KitLog pro

Powered By Kitlog Pro v2.0

Michaels Web Site
' style=
Date:  4-14-2013
Number of Hours:  2.00
Manual Reference:  
Brief Description:  Lower baffle seals

Worked on the lower baffles tonight.

- Trimmed-to-fit all the lower baffle strips (the ones that hold the baffle seals in place).

- Clamped the strips in place and drilled throug the baffles and baffle strips.

- Cut a continuous flexible baffle seal for across most of the left side of the lower baffle.

- Held the baffle seals in place with my fingers or pressed between the baffles and my workbench, and drilled each hole in turn.

- I made little square aluminum cleco "washers" (photo 2) to hold the baffle in place as I moved along the baffle.
' style=

Continuous seal across most of the left side of the lower baffle.

Continuous seal across most of the left side of the lower baffle.

' style=

To drill through the seal, and hold it in place, I made temporary cleco

To drill through the seal, and hold it in place, I made temporary cleco "washers".

' style=










Copyright © 2001-2019 Matronics. All Rights Reserved.