Powered By Kitlog Pro v2.0
Eds Vans RV-7A Web Site
RV-7A
Empennage
63 Logs Found
Date
Hours
Work Log Summary
Details
01-11-2008
0.0
Open those wing boxes.
Details
01-10-2008
0.0
Picture inside the vertical stabalizer.
Details
01-10-2008
0.0
Fit the rudder to vertical stabalizer.
Details
01-09-2008
0.0
Rolling elevator leading edge continued.
Details
01-08-2008
0.0
Rolling leading edge of elevators.
Details
01-07-2008
0.0
Rolling Rudder Leading Edge
Details
12-27-2007
0.0
Drill and rivet on the elevator trim tab.
Details
12-26-2007
0.0
Time to close the elevator skins.
Details
12-26-2007
0.0
Elevators ready to be riveted.
Details
12-13-2007
0.0
Prime elevator trim tab parts
Details
12-12-2007
0.0
Clamp doen the elevator trim tab.
Details
12-12-2007
0.0
Bend the elevator trim tab.
Details
12-10-2007
0.0
Time to smack on the elevator tim tabs.
Details
12-09-2007
0.0
Becning those left elevator tabs.
Details
12-08-2007
0.0
House I almost bought.
Details
12-07-2007
0.0
More elevator sleleton riveting.
Details
12-05-2007
0.0
Lets rivet the elevator skeleton
Details
12-04-2007
0.0
Primed left elevator parts.
Details
12-03-2007
0.0
Counter sink elevator parts
Details
12-02-2007
0.0
Left elevator holes drilled
Details
11-02-2007
0.0
Bending the elevator trailing edge.
Details
11-01-2007
0.0
Cleco elevator counter weight housing.
Details
10-19-2007
0.0
Prime stiffeners, rivet nutplates to trim access.
Details
10-18-2007
0.0
Drill elevator stiffeners.
Details
10-17-2007
0.0
Process the elevator trim access plate.
Details
10-16-2007
0.0
Dimple elevator stiffeners.
Details
10-14-2007
0.0
Continue with elevator stiffeners.
Details
10-12-2007
0.0
Finish the elevator stiffeners.
Details
10-11-2007
0.0
Elevator stiffeners.
Details
10-10-2007
0.0
Setting the remaing rudder edge rivets.
Details
10-09-2007
0.0
Rudder control hord and counter weight.
Details
10-08-2007
0.0
Prepare rudder edge rivets holes.
Details
10-07-2007
0.0
Rudder skeleton.
Details
10-06-2007
0.0
Cleaco every other hole, then drill.
Details
10-05-2007
0.0
Makeing rudder stiffeners.
Details
10-04-2007
0.0
Some bad rivets on the VS Rear Spar lower hinge.
Details
10-03-2007
0.0
Riveting up the VS skin.
Details
10-02-2007
0.0
Final assembly of the VS Skeleton
Details
10-01-2007
0.0
Priming the Vertical Stabalizer, VS
Details
09-25-2007
0.0
Skin is on and all skin holes final drilled.
Details
09-24-2007
0.0
The start of the VS vertical stabalizer.
Details
09-24-2007
0.0
Comleted the HS.
Details
09-23-2007
0.0
All HS rivets bucked.
Details
09-11-2007
0.0
Clecoed the left skin back on.
Details
09-10-2007
0.0
HS Skeleton taking shape
Details
09-05-2007
0.0
HS front spar riveted.
Details
09-04-2007
0.0
Finally, a completed sub assembly. HS Rear Spar
Details
09-03-2007
0.0
Primed the HS parts
Details
09-02-2007
0.0
HS degreased and laid out for priming.
Details
09-01-2007
0.0
I make a bunch of part paint hangers.
Details
08-31-2007
0.0
Mindy now dimples the HS spars.
Details
08-30-2007
0.0
Mindy has fun dimpling.
Details
08-29-2007
0.0
Another prep step on skeleton, debur and polish.
Details
08-28-2007
0.0
All HS holes are drilled. Clecoed every other hole
Details
08-27-2007
0.0
Right side of HS clecoed together.
Details
08-27-2007
0.0
Finally looks like an airplane part.
Details
08-22-2007
0.0
Romeve protective plastic at rivet locations.
Details
08-21-2007
0.0
Making of the Hor. Stab. skin sqeezers.
Details
08-20-2007
0.0
Horizontal Stabalizer work jig.
Details
08-19-2007
0.0
Horizontal stabalizer front spar channels.
Details
08-18-2007
0.0
Horizontal stabalizer front spar supports.
Details
08-17-2007
0.0
Rear main spar of the Horizontal Stabalizer.
Details
08-16-2007
0.0
Empennage unpacked and shelved.
Details
SITE NAVIGATION
Contact Builder
RV-7A Home
All
Empennage
Finish Kit
Finishing Kit
Flap Actuator
Fuselage
Hole Fixing
Miscellaneous
Personel
Roll Bar
Seat Back
Shop
Tools
Wing Cradle
Wing Hardware
Wing Jig
Wings
Copyright © 2001-2013 Matronics. All Rights Reserved.
