KitLog pro

Powered By Kitlog Pro v2.0

Steve & Nancy Riffe
' style=
Date:  7-23-2013
Number of Hours:  1.00
Manual Reference:  
Brief Description:  Joined aft portion of skirts-2

I unstrapped the skirts near the aft junction and removed the peel ply. Next, I removed the clecoes and the strap holding the skirts together. WOW—nothing moved-actually looks pretty decent. I sanded the edges of the new glass and ruffed up the lower area. I cut a couple of pieces of glass and mixed up a batch of resin. Wet the glass and applied to the aft lower skirt area. Smoothed out the glass with a stiff bristle brush and applied peel ply. Tomorrow, I’ll remove the skirts and apply some glass to the underside of the aft joint.
' style=

DRDT-2 used to anchor hold-down strap

DRDT-2 used to anchor hold-down strap

' style=

Glass after peel ply removed

Glass after peel ply removed

' style=

Glass added to lower portion followed by peel ply

Glass added to lower portion followed by peel ply

' style=










Copyright © 2001-2024 Matronics. All Rights Reserved.