KitLog pro

Powered By Kitlog Pro v2.0

Leos Web Site
' style=
Date:  5-10-2018
Number of Hours:  11.00
Manual Reference:  
Brief Description:  Left wing tip trim drill and lens trim

I trimmed the left-wing tip fiberglass to fit and drilled to the wing skin.

I then trimmed the wing tip lens to fit and installed the nut plates to hold it in place.

I then installed the 42 nut plates in the edge of the wing tips and drilled and dimpled the holes on the wing skin.

I installed the Aero LED wing tip strobe and position light kit. In my enthusiasm I purchased and assembled the kit very early in my construction. The kit has been sitting and gathering dust for several years. Good to be installing them finally. I changed the jumper wires between the two boards to connectors as the planned jumper wires were very difficult to install. I spend a lot of thought on what is best for maintenance in the future taking extra time if needed.

Next, I installed the Archer VOR antenna in the wing tip. I should learn to read instructions first as the installation required drilling out 5 nut plates, match drilled and reinstalled.

I installed the wiring for the wing tip light and antenna
' style=

Left wing tip with lense fitted

Left wing tip with lense fitted

' style=










Copyright © 2001-2024 Matronics. All Rights Reserved.