Installed both wings wiring as per AEROLEDs drawing/supplied wiring.
Nav/Pos/Strob - TWP & Shielded: 20 AWG Pin 1 - Red Pin 2 - Yellow Pin 3 - Green Pin 4 - Black
Landing/Taxi Lights - TWP & Shielded: 18 AWG Pin 1 - Red Pin 2 - Black Pin 5 - Yellow
20 AWG Pin 3 - Green Pin 4 - Blue
Ground wires are run to Molex connector, not airframe. This is to provide noise isolation by avoiding high currents in airframe and to avoid high resistance points in the power path.
