KitLog pro

Powered By Kitlog Pro v2.0

Bobs Ten
' style=
Date:  5-14-2016
Number of Hours:  3.20
Manual Reference:  
Brief Description:  Install Static Source Plumbing

1300 - 1336 1436 - 1712

Remove elevator pushrod.

Secure pushrod jam nuts with loctite and tighten, 4x.

Remove battery tray.

Vacuum and clean dust from tailcone area.

Install Static source plumbing using Safe Air 1 fittings.

Insert Kyle into fuselage! This would have taken me five times longer if I had to get in the tailcone. Thanks Kyle!

Install 90 degree pipe thread to push fitting in each static port.

Fabricate mounting bracket for static source Tee from 6061 angle.

Match drill bracket to bulkhead.

Debur holes.

Rivet bracket using LP4-3 rivets.

Install Tee fitting on bracket.

Fabricate two static lines to run from Tee to static ports.

Install lines.

Locate and mount Adel clamps to support lines.

Determine location of main static line.

Locate and install Adel clamps and snap bushings to support line.

Remove Kyle from fuselage!
' style=





' style=




' style=




' style=










Copyright © 2001-2024 Matronics. All Rights Reserved.