Ed Lynn - Experimental Aircraft Builder's Log

Eds Vans RV-7A Web Site

20 Logs Found

Date	Hours	Work Log Summary	Details
12-10-2009	0.0	Prep and prime flap actuator cover parts.	Details


12-09-2009	0.0	Drill for platenuts on the flap backrest brace.	Details


12-08-2009	0.0	Misc flap actuator cover fabrication.	Details


12-07-2009	0.0	Rercess bolt in flap actuator channel.	Details


11-17-2009	0.0	Drill flap center bearing block.	Details


11-16-2009	0.0	Straighten WD-613 Flap Actuator Weldment.	Details


11-15-2009	0.0	9. Trim F-767 Attch Bracket to length.	Details


11-15-2009	0.0	8. Fabricate and drill F-767 Attach Plate.	Details


11-15-2009	0.0	7. Drill top of F-785A Backrest Brace.	Details


11-15-2009	0.0	6. Drill bottom of 785A Backrest Brace.	Details


11-15-2009	0.0	5. Fabricate flap actuator housing F-785B	Details


11-15-2009	0.0	4. Flap bearing block attach hole location is bad.	Details


11-15-2009	0.0	3. Fabricate flap center bearing block.	Details


11-15-2009	0.0	2. Mark up flap center bearing block F-680.	Details


11-15-2009	0.0	14. Fabricate spacer and fit Flap Actuator.	Details


11-15-2009	0.0	13. Match Drill 3 holes in F-766B through Channel.	Details


11-15-2009	0.0	12. Match Drill hole in F-766B Angle.	Details


11-15-2009	0.0	11. Match drill center hole in F-766C Plate.	Details


11-15-2009	0.0	10. Match Drill Actuator Channel through F-766C.	Details


11-15-2009	0.0	1. Fabricate flap actuator F-766B.	Details