Trimmed rear portion of top front skin on the right side—same as on the left side. Spent the rest of the time drawing a center line from the F810 bulkhead to the firewall. Marked center at the rear of the canopy frame, the front bow of the frame, the roll bar and down the center of the top front skin. Also drew a line 3.25” laterally on the top front skin—plans show this is the forward point of the windscreen. Adjusted the rear of the canopy bow ONE last time, I hope to 5/8” above the rail. Cleaned up the shop. Need to setup some saw horses and prepare to start cutting plexi.
