| Date: |
10-4-2014 |
|
| Number of Hours: |
2.00 |
|
| Brief Description: |
Begin Aileron layout / building |
|
|
Found parts for first few steps and laid out to get a good visual of 'what goes where'. Laying out and doing both ailerons at the same time. Drilled out spar and doubler for A-904 ribs and nut plate. nut plate is for AN 3 bolt. Drilled out in steps; 30, 19, 13 and then reamed out to #12. Test drilled scrap to verify. Drilled and clecoed A904 Ribs to spars |
||