs (17-03)	Details


12-23-2014	8.00	Left wing skins (17-02)	Details


12-22-2014	1.00	Landing light cut-out mishap (14-02)	Details


12-20-2014	6.00	Landing light cut out (40-02 & 40-04)	Details


12-18-2014	8.00	Underside wing skin install (17-02)	Details


12-17-2014	5.00	Right wing fwd rib & wire install (15-07 & 40-05)	Details


12-16-2014	3.00	Right wing, aft ribs installation (15-06)	Details


12-13-2014	5.00	Attach Left inboard wing skin (17-02)	Details


12-06-2014	2.00	Stall Warning attachment (16-03)	Details


12-02-2014	3.00	Stall Warning Assembly (16-02)	Details


12-01-2014	2.00	Attachin more nose ribs - left wing (15-05)	Details


11-26-2014	2.00	Attaching the nose ribs on left wing (15-05)	Details


11-25-2014	1.00	Left Wing Assembly (15-04)	Details


11-25-2014	1.00	Left Wing Assembly (15-04)	Details


11-24-2014	4.00	Finished the last of the ribs (15-03)	Details


11-22-2014	10.00	Finishing up all the wing ribs (15-03)	Details


11-08-2014	8.00	Fwd Wing Rib deburr and prep (15-02)	Details


10-06-2014	1.00	Wing rib flange tab removal process (15-02)	Details


10-04-2014	1.00	Deburring wing ribs (15-02)	Details


09-29-2014	3.00	Wing Rib Deburring (15-02)	Details


09-27-2014	2.00	Right & Left Rear spar assembly (14-03)	Details


09-20-2014	4.00	Right & Left Rear spar assembly (14-03)	Details


09-15-2014	2.00	Hinge bracket - lesson learned (14-02)	Details


09-12-2014	1.00	Rivet Hinge Brackets (14-02)	Details


09-08-2014	5.00	Prime & Rivet Stub Spar Assembly (14-02)	Details


09-06-2014	3.00	Stub Spar countersink (14-02)	Details


09-05-2014	5.00	Stub Spar Assembly (14-02)	Details


09-01-2014	3.00	Complete spar assembly rivets (13-03)	Details


08-30-2014	1.00	Drill and tap AEX tie downs (13-02)	Details


08-23-2014	5.00	Match drill rib doubler and prep brackets (13-02)	Details


08-16-2014	3.00	Wing spar (13-02)	Details


07-26-2014	3.00	Wing Kit Inventory	Details


07-23-2014	0.00	Wing Kit Arrives	Details

	SITE NAVIGATION

Contact Builder

RV-12 Home

Category		# Logs	# Hours

All		632	1257

Avionics		23	22

Certification		1	1

Empennage		76	176

Engine		67	78

Finishing		144	290

Flight		3

Fuselage		163	348

Miscellaneous		2

None		9	3

Paint		24	50

PAP		14	18

Service Bulletin		21	30

Shop Supplies		4

Tools		2

Wings		79	241