Shot primer on right flap brace, hinge and spar/skin area. While primer was drying, I mostly shoveled snow—no, I did not count as build time! After primer was dry, I clecoed all the parts together. Pulled the 3 cherrymax rivets on the inboard end, then pulled the MSP-41’s along the flap brace almost to the outboard end. There is access on the outboard end of the brace to drive the AN470’s with a gun. Next, I used the squeezer to rivet the skin, brace and hinge together. Have the 5 or 6 AN470’s to shoot and the right flap install is complete.