KitLog pro

Powered By Kitlog Pro v2.0

LANCE'S WEB SITE
Work Logs Found: 162
Category Work Time: 442 Hours
 Date
Hours
Work Log Summary

Details

 12-30-2023
3.00
Right Wing Locker cut out
Details
       

 11-27-2023
4.00
Fuel Sender cover
Details
       

 08-20-2023
1.00
Pitot Heater Controller Mounting
Details
       

 08-13-2023
4.00
Pitot mount work
Details
       

 07-17-2023
1.00
Pitot nut plate drilling
Details
       

 07-04-2023
6.00
Pitot reinforment box work
Details
       

 07-02-2023
3.00
Pitot inspection panel
Details
     

 06-27-2023
2.00
Rt Wing fuel line pressure check
Details
     

 06-26-2023
3.00
t wing fuel lines installed
Details
       

 05-29-2023
4.00
Rt Wing fuel lines
Details
     

 03-26-2023
4.00
Rt wing bellcrank support and lower wing skin stif
Details
       

 02-11-2023
3.00
Replaced front rib #3 on Rt Wing
Details

 01-31-2023
1.50
Drilled holes for rt wing fuel lines in leading ed
Details
     

 01-28-2023
3.00
Rt Wing Fuel Sender hole cut
Details
       

 01-28-2023
1.50
Rt Wing Fuel Filler Cleanup
Details
       

 01-25-2023
2.00
Rt Wing Fuel Filler neck hole cut
Details
       

 01-22-2023
2.00
Rt Wing Fuel Sender jig
Details
       

 01-02-2023
2.00
Build wire bundle for RT wing landing/taxi/nav lig
Details
       

 12-30-2022
5.00
Debur right wing top and Cortec. Make fuel fill sp
Details
       

 12-23-2022
6.00
Drilled Landing Light mount and leading edge skin
Details
       

 11-28-2022
1.50
Releveling and drawing Landing Light channel flang
Details

 11-24-2022
5.00
Rt wing tank ProSeal and Landing Light mount nut p
Details
       

 11-22-2022
3.00
Rt wing fuel tank cut fuel drain and cork fuel tan
Details
       

 11-19-2022
2.00
Rt Wing Fuel Tank Sender cutout
Details
     

 11-17-2022
1.00
Rt Wing Landing Light hole Finish and Fuel Tank Pl
Details
       

 11-16-2022
2.00
Rt wing landing light hole cut continued
Details
       

 11-15-2022
2.50
Rt Wing Leading Edge drilling final and Landing Li
Details
       

 11-01-2022
2.00
Started drilling rt wing top of leading edge to no
Details
     

 10-31-2022
2.50
rt wing leading edge cleco'd and starting to align
Details
       

 10-30-2022
2.00
Flipped rt wing upsideright and began working on l
Details
       

 10-29-2022
4.00
Complete lower rt wing skin
Details
       

 10-28-2022
1.50
Rt wing lower skin, ribs, and spar scotchbrite and
Details

 10-25-2022
1.50
Continue to debur lower inside skin (finished)
Details

 10-24-2022
2.00
Debur rt wing inside skin

 10-22-2022
2.00
Debur debur debur the lower wing ribs, front spar
Details

 10-12-2022
2.00
rt wing ower deskin and debur
Details
       

 10-11-2022
3.50
Final drilled rt wing lower leading edge and final
Details
       

 10-10-2022
2.00
Rt Wing Lower Spar finish drilling and begin lower
Details
     

 10-09-2022
4.00
Rt Wing Lower Skin final drill and start leading e
Details
       

 10-09-2022
4.00
rt wing bottom skin align and drill
Details
       

 10-07-2022
1.00
Drilled and cortec'd wing locker rear upper suppor
Details

 10-05-2022
0.50
Lay rt wing back on it's top to prepare for bottom
Details

 10-04-2022
1.50
rt wing bellcrank and top skin support L channel r
Details
       

 10-03-2022
2.00
Rt Wing top skin support debur and cortec
Details
       

 10-01-2022
2.00
rt wing skin and bellcrank support final drilled
Details
       

 09-29-2022
2.00
Fabricated Rt wing top skin L channels
Details
     

 09-27-2022
2.00
Rt Wing first flip to start on the bottom
Details
       

 09-25-2022
1.00
Finished drilling Rt Wing top skin final hole size
Details

 09-23-2022
2.00
Rt Wing fabricate wing walk re-enforce sheet
Details
     

 09-21-2022
2.00
rt wing top skin final drill 1/2 done
Details
     

 09-20-2022
2.00
Right Wing top skin drill
Details
     

 09-18-2022
0.50
Drilled initial top skin rear spar holes, RT wing.
Details

 09-04-2022
2.00
Right Wing final rivet rear ribs (main and rear sp
Details
       

 09-03-2022
1.50
Rt Wing rear spar hand rivet all but ribs
Details
       

 08-28-2022
0.50
Drill wing locker lightening holes covers
Details
     

 08-24-2022
2.00
Cut out wing locker lightening holes covers
Details
     

 08-22-2022
1.50
Rt wing riveting wing locker braces
Details
     

 08-22-2022
2.00
Rt Wing locker tiedowns
Details
       

 08-21-2022
3.00
RT wing locker prep
Details
       

 08-20-2022
9.00
Right Wing scotchbrite and cortec
Details
       

 08-19-2022
5.00
Right Wing Leading edge ribs
Details

 08-17-2022
2.00
Right Wing Leading edge ribs
Details

 08-15-2022
2.00
Right Wing Leading edge ribs
Details

 07-16-2022
3.00
Nearly finished nose rib angles drills
Details
     

 07-10-2022
2.50
Rib #7 Right Wing and spare tip
Details
       

 07-04-2022
5.00
Start Right Wing
Details
       

 07-02-2022
3.00
Wing move to hanger
Details
       

 06-29-2022
3.00
Packing up the wing part 2
Details
       

 06-28-2022
2.00
Packing up the wing
Details

 03-04-2022
4.00
Shop cleanup and debur aileron holes
Details
     

 02-22-2022
2.00
Beginning torque marker
Details
       

 02-20-2022
2.00
Left Wing support ribs bottom of wing skin
Details
       

 02-15-2022
1.50
Left Wing Aileron Stop
Details
       

 02-14-2022
0.50
Wingtip consulation with Zenith
Details
       

 02-13-2022
3.00
Wingtip and aileron counterweight strike plates wo
Details
       

 02-05-2022
3.50
Left Aileron placed and drilled
Details

 01-22-2022
1.00
L channel down on bottom wing skin
Details

 01-20-2022
2.00
Left Wing root nose ribs and repressure test fuel
Details
       

 01-19-2022
1.50
Rivet Nose Rib #3 (tank rib)
Details
       

 01-18-2022
3.00
Squeeze rivets, locker door rivet, and heat shrink
Details

 12-30-2021
4.00
Reevaluate and asses what's next
Details

 12-08-2021
2.00
Left Wing Nav Light drill route and test
Details

 12-04-2021
1.50
Left Wing nav light wire bundle wax-string
Details

 04-03-2021
4.00
Fuel Sender access panel - Left Wing
Details
       

 02-02-2021
2.50
Leading edge ribs cleanup start.
Details

 01-30-2021
3.00
Flaps and Ailerons revival
Details
       

 01-24-2021
1.00
Replaced nose rib
Details
     

 01-17-2021
4.00
Left Wing Landing Light Lens trimmed and drilled
Details
       

 01-16-2021
6.00
Finished Landing Light mount drilling
Details
       

 01-15-2021
2.00
Landing Lights mount plate work
Details

 01-04-2021
2.00
Light kit mount build
Details
       

 01-03-2021
3.00
Landing Lights hole cut
Details
       

 01-01-2021
3.00
Fuel_tank_leading_edge_cuts
Details
       

 12-30-2020
2.00
Fuel cap skin cut work - left wing
Details
       

 12-29-2020
1.00
Fuel quick drain leading edge skin drill
Details
       

 12-28-2020
3.00
Last nose-rib skin drilling
Details
       

 12-24-2020
6.00
Access Panels
Details

 12-22-2020
2.00
Bottom Skin bell crank supports and Fuel Senders a
Details
       

 12-21-2020
2.00
walking skins and bad nuts
Details
       

 12-19-2020
8.00
Drilled and cleco'd upper leading edge left wing
Details
       

 12-18-2020
1.00
Added leading edge back on left wing
Details
       

 12-17-2020
4.00
Final drill nose-skin-to-spar and debur
Details
     

 12-13-2020
2.00
Leading edge Left wing and fuel system research.
Details
       

 12-10-2020
3.00
Riveted rear spar and Bottom Left Wing skin

 12-06-2020
3.00
Rear spar debur and prime, also rear rib backplate
Details

 11-30-2020
8.00
Final drill and debur left wing skin and rear ribs
Details

 11-29-2020
2.00
Left wing main spar rivet
Details

 11-18-2020
2.00
Remove Left Wing spar doubler for drilling
Details
     

 11-15-2020
2.00
Rear Wing Rib spacing issue
Details
       

 11-11-2020
3.00
Cut and drilled in left wing rib supports top skin
     

 11-07-2020
2.00
Bell Crank support channel
Details
     

 11-04-2020
2.00
Bell Crank question
Details
     

 11-03-2020
2.00
Flipping the left wing to work on the bottom
Details
       

 11-02-2020
2.00
Top Skin and rear rib drilling
Details
     

 11-01-2020
0.50
Continued drilling top skin...drilled myself
Details
     

 10-31-2020
3.00
Started Drilling Rear Spar and Top Skin
Details
       

 10-19-2020
2.00
Top Wing Skin questions
Details
     

 10-16-2020
1.00
First wing skin layed on
Details
     

 10-11-2020
1.00
Drilled Nose Rib Fuel hole
Details
     

 09-27-2020
2.00
Left Wing nose rib
Details

 09-09-2020
2.00
Bellcrank and Landing Lights purchase decision
Details

 09-06-2020
2.00
Rear Wing Rib spacing issue
Details
       

 08-26-2020
2.00
Questions for Roger about nose ribs
Details
       

 08-24-2020
5.00
Attaching Rear Ribs on left wing main spar
Details
       

 08-23-2020
2.00
Started attaching Rear ribs to Left Wing main spar
Details
     

 08-19-2020
1.00
Cortec Rear Ribs
Details

 08-17-2020
2.00
Debur and prep for Cortec
Details

 08-07-2020
2.00
Drilled and cleco'd rest of rear rib L supports
Details
       

 07-31-2020
2.00
Rear Rib L angle drilling ribs 1 through 4
Details
     

 07-30-2020
3.00
Rear Ribs
Details
       

 07-29-2020
2.00
Joined Rear Channel pieces
Details
     

 07-21-2020
2.00
Aileron closing - both
Details

 07-20-2020
2.00
Closing up 1st (Right) aileron
Details
       

 06-24-2020
3.00
Rebuilt outer mass balancer rib.
Details

 06-21-2020
0.50
Assemble ailerons after cortec
Details

 06-19-2020
3.00
Cortec Ailerons
Details

 06-18-2020
3.00
Final drilled rest of aileron (trim hing) and rib

 06-10-2020
3.00
Aileron trim actuator inspection hole
Details
       

 06-09-2020
1.00
Aileron trim actuator L-Channel prep
Details

 05-31-2020
6.00
Aileron trim hinge and actuator rod hole.
Details
       

 05-30-2020
3.00
Aileron rib blank and rib form
Details
       

 05-25-2020
4.00
channel-to-rib brace
Details
       

 05-22-2020
6.00
Cut out left aileron trim
Details
       

 05-19-2020
2.50
Left Aileron Mass Balancer
Details

 05-17-2020
3.00
Drilled Left Aileron
Details

 05-16-2020
4.00
Disassembled and Deburred Right Aileron
Details
       

 05-11-2020
2.00
Mass Balancer drilled arm and cut hole
Details
       

 04-22-2020
3.00
Mass Balancer ribs on the Right Side Aileron
Details

 04-15-2020
4.00
Right side Aileron
Details

 04-11-2020
10.00
Right Flap: debur, cortec, reassemble, rivet, hing
Details
       

 03-27-2020
1.00
Drill hinge - right flap
Details

 03-21-2020
8.00
Right Flap align and drill ribs, skin, and control
Details
     

 03-15-2020
5.00
Riveting and closing up Left Flap.
Details
       

 03-12-2020
1.00
Finish Cortec left flap and place ribs
Details

 03-08-2020
4.00
Deburred/Cortec Left Flap
Details

 02-23-2020
2.00
Flap Control plate and rib
Details
     

 02-08-2020
4.00
Aligning, drilling, and clecoing left flap ribs
Details
       

 02-07-2020
2.00
Control Plate
Details
     

 09-03-2019
1.00
Missing inventory part 2
Details

 09-01-2019
1.00
Finished inventory
Details

 08-31-2019
3.00
Started Inventory of Wing crate
Details
       

 08-02-2019
8.00
Picked up Wing kit with Kevin and James
Details
     










Copyright © 2001-2024 Matronics. All Rights Reserved.