| Date: |
4-11-2009 |
|
| Number of Hours: |
2.10 |
|
| Brief Description: |
Seat Belt Attach Webs |
|
|
Cut Z02-03 2x2 angle down to ~3/4" x 20+ inches. Cut relief radius and angles. Bent seat belt attach stock (3/16") up about 10 degrees. Drilled & cleco'd. Up-drilled to #30. Disassembled, deburred, and re-cleco'd in preparation for riveting. This completes SNX-F23-05L / -05R. |
||