KitLog pro

Powered By Kitlog Pro v2.0

Terry Wighs
Work Logs Found: 187
Category Work Time: 429 Hours
 Date
Hours
Work Log Summary

Details

 09-13-2014
1.50
Painted Acyglow Yellow
Details
       

 02-15-2013
16.00
Several sessions of riveting bottom skins on wings
Details
     

 01-20-2013
1.00
Rivet Stall Warning Stiffener Plate / assembly
     

 01-19-2013
4.00
Riveted Winglets, and platenuts to Fiberglass Tips
       

 01-18-2013
2.00
Sand, prime paint Wing tip parts & Stall Warning K
     

 01-04-2013
2.00
Counter Sunk Fiberglass holes Wing tips
     

 01-01-2013
2.00
Drilled out platenut holes Left Wingtip

 12-30-2012
2.00
Drilled out Right Wing Tip Platenut holes
       

 12-24-2012
1.00
Drilled 2 strips Aluminum backing Right Wing Tip
Details
     

 12-22-2012
1.00
Drilled 2 strips Aluminum backing Left Wing Tip

 12-16-2012
2.00
Fit, Cut, drilled, deburred Winglets
     

 12-15-2012
3.00
Fit, cut, drilled out Right Fiberglass Wing Tip
       

 12-08-2012
3.50
Fit, cut, drilled out Left Fiberglass Wing Tip
       

 12-02-2012
1.00
Prep. countersink, deburr remaining Stall kit part
     

 11-29-2012
1.00
Access panel drilling for Stall Warning Kit
Details
     

 11-28-2012
1.50
Cut access hole in leading edge of Wing
Details

 11-27-2012
1.00
Template / Retro Stall Warning Kit Installation
     

 03-25-2010
2.00
Riveted left bottom skins (inboard walk bays)

 03-22-2010
2.00
Riveted right bottom wing skin
Details
     

 08-15-2009
0.50
Transferred Wings to Wing Craddle for Storage
Details
       

 08-08-2009
2.00
Mount Left Fuel Tank on Wing
Details
       

 08-04-2009
2.00
Left Fuel Tank Finished and Tested
Details
       

 07-31-2009
3.00
Proseal/Rivet Left Fuel Tank Baffle

 07-26-2009
3.00
Proseal Touchup, and Tape-Off for Baffle work
       

 07-25-2009
6.00
Proseal/Rivet Left Fuel Tank Ribs # 1,7
Details
       

 07-22-2009
2.50
Proseal/Rivet Left Fuel Tank Ribs # 5,6

 07-21-2009
4.00
Proseal/Rivet Left Fuel Tank Ribs # 2,3,4
     

 05-07-2009
2.00
Fabricated Flap Hinge Pin Tie-Downs
Details
     

 05-06-2009
0.50
Mounted Ailerons and Fabricated Spacers
Details
       

 05-05-2009
0.25
Checked Aileron Trailing Edge Radius
       

 05-04-2009
2.00
Mount Flaps for Hinge Drilling and Placement
       

 05-03-2009
1.00
Rivet Flap Braces to Rear Wing Spars
       

 04-25-2009
2.00
Rivet Aileron Brackets and Gap Seals
       

 04-23-2009
2.00
Fabricate Flap Hinges and Countersink
     

 04-20-2009
0.50
Prime Paint Flap Braces
Details
       

 04-14-2009
1.50
Alumi-Prep/Alodine Aileron Brackets and Gap Seals
       

 04-13-2009
1.50
Aileron Brackets
Details
     

 04-12-2009
2.00
Aileron Gap Seal and Flap Bracket Drilled Out
Details
       

 04-09-2009
1.00
Aileron Brackets/Hinges
     

 02-22-2009
1.50
Wing Position Light Lens Covers
Details
       

 02-09-2009
0.50
Contour/File Left Bottom Wing Skin Lap Joint

 02-06-2009
0.50
Contour/File Right Bottom Wing Skin Lap Joint

 01-28-2009
2.00
Right Fuel Tank Leak Testing/Manometer Method
Details
       

 01-27-2009
1.00
Bellcrank/Linkage
Details
     

 01-16-2009
2.00
Finished Riveting Left Aileron
Details
       

 01-14-2009
1.50
Re-do Right Aileron Bottom Skin Rivets
Details

 01-13-2009
2.50
Finished Riveting Right Aileron/Checked tailing ed
     

 01-08-2009
1.00
Prime Paint Main Aileron Control Pushrods
     

 01-05-2009
1.50
Mounted Right Fuel Tank on Wing
Details
       

 01-04-2009
3.00
Left Fuel Tank Construction Begins
Details

 01-03-2009
1.00
Alumi-Prep/Alodine Control Pushrods
     

 01-02-2009
1.00
Right Fuel Tank Leak Test
Details

 12-27-2008
1.00
Finished Aileron Control Pushrods
       

 12-23-2008
1.00
Continued Aileron Control Pushrods

 12-01-2008
3.00
Riveting on Right Flap
       

 11-17-2008
2.00
Aileron pipe counter wt work and Float senders
Details

 11-14-2008
1.00
Rt. Fuel Tank Vent Line Fitted
       

 11-12-2008
1.00
Install Bellcranks/Ream bushing
       

 11-10-2008
2.00
Prime Aileron Infrastructure

 11-05-2008
1.00
Alumi-prep/Alodine Aileron Infrastructure
     

 10-30-2008
2.00
Rivet Flap Plates and Flap Platenuts
       

 10-29-2008
2.00
Installed Platenuts Left Bottom Wing
Details

 10-28-2008
2.00
Rivet Left Bottom Skin to Aft Ribs Flaps
     

 10-27-2008
2.00
Flap Work/Angle Piece Drilled and Deburred

 10-26-2008
1.00
Rivet Main Spar/Flange Repairs
Details
       

 10-25-2008
4.00
Aileron Work
Details
       

 10-19-2008
3.00
Deburr/Dimple Left Wing Skin

 10-18-2008
3.00
Finish Drilling Out Ailerons/counter wt. pipe

 10-17-2008
2.00
Assemble/Drill Out Ailerons and Pipe
Details
     

 10-16-2008
2.00
Fabricate and proseal/rivet plates on outboard Rt.
Details
       

 10-15-2008
3.00
Aileron Brake Work
Details

 10-14-2008
2.00
Deburr/Dimple Rt. Bottom Wing Skins

 10-13-2008
2.00
Rivet Stiffeners on Ailerons
       

 10-11-2008
2.00
Prime Paint Flap/Aileron Parts

 10-10-2008
2.00
Alumi-Prep/Alodine parts
Details

 10-05-2008
6.00
Flaps/Aileron work
Details
       

 10-04-2008
3.00
Proseal/Rivet 3 Ribs in Rt. Fuel Tank

 09-30-2008
2.00
Drilled out F706A part to Inboard Ribs

 09-29-2008
1.00
Finished Fabrication of F706A Rt/Left Parts

 09-28-2008
2.00
Counter Sink Flap Spars/Fabricate FL706A angles

 09-26-2008
1.00
Dimple Left Flap Skins
     

 09-25-2008
1.00
Dimple Rt Flap Ribs/Left Flap Ribs
Details
       

 09-24-2008
1.00
Dimple Rt. Flap Skin/Ribs
     

 09-22-2008
1.00
Dimple Aileron Skins/spars
       

 09-21-2008
1.00
Dimple Aileron Stiffeners
       

 09-20-2008
2.00
Deburred Edges/Finish work Aileron Stiffeners/Dril
     

 09-20-2008
1.00
Deburred Aileron Skins
Details
       

 09-18-2008
1.00
Cutting Aileron Stiffeners

 09-16-2008
0.50
Re-Do Landing Light Attachment Screw Holes
Details

 09-15-2008
4.00
Right Fuel Tank/First Two Ribs Prosealed and Rivet
       

 09-14-2008
2.00
Drilled Out Left Flap/Deburred/Fuel Tank Work
Details

 09-13-2008
2.00
Drilled out Right Flap and Deburred
     

 09-11-2008
1.00
Drill Out Flap Skins and Hinges
       

 09-09-2008
2.00
Fabricate Shims for Flap Ribs to Tailing Edge Skin
     

 09-08-2008
1.00
Flaps/Ribs/Spar Clecoed and Drilled Out
     

 09-07-2008
1.00
Right Fuel Drain Riveting/Proseal
       

 09-06-2008
2.00
Proseal/Rivet Rt. Fuel Tank Filler Hole
       

 09-04-2008
2.00
Rivet Tank Stiffeners/Proseal work
     

 08-31-2008
2.00
Finished Right Top Wing Skin Riveting
       

 08-30-2008
2.50
Finished Top Left Wing Skin Riveting/Started Right
       

 08-24-2008
3.00
Scuff Internal Tank Skin/Rivet Top Skin to Spar
Details

 08-22-2008
1.00
Pop Rivet Leading Edge Ribs to Main Spar

 08-19-2008
2.50
Dimple Left Tank Skin/Tape off Tank Stiffeners
Details
       

 08-17-2008
4.00
Dimple Tank Stiffeners/Ribs/Skin and deburr
       

 08-16-2008
2.00
Deburr Tank Stiffeners and Ribs

 08-14-2008
3.00
Dimple and Deburr Rt. Wing Top Skins

 08-12-2008
4.00
Dimple Top Left Wiing Skins
       

 08-11-2008
2.00
Wing skin dimpling/attached skin to ribs/spars
       

 08-11-2008
1.50
Riveted leading edge to main spar
Details
       

 08-10-2008
10.00
Finish Landing lights/skin work/leading edge
Details
       

 08-09-2008
4.50
Finish rivets leading edges/skin work
Details
     

 08-08-2008
1.50
Main spar holes primed
Details
     

 08-08-2008
2.00
Continue work on landing lights
     

 08-07-2008
1.00
Further work on landing lights
Details
     

 08-04-2008
2.00
Left landing light cut hole and finished surface

 08-03-2008
2.00
Started Duckworks landing light right wing
Details
       

 08-02-2008
2.00
Rivet leading edges
Details

 07-30-2008
2.00
deburr and dimple left ribs
Details

 07-25-2008
6.00
Leading edge work, and rear spar work
Details
       

 07-24-2008
4.00
deburr and dimple leading edges and ribs
Details

 07-20-2008
4.00
Alumiprep and alodine joint plates/Z-Brackets atta
Details
       

 07-19-2008
1.00
Finished removing protective plastic from skins
Details
     

 07-17-2008
3.00
Removing protective plastic from skins with solder
     

 07-15-2008
2.00
Dimple/countersink/deburr joint plates
     

 07-13-2008
6.00
Fuel Tank Flap/Trap doors and Access Plate
Details
       

 07-13-2008
1.00
Finished up Fuel tank access plates on inboard rib
       

 07-12-2008
4.00
Worked on Nutplates on Joint Plates, deburred.
Details
       

 07-08-2008
1.00
Drilled T-708/T-411 Rings/Plates for Tank Access P
Details
       

 07-04-2008
2.00
Fabricate C-Frame Table.
Details
       

 06-28-2008
3.00
Finish Left and Right Fuel Tank Attacment Angles..
Details
       

 06-27-2008
2.00
Disassemble and Label Left and Right Tank parts
Details
     

 06-24-2008
2.00
Countersink Right Fuel Tank skin to baffle attachm
Details

 06-23-2008
3.50
Countersink Left Fuel Tank Skin to Baffle attachme
Details
       

 06-19-2008
1.50
Final drill Left Fuel Tank
       

 06-16-2008
3.00
Z-Brackets for Right fuel tank started
Details
       

 06-15-2008
1.50
Left fuel tank/Right Z-brackets
Details
       

 06-15-2008
6.00
Left fuel tank baffle/ribs/joint plate final drill
Details
       

 06-13-2008
1.50
Finished left Z-Bracket drilling/left fuel baffle

 06-06-2008
2.50
Fabricate fuel tank stiffeners/final drill to tank
       

 06-05-2008
2.00
Measured and drilled Z-Brackets for fuel tanks
       

 06-02-2008
5.00
Right wing skins/leading edge/joint plate
Details

 05-29-2008
3.00
Left wing edge joint plate, started drilling out r
Details
       

 05-26-2008
1.50
Finsih dirll out left leading edge/fabricate right
       

 05-25-2008
4.00
Drill out left top and bottom skins/and leading ed
Details
       

 05-23-2008
1.50
Riveted Right ribs to main spar and rear spar
       

 05-19-2008
1.00
Clecoed Right ribs to main spar and rear spar

 05-18-2008
1.00
6 Right ribs painted with primer
Details
     

 05-17-2008
2.00
8 Right ribs painted with primer

 05-16-2008
3.00
Right fuel tank ribs/Z-Brackets/tank skin
     

 05-16-2008
3.00
Right Fuel Tank
Details
       

 05-16-2008
3.00
Drilled right fuel tank ribs/Z-Brackets/baffle/joi

 05-16-2008
2.50
Built leading edge and fuel tank craddles
Details

 05-16-2008
3.00


 05-13-2008
3.00
Leading edge ribs squared and fluted

 05-12-2008
1.50
Fabricated wing doubler/clecoed inboard top skin
Details
     

 05-10-2008
2.00
Mount Left Wing to Wing stand/plumb/level
Details
       

 05-10-2008
2.00
Clecoed skin on bottom of left wing and outboard t
       

 05-10-2008
5.00
Alumi-Prep/alodine right ribs

 05-02-2008
3.00
Riveting Left main spar/ribs/and rear spar
Details
       

 04-30-2008
1.00
Riveting Ribs to left main spar
       

 04-30-2008
0.00
Riveting Ribs to left main spar
       

 04-21-2008
4.00
Alodine treating of ribs/primer painting
       

 04-19-2008
5.00
Alumi-Prep/Alodine Left ribs
       

 04-16-2008
3.00
Drilled out ribs/with spars
Details
       

 04-14-2008
1.00
Finished bending flanges on ribs/squaring/flutiing
Details
       

 04-14-2008
1.00
Bending rib flanges/squaring/fluting finished
Details
       

 04-13-2008
2.50
Bending flanges/squaring/and fluting of ribs
       

 04-11-2008
0.00
Eye bolt fitting completed
       

 04-11-2008
2.50
Deburr ribs/tap both tie down brackets
Details
       

 03-26-2008
3.00
Drilling out spars/ribs
Details
       

 03-25-2008
0.50
Assemble ribs/main & rear spar for drilling
       

 03-24-2008
2.00
Drill pilot holes then unibit holes for conduit
       

 03-24-2008
0.50
Build jig for drilling conduit hole
       

 03-22-2008
2.00
Deburr rib edges/lightening holes

 03-18-2008
1.00
Deburr rib edges/lightening holes
       

 03-17-2008
2.50
Rivet rear spar reinforcement fork and plates
       

 03-16-2008
2.50
Rivet nut plates on and bolt tie downs to rear spa
     

 03-16-2008
2.00
Cleco rear spar/tape rivet call out
       

 03-15-2008
1.00
Prime paint alodined parts/rear spar
     

 03-13-2008
1.50
Tie down/rear spar components
Details
       

 03-13-2008
1.00
Aluminum-Prep/Alodine Rear spar/reinforcement plat
       

 03-02-2008
6.00
Rear wing spar preparation
Details
       

 02-24-2008
1.00
Finished wing tie down brackets
Details
       

 02-22-2008
3.00
Wing tie downs
Details
       

 02-20-2008
3.00
Access Plates
Details
       

 02-11-2008
15.00
Countersinking main wing spars
       

 02-06-2008
0.25
Wing Kit Arrives
Details
       










Copyright © 2001-2018 Matronics. All Rights Reserved.