Michael Smith - Experimental Aircraft Builder's Log

Michaels Web Site


Date: 9-9-2023
Number of Hours: 2.00
Manual Reference:
Brief Description: Stall warning & cleco leading edge

Had to remove the stall warning assembly and make adjustments. It was too close to the far edge of the wing skin cutout. Then did the wiring for the stall warning. Added a grommet for strain relief. Reinstalled the leading edge on the wing spar, and ran the stall warning wire through the grommet in the wing spar. Ready to start riveting.

Wires installed on the stall warning assembly

Leading edge back on the wing

Stall warning wire through grommet in spar

< Previous Log Entry Next Log Entry >