Date
|
Hours
|
Work Log Summary
|
Details
|
01-21-2015
|
0.00
|
The Canopy Big Cut 3.
|
Details
|
|
|
01-20-2015
|
0.00
|
The Canopy Big Cut 2.
|
Details
|
|
|
01-19-2015
|
0.00
|
The Canopy Big Cut 1.
|
Details
|
|
|
01-18-2015
|
0.00
|
Forward canopy trimming 5.
|
Details
|
|
|
01-17-2015
|
0.00
|
Forward canopy trimming 4.
|
Details
|
|
|
01-16-2015
|
0.00
|
Forward canopy trimming 3.
|
Details
|
|
|
01-15-2015
|
0.00
|
Forward canopy trimming 2.
|
Details
|
|
|
01-14-2015
|
0.00
|
Forward canopy trimming 1
|
Details
|
|
|
01-13-2015
|
0.00
|
Canopy shaping tools
|
Details
|
|
|
01-12-2015
|
0.00
|
Second trim canopy sides
|
Details
|
|
|
01-11-2015
|
0.00
|
First trim for/aft canopy
|
Details
|
|
|
01-10-2015
|
0.00
|
The canopy
|
Details
|
|
|
01-09-2015
|
0.00
|
Canopy Frame Debur/Counter Sink 5
|
Details
|
|
|
01-08-2015
|
0.00
|
Canopy Frame Debur/Counter Sink 4
|
Details
|
|
|
01-07-2015
|
0.00
|
Canopy Frame Debur/Counter Sink 3
|
Details
|
|
|
01-06-2015
|
0.00
|
Canopy Frame Debur/Counter Sink 2
|
Details
|
|
|
01-05-2015
|
0.00
|
Canopy Frame Debur/Counter Sink 1
|
Details
|
|
|
01-04-2015
|
0.00
|
Drill Canopy Frame Forward Skin Wings
|
Details
|
|
|
01-03-2015
|
0.00
|
Canopy Frame Wedge
|
Details
|
|
|
01-02-2015
|
0.00
|
Canopy Frame Anti Movement Bolt
|
Details
|
|
|
01-01-2015
|
0.00
|
Canopy Frame Enforcement Drilling
|
Details
|
|
|
08-15-2013
|
0.00
|
Milling machine
|
Details
|
|
|
08-14-2013
|
0.00
|
Milling machine
|
Details
|
|
|
08-13-2013
|
0.00
|
Canopy Reinf. Drill F-7128C's to Canopy Frame.
|
Details
|
|
|
08-12-2013
|
0.00
|
Canopy Reinf. Complete Fabrication of F-7128C's
|
Details
|
|
|
08-11-2013
|
0.00
|
Canopy Reinf. Fabricate F-7128C Clasp's
|
Details
|
|
|
08-10-2013
|
0.00
|
Canopy Reinf. Fabricate F-7128C Clasp's
|
Details
|
|
|
08-09-2013
|
0.00
|
Canopy Reinf. More drilling and fitting.
|
Details
|
|
|
08-08-2013
|
0.00
|
Canopy Reinf. Trial fit and drill forward edge.
|
Details
|
|
|
08-07-2013
|
0.00
|
Canopy Reinf. Bend straight flanges.
|
Details
|
|
|
08-06-2013
|
0.00
|
Canopy Reinf. Circular Reinforcement Flanges.
|
Details
|
|
|
08-05-2013
|
0.00
|
Canopy Reinf. Fabricate Stiffening Flange Tool.
|
Details
|
|
|
08-04-2013
|
0.00
|
Canopy Reinf. Canopy Reinforcement Kit.
|
Details
|
|
|
08-03-2013
|
0.00
|
Riveting for/aft canopy decks.
|
Details
|
|
|
08-02-2013
|
0.00
|
Riveting the F-705's.
|
Details
|
|
|
08-01-2013
|
0.00
|
Adjust notch of F-705's for pop rivets.
|
Details
|
|
|
05-28-2013
|
0.00
|
Drill Forward Ball Stud Mounts to Fuselage.
|
Details
|
|
|
05-27-2013
|
0.00
|
Make Plate Nut Plate, mount Aft Ball Stud Mounts
|
Details
|
|
|
05-26-2013
|
0.00
|
Drill Aft Ball Stud Mounts To F-721 Canopy Deck.
|
Details
|
|
|
05-25-2013
|
0.00
|
Fabricate Forward Lift Strut, Ball Stud Mounts. 2.
|
Details
|
|
|
05-24-2013
|
0.00
|
Fabricate Forward Lift Strut, Ball Stud Mounts. 1.
|
Details
|
|
|
05-23-2013
|
0.00
|
Finish Fabrication of Aft Ball Stud Mounts.
|
Details
|
|
|
05-22-2013
|
0.00
|
Fabricate Aft Lift Stru,t Ball Stud Mount.
|
Details
|
|
|
05-21-2013
|
0.00
|
Adjust curve of Wd-725 Canopy Side Frame.
|
Details
|
|
|
05-20-2013
|
0.00
|
Rivet C-613 Splice plate to Wd-725 side frame.
|
Details
|
|
|
05-19-2013
|
0.00
|
Drill C-613 Side Splice Plates to Wd-725's.
|
Details
|
|
|
05-18-2013
|
0.00
|
Dtrill Wd-725 Aft Canopy Frame Side Angles.
|
Details
|
|
|
05-17-2013
|
0.00
|
Sand Aft Wd-725Canopy Side Frame Angle Flat.
|
Details
|
|
|
05-16-2013
|
0.00
|
Drill C-704 SPlice Plate to Aft Frame Channel.
|
Details
|
|
|
05-15-2013
|
0.00
|
Make the C-704 Aft Canopy Frame Splice Plate.
|
Details
|
|
|
05-14-2013
|
0.00
|
Shape Canopy Frame F-631A Channels.
|
Details
|
|
|
05-13-2013
|
0.00
|
Adjust Fuselage Seal Flange to Canopy Frame.
|
Details
|
|
|
05-12-2013
|
0.00
|
Enlarging the Canopy Frame Goose Neck to 3/8"
|
Details
|
|
|
05-11-2013
|
0.00
|
Finish drilling 1/4" holes through Goose Neck.
|
Details
|
|
|
05-10-2013
|
0.00
|
Initial drilling of the Canopy Frame Goose Neck.
|
Details
|
|
|
05-09-2013
|
0.00
|
Work Bench gets cluttered fast.
|
Details
|
|
|
05-08-2013
|
0.00
|
Drilling Canopy Frame Forward Arms
|
Details
|
|
|
05-07-2013
|
0.00
|
Drilling C-614 Split to Canopy Frame
|
Details
|
|
|
05-06-2013
|
0.00
|
Initial fit of C-614 Canopy Splice Plate.
|
Details
|
|
|
05-05-2013
|
0.00
|
Make C-614 Canopy Splice Plate.
|
Details
|
|
|
05-04-2013
|
0.00
|
Trim C-619 Canopy Hinge Block Spacers.
|
Details
|
|
|
05-03-2013
|
0.00
|
Result Wd-716 aft edge flange adjustment.
|
Details
|
|
|
05-02-2013
|
0.00
|
Remove material from Wd-716 aft edge flange.
|
Details
|
|
|
05-01-2013
|
0.00
|
Trial fit of forward Canopy Frame
|
Details
|
|
|
03-18-2013
|
0.00
|
Canopy Frame. Prep Canopy Frame Top Skin. 2
|
Details
|
|
|
03-17-2013
|
0.00
|
Canopy Frame. Prep Canopy Frame. 1
|
Details
|
|
|
03-10-2013
|
0.00
|
Install Steps. Prep and prime Steps. 10
|
Details
|
|
|
03-09-2013
|
0.00
|
Install Steps. Drill Step Anchor Block. 9
|
Details
|
|
|
03-08-2013
|
0.00
|
Install Steps. Step Plate rivet hole locations. 8
|
Details
|
|
|
03-07-2013
|
0.00
|
Install Steps. Drill remaining column of rivets. 7
|
Details
|
|
|
03-06-2013
|
0.00
|
Install Steps. Drill Step Plate to Fuselage. 6
|
Details
|
|
|
03-05-2013
|
0.00
|
Install Steps. Shape plate and cut off corner. 5
|
Details
|
|
|
03-04-2013
|
0.00
|
Install Steps. Mark and drill Step Plate Holes. 4
|
Details
|
|
|
03-03-2013
|
0.00
|
Install Steps. Mark and drill Step Plate Holes. 3
|
Details
|
|
|
03-02-2013
|
0.00
|
Install Steps. Adjust tube length. 2
|
Details
|
|
|
03-01-2013
|
0.00
|
Install Steps. Adjust tube length. 1
|
Details
|
|
|
02-19-2013
|
0.00
|
Bolt and tourqe the Seat Belt Anchors.
|
Details
|
|
|
02-18-2013
|
0.00
|
Rivet Top Rear Skin with Stephanie.
|
Details
|
|
|
02-17-2013
|
0.00
|
Rivet Rudder Pedal Center Support to Firewall.
|
Details
|
|
|
02-16-2013
|
0.00
|
Rivet the cool air vent bracket.
|
Details
|
|
|
02-15-2013
|
0.00
|
Canopy latch Mechanism. Final Assembly . 4
|
Details
|
|
|
02-14-2013
|
0.00
|
Canopy latch Mechanism. Prep Latch Angles. 3
|
Details
|
|
|
02-13-2013
|
0.00
|
Canopy latch Mechanism. Tap Push Rod. 2
|
Details
|
|
|
02-12-2013
|
0.00
|
Canopy latch Mechanism. Drill C-611 Blocks. 1
|
Details
|
|
|
02-11-2013
|
0.00
|
Canopy Latch Handle, Rivet Latch Angles. 8
|
Details
|
|
|
02-10-2013
|
0.00
|
Canopy Latch Handle, Install spring and wire. 7
|
Details
|
|
|
02-09-2013
|
0.00
|
Canopy Latch Handle, Drill angles throgh skin. 6
|
Details
|
|
|
02-08-2013
|
0.00
|
Canopy Latch Handle, File handle slots in skin. 5
|
Details
|
|
|
02-07-2013
|
0.00
|
Canopy Latch Handle, File handle slots in skin. 4
|
Details
|
|
|
02-06-2013
|
0.00
|
Canopy Latch Handle, Drill skin using angles, 3
|
Details
|
|
|
02-05-2013
|
0.00
|
Canopy Latch Handle, Mark Hole Locations. 2
|
Details
|
|
|
02-04-2013
|
0.00
|
Canopy Latch Handle, Prepare Handle, 1
|
Details
|
|
|
02-03-2013
|
0.00
|
Roller Cart Tool Box.
|
Details
|
|
|
02-02-2013
|
0.00
|
Drill Press is all assembled.
|
Details
|
|
|
02-01-2013
|
0.00
|
New full size drill press.
|
Details
|
|
|
12-10-2012
|
0.00
|
Good friends swapping a fuselage stand.
|
Details
|
|
|
12-09-2012
|
0.00
|
Canopy Release Handle mounted vertically.
|
Details
|
|
|
12-08-2012
|
0.00
|
Sub-Panel Complete and Installed in Fuselage.
|
Details
|
|
|
12-07-2012
|
0.00
|
Sub-Panel Revited.
|
Details
|
|
|
12-06-2012
|
0.00
|
Rivet Sub-Panel
|
Details
|
|
|
12-05-2012
|
0.00
|
Rivet Hat Channel/Seal Supports to Sub Panel.
|
Details
|
|
|
12-04-2012
|
0.00
|
Alternative Canopy Release Handle Position.
|
Details
|
|
|
12-03-2012
|
0.00
|
F-643-1 Channel Interference Modification. 2
|
Details
|
|
|
12-02-2012
|
0.00
|
F-643-1 Channel Interference Modification. 1
|
Details
|
|
|
12-01-2012
|
0.00
|
More F-679 Hat Channel Interference.
|
Details
|
|
|
11-30-2012
|
0.00
|
Drilling Canopy Release Shaft and Arm Together.
|
Details
|
|
|
11-29-2012
|
0.00
|
1/2" Hole instrument Panel for jettison Handle.
|
Details
|
|
|
11-28-2012
|
0.00
|
F-643-1 Channel Interference Modification.
|
Details
|
|
|
11-27-2012
|
0.00
|
Bearing Block and Hat Channel Modification.
|
Details
|
|
|
11-26-2012
|
0.00
|
Hinge Pin Interference bottoming out on Short Rib.
|
Details
|
|
|
11-25-2012
|
0.00
|
Dill holes in end of Canopy Release Links.
|
Details
|
|
|
11-24-2012
|
0.00
|
Canopy Release Bearing Block, Fabrication, 2
|
Details
|
|
|
11-23-2012
|
0.00
|
Canopy Release Bearing Block, Fabrication, 1
|
Details
|
|
|
11-22-2012
|
0.00
|
Cut Slots in Canopy Release Steel Links.
|
Details
|
|
|
11-21-2012
|
0.00
|
Remove Threads and Shape Canopy Hinge Pins.
|
Details
|
|
|
11-20-2012
|
0.00
|
Decrease Diameter of WD-619 Release Shaft.
|
Details
|
|
|
11-19-2012
|
0.00
|
Conopy Hinge, Fit Hinge Blocks
|
Details
|
|
|
11-18-2012
|
0.00
|
Canopy Hinge, Fit Hinge Blocks.
|
Details
|
|
|
11-17-2012
|
0.00
|
Canopy Hinge, Drill Hinge Blocks.
|
Details
|
|
|
11-16-2012
|
0.00
|
Canopy Latch, Fabricate C-619 Spacers.
|
Details
|
|
|
11-15-2012
|
0.00
|
Fresh Air vents, Attach to Fuselage.
|
Details
|
|
|
11-14-2012
|
0.00
|
Fresh Air Vents, Fit to Fuselage.
|
Details
|
|
|
11-13-2012
|
0.00
|
Fresh Air Vents, Fabricate Attach Angles.
|
Details
|
|
|
11-12-2012
|
0.00
|
Fresh Air Vents, Fit/Locate Attach Angles.
|
Details
|
|
|
11-11-2012
|
0.00
|
Service the Compress after hose blow
|
Details
|
|
|
11-10-2012
|
0.00
|
Compressor Blew a HOSE while not at home.
|
Details
|
|
|
11-09-2012
|
0.00
|
Install NACA vents. Shop head washer.Better Idea.
|
Details
|
|
|
11-08-2012
|
0.00
|
Install NACA vents. Shop head washer. BAD IDEA.
|
Details
|
|
|
11-07-2012
|
0.00
|
Install NACA vents. Counter sink vent. Dimple skin
|
Details
|
|
|
11-06-2012
|
0.00
|
Install NACA vents. Drill vents to fuselage.
|
Details
|
|
|
11-05-2012
|
0.00
|
Install NACA vents. Drill hole pattern in vents.
|
Details
|
|
|
11-04-2012
|
0.00
|
Install NACA vents. Locating and Fitting.
|
Details
|
|
|
11-03-2012
|
0.00
|
Glue bug screens in NACA vents.
|
Details
|
|
|
11-02-2012
|
0.00
|
Fit bug screens in NACA vents.
|
Details
|
|
|
11-01-2012
|
0.00
|
Instrument panel anchor point angles and nut-plate
|
Details
|
|
|
07-23-2012
|
0.00
|
Rivet F-703B and C to instrument panel.
|
Details
|
|
|
07-22-2012
|
0.00
|
Prime panel and sub panel parts.Part 2.
|
Details
|
|
|
07-21-2012
|
0.00
|
Prime panel and sub panel parts.
|
Details
|
|
|
07-20-2012
|
0.00
|
Dimple Forward Top Skin
|
Details
|
|
|
07-19-2012
|
0.00
|
Drill all remaining holes in forward top skin.
|
Details
|
|
|
07-18-2012
|
0.00
|
Finalize drilling F-721Cand D attach angles
|
Details
|
|
|
07-17-2012
|
0.00
|
Drilling F-721D Attach Angle to Canopy Deck
|
Details
|
|
|
07-16-2012
|
0.00
|
Drill F721C Attach Angle to canopy Deck
|
Details
|
|
|
07-15-2012
|
0.00
|
Drill F644 flange through top skin.
|
Details
|
|
|
07-14-2012
|
0.00
|
Drill F-643B angle to the firewall.
|
Details
|
|
|
07-13-2012
|
0.00
|
Prep forward top skin
|
Details
|
|
|
07-12-2012
|
0.00
|
Locate and drill F-743B Angle to F-643 Channel
|
Details
|
|
|
07-11-2012
|
0.00
|
Drill F-643 FWD Channel to Top Forward Skin
|
Details
|
|
|
07-10-2012
|
0.00
|
Mindy comes to help. Photo op first. Part 2
|
Details
|
|
|
07-09-2012
|
0.00
|
Mindy comes to help. Photo op first. Part 1
|
Details
|
|
|
07-08-2012
|
0.00
|
Fit and drill F-643 to F-768A Sub Panel.
|
Details
|
|
|
07-07-2012
|
0.00
|
Fit and drill F-644 sShort Ribs to F-768A Sub Pane
|
Details
|
|
|
07-06-2012
|
0.00
|
Fit and Drill F-768C Seal Support To F-768B
|
Details
|
|
|
07-05-2012
|
0.00
|
Drill F-768C Seal Angle To F-768A Sub-Panel
|
Details
|
|
|
07-04-2012
|
0.00
|
Fabricate F-644 Short Ribs Part 2
|
Details
|
|
|
07-03-2012
|
0.00
|
Fabricate F-644 Short Ribs Part 1
|
Details
|
|
|
07-02-2012
|
0.00
|
Frbricate F-703C Angle Part 2
|
Details
|
|
|
07-01-2012
|
0.00
|
Frbricate F-703C Angle Part1
|
Details
|
|
|
05-09-2012
|
0.00
|
Trim F-684 Channel.
|
Details
|
|
|
05-08-2012
|
0.00
|
Fab F-768D, Seal Supprt Angle, Part 4
|
Details
|
|
|
05-07-2012
|
0.00
|
Fab F-768D, Seal Supprt Angle, Part 3
|
Details
|
|
|
05-06-2012
|
0.00
|
Fab F-768D, Seal Supprt Angle, Part 2
|
Details
|
|
|
05-05-2012
|
0.00
|
Fab F-768D, Seal Supprt Angle, Part 1
|
Details
|
|
|
05-04-2012
|
0.00
|
Fab F-703B, Canopy Deck Angle, Part 4
|
Details
|
|
|
05-03-2012
|
0.00
|
Fab F-703B, Canopy Deck Angle, Part 3
|
Details
|
|
|
05-02-2012
|
0.00
|
Fab F-703B, Canopy Deck Angle, Part 2
|
Details
|
|
|
05-01-2012
|
0.00
|
Fab F-703B, Canopy Deck Angle, Part 1
|
Details
|
|
|
04-04-2012
|
0.00
|
Make fuselage rotisserie height adjustable.
|
Details
|
|
|
04-03-2012
|
0.00
|
Fuel vent. Glue screens to fitting ends.
|
Details
|
|
|
04-02-2012
|
0.00
|
Fuel Vent. Shape end to 45 degrees.
|
Details
|
|
|
04-01-2012
|
0.00
|
Fuel Vent Fittings, Gring off threads.
|
Details
|
|
|
01-07-2012
|
0.00
|
Rudder Cable Installed.
|
Details
|
|
|
01-06-2012
|
0.00
|
Wheel Axle Not Wrench
|
Details
|
|
|
01-05-2012
|
0.00
|
Internal Rudder Stop 5, Adjust contact surface.
|
Details
|
|
|
01-04-2012
|
0.00
|
Internal Rudder Stop 4, Cut it.
|
Details
|
|
|
01-03-2012
|
0.00
|
Internal Rudder Stop 3, Cut it.
|
Details
|
|
|
01-02-2012
|
0.00
|
Internal Rudder Stop 2, Cut it.
|
Details
|
|
|
01-01-2012
|
0.00
|
Internal Rudder Stop 1, Measure it.
|
Details
|
|
|
05-28-2011
|
0.00
|
Final mounting of rear VS to fuselage.
|
Details
|
|
|
05-27-2011
|
0.00
|
Debur and finally rivet the tie down bracket.
|
Details
|
|
|
05-26-2011
|
0.00
|
Enlarge 6 holes holding on the VS to 3/16.
|
Details
|
|
|
05-25-2011
|
0.00
|
Drill lower VS spar to fuselage.
|
Details
|
|
|
05-24-2011
|
0.00
|
Drill upper VS spar to elevator stop.
|
Details
|
|
|
05-23-2011
|
0.00
|
Clamp VS in place for drilling.
|
Details
|
|
|
05-22-2011
|
0.00
|
Locating vertical stabilizers lateral angle.
|
Details
|
|
|
05-21-2011
|
0.00
|
Locating vertical stabilizer vertically.
|
Details
|
|
|
05-20-2011
|
0.00
|
Result of drilling elevator stop.
|
Details
|
|
|
05-19-2011
|
0.00
|
Locate and drill F-712D Elevator up stop.
|
Details
|
|
|
05-18-2011
|
0.00
|
Drill tie down hole in fuselage.
|
Details
|
|
|
05-17-2011
|
0.00
|
Locate and drill 4 lower holes in Vertical Stabili
|
Details
|
|
|
05-16-2011
|
0.00
|
Vertical Stabilizer main spar missing rivets.
|
Details
|
|
|
05-15-2011
|
0.00
|
Abby graduates from middle school. Wow.
|
Details
|
|
|
05-14-2011
|
0.00
|
Fabricate F-712D up elevator stop. Part 2.
|
Details
|
|
|
05-13-2011
|
0.00
|
Fabricate F-712D up elevator stop. Part 1.
|
Details
|
|
|
05-12-2011
|
0.00
|
Adjust Vertical Stabilizer main spar flanges.
|
Details
|
|
|
05-11-2011
|
0.00
|
Trial fit of Vertical Stabilizer to fuselage.
|
Details
|
|
|
05-10-2011
|
0.00
|
Tim forward spar of vertical stabilizer.
|
Details
|
|
|
05-09-2011
|
0.00
|
Installed F-789 elevator push tube.
|
Details
|
|
|
05-08-2011
|
0.00
|
Installed a milling attachment to my lathe.
|
Details
|
|
|
05-07-2011
|
0.00
|
Adjust F-789 elevator push tube length.
|
Details
|
|
|
05-06-2011
|
0.00
|
Drill and rivet F-789 elevator push rod.
|
Details
|
|
|
05-05-2011
|
0.00
|
Assemble F-789 elevator pushrod.
|
Details
|
|
|
05-04-2011
|
0.00
|
Elevator trim, rivet anchor not.
|
Details
|
|
|
05-03-2011
|
0.00
|
Connect elevator trim tab cable at each end.
|
Details
|
|
|
05-02-2011
|
0.00
|
Elevator trim cable. Drill anchor nut plate.
|
Details
|
|
|
05-01-2011
|
0.00
|
Elevator trim cable. Mark anchor nut plate rivet h
|
Details
|
|
|
04-30-2011
|
0.00
|
Expand snap bushings, Route Trim cable.
|
Details
|
|
|
04-29-2011
|
0.00
|
Elevator trim cable. Drill more holes.
|
Details
|
|
|
04-28-2011
|
0.00
|
Elevator trim cable. Inspect and disassemble.
|
Details
|
|
|
04-27-2011
|
0.00
|
Elevator push tube. Install.
|
Details
|
|
|
04-26-2011
|
0.00
|
Elevator push tube. Prime and rivet.
|
Details
|
|
|
04-25-2011
|
0.00
|
Elevator push tube, Mark and Drill ends.
|
Details
|
|
|
04-24-2011
|
0.00
|
Make elevator push tube. Part 1.
|
Details
|
|
|
04-23-2011
|
0.00
|
Drill elevator push tube hole.
|
Details
|
|
|
04-22-2011
|
0.00
|
Drill HS aft spar to fuselage.
|
Details
|
|
|
04-21-2011
|
0.00
|
Set and check HS incidence. Angle of attack.
|
Details
|
|
|
04-20-2011
|
0.00
|
Drill forward HS spar to fuselage.
|
Details
|
|
|
04-19-2011
|
0.00
|
Drill hole locations on HS forward spar.
|
Details
|
|
|
04-18-2011
|
0.00
|
Match Drill HS spar angle through shim.
|
Details
|
|
|
04-16-2011
|
0.00
|
Mark hole locations on HS forward spar. 2
|
Details
|
|
|
04-15-2011
|
0.00
|
Mark hole locations on HS forward spar. 1
|
Details
|
|
|
04-14-2011
|
0.00
|
Drill holes on F-711C HS attach bar.
|
Details
|
|
|
04-13-2011
|
0.00
|
Mark hole loc on F-711C HS attach bar.
|
Details
|
|
|
04-12-2011
|
0.00
|
Mount HS for hole location marking, again.
|
Details
|
|
|
04-11-2011
|
0.00
|
Mount HS for hole location marking.
|
Details
|
|
|
04-10-2011
|
0.00
|
Make HS F798 Shims.
|
Details
|
|
|
04-09-2011
|
0.00
|
Drill elevator horns at push tube end.
|
Details
|
|
|
04-08-2011
|
0.00
|
Drill elevator horns at center bearing.
|
Details
|
|
|
04-07-2011
|
0.00
|
Make Elevator horn drill spacer block.
|
Details
|
|
|
04-06-2011
|
0.00
|
HS center bearing is not Perpendicular to spar.
|
Details
|
|
|
04-05-2011
|
0.00
|
Elevator horns not parallel.
|
Details
|
|
|
04-04-2011
|
0.00
|
Elevator horns totally out of wack.
|
Details
|
|
|
04-03-2011
|
0.00
|
Attach elevators to HS.
|
Details
|
|
|
04-02-2011
|
0.00
|
Adjust HS Rod End Bearing Lengths
|
Details
|
|
|
04-01-2011
|
0.00
|
Hinge Tool from Avery
|
Details
|
|
|
04-01-2011
|
0.00
|
Drilling AN3 Holes
|
Details
|
|
|
12-29-2010
|
0.00
|
Finished Roll Bar. Part 2.
|
Details
|
|
|
12-28-2010
|
0.00
|
Finished Roll Bar. Part 1.
|
Details
|
|
|
12-27-2010
|
0.00
|
Roll Bar - Fill hole in 631C/D angle bracket. Part
|
Details
|
|
|
12-26-2010
|
0.00
|
Roll Bar - Fill hole in 631C/D angle bracket. Part
|
Details
|
|
|
12-25-2010
|
0.00
|
Roll Bar - Fill hole in 631C/D angle bracket. Part
|
Details
|
|
|
12-24-2010
|
0.00
|
Hole Fixing - Extract rod and sand shape.
|
Details
|
|
|
12-23-2010
|
0.00
|
Hole Fixing - Fill ugly hole with epoxy.
|
Details
|
|
|
12-22-2010
|
0.00
|
Hole Fixing - Prepare sample ugly holes to repair.
|
Details
|
|
|
12-21-2010
|
0.00
|
Hole Fixing - Alum Fast Epoxy.
|
Details
|
|
|
12-20-2010
|
0.00
|
Hole Fixing - Devcon Fast Epoxy.
|
Details
|
|
|
12-19-2010
|
0.00
|
Mindy and I sit in the fuselage for the first time
|
Details
|
|
|
12-18-2010
|
0.00
|
Roll Bar - Seat Back interference with Roll Bar?.
|
Details
|
|
|
12-17-2010
|
0.00
|
Roll Bar - Seat Back interference with Roll Bar?.
|
Details
|
|
|
12-16-2010
|
0.00
|
Roll Bar - Drill roll bar to fuselage. Part 7.
|
Details
|
|
|
12-15-2010
|
0.00
|
Roll Bar - Drill roll bar to fuselage. Part 6.
|
Details
|
|
|
12-14-2010
|
0.00
|
Roll Bar - Drill roll bar to fuselage. Part 5.
|
Details
|
|
|
12-13-2010
|
0.00
|
Roll Bar - Drill roll bar to fuselage. Part 4.
|
Details
|
|
|
12-12-2010
|
0.00
|
Roll Bar - Drill roll bar to fuselage. Part 3.
|
Details
|
|
|
12-11-2010
|
0.00
|
Roll Bar - Drill roll bar to fuselage. Part 2.
|
Details
|
|
|
12-11-2010
|
0.00
|
Magnetic finger.
|
Details
|
|
|
12-10-2010
|
0.00
|
Roll Bar - Clamp roll bar in its final location.
|
Details
|
|
|
12-09-2010
|
0.00
|
Rolll Bar - Drill roll bar to fuselage. Part 1.
|
Details
|
|
|
12-08-2010
|
0.00
|
Roll Bar - Use thin shim under roll bar to get hei
|
Details
|
|
|
12-08-2010
|
0.00
|
Roll Bar - Check roll bar height before drilling.
|
Details
|
|
|
12-07-2010
|
0.00
|
Roll Bar - Shape 631C/D outer edge to match fusela
|
Details
|
|
|
12-06-2010
|
0.00
|
Roll Bar - Test roll bar width.
|
Details
|
|
|
12-05-2010
|
0.00
|
Roll Bar - Drill 631C/D's to fuselage.
|
Details
|
|
|
12-04-2010
|
0.00
|
Roll Bar - Prepare for drilling roll bar to fusela
|
Details
|
|
|
12-03-2010
|
0.00
|
Roll Bar - Locate roll bar for/aft.
|
Details
|
|
|
12-02-2010
|
0.00
|
Roll Bar - End of roll bar is not square.
|
Details
|
|
|
12-01-2010
|
0.00
|
Roll Bar - Pop rivet aft end of roll bar.
|
Details
|
|
|
11-17-2010
|
0.00
|
Roll Bar - Rivet for/aft roll bar splice plates.
|
Details
|
|
|
11-16-2010
|
0.00
|
Roll Bar - Rivet forward side of roll bar.
|
Details
|
|
|
11-15-2010
|
0.00
|
Roll Bar - Fabricate 632A bottom cover.
|
Details
|
|
|
11-14-2010
|
0.00
|
Roll Bar - Prime the rool bar.
|
Details
|
|
|
11-13-2010
|
0.00
|
Roll Bar - Drill forward holes in 632A channel.
|
Details
|
|
|
11-12-2010
|
0.00
|
Roll Bar - Drill aft end of 632A
|
Details
|
|
|
11-11-2010
|
0.00
|
Roll Bar - Trim 631C/D to fi tthe curve of fuselag
|
Details
|
|
|
11-10-2010
|
0.00
|
Roll Bar - Trim bottom for angle assembly. Part 2.
|
Details
|
|
|
11-09-2010
|
0.00
|
Roll Bar - Trim bottom for angle assembly.
|
Details
|
|
|
11-08-2010
|
0.00
|
Roll Bar - 705J/K/L buckhead interference. Crap.
|
Details
|
|
|
11-07-2010
|
0.00
|
Roll Bar - 705J/K/L buckhead interference. Crap.
|
Details
|
|
|
11-06-2010
|
0.00
|
Roll Bar - Rivet 631C/D keeper rivets.
|
Details
|
|
|
11-05-2010
|
0.00
|
Roll Bar - Drill 631C/D keep rivet holes.
|
Details
|
|
|
11-04-2010
|
0.00
|
Roll Bar - Pre drill 631C/D holes as per planes.
|
Details
|
|
|
11-03-2010
|
0.00
|
Roll Bar - Bend and drill the 732D angle part 2.
|
Details
|
|
|
11-02-2010
|
0.00
|
Roll Bar - Bend and drill the 732D angle.
|
Details
|
|
|
11-01-2010
|
0.00
|
Roll Bar - Cut bolt access holes in rear channel.
|
Details
|
|
|
09-16-2010
|
0.00
|
Roll Bar - Counter sink channel flanges.
|
Details
|
|
|
09-15-2010
|
0.00
|
Roll Bar - Locate and drill the top 631E joint pla
|
Details
|
|
|
09-14-2010
|
0.00
|
Roll Bar - Match drill straps to top channels.
|
Details
|
|
|
09-13-2010
|
0.00
|
Roll Bar - Finnish drilling straps to bottom chann
|
Details
|
|
|
09-12-2010
|
0.00
|
Roll Bar - Drill roll bar straps to bottom channel
|
Details
|
|
|
09-11-2010
|
0.00
|
Roll Bar - Bevel the 631B straps and locate.
|
Details
|
|
|
09-10-2010
|
0.00
|
Roll Bar - Locate top roll bar flange holes.
|
Details
|
|
|
09-09-2010
|
0.00
|
Roll Bar - Drill bottom roll bar channel holes.
|
Details
|
|
|
09-08-2010
|
0.00
|
Roll Bar - Mark hole locations in bottom flange.
|
Details
|
|
|
09-07-2010
|
0.00
|
Roll Bar - Drill 631E splice plate to roll bar cha
|
Details
|
|
|
09-06-2010
|
0.00
|
Roll Bar - Fabricate the 631E splice plate.
|
Details
|
|
|
09-05-2010
|
0.00
|
Roll Bar - Flatten roll bar channel flanges.
|
Details
|
|
|
09-04-2010
|
0.00
|
Roll Bar - Trim the top channels to match to botto
|
Details
|
|
|
09-03-2010
|
0.00
|
Roll Bar - Flatten the bottom of roll bar channel
|
Details
|
|
|
09-02-2010
|
0.00
|
Roll Bar - Mark and trim top of roll bar channel.
|
Details
|
|
|
09-01-2010
|
0.00
|
Roll Bar - Test fit roll bar channels in jig.
|
Details
|
|
|
06-07-2010
|
0.00
|
Roll Bar, Make F-631C and D angles. Part 2.
|
Details
|
|
|
06-05-2010
|
0.00
|
Roll Bar, Make F-631C and D angles. Part 1.
|
Details
|
|
|
06-04-2010
|
0.00
|
Drill top forward holes in top skin to #30. Part 2
|
Details
|
|
|
06-03-2010
|
0.00
|
Drill top forward holes in top skin to #30.
|
Details
|
|
|
06-02-2010
|
0.00
|
Rivet F-709 Bulkhead.
|
Details
|
|
|
06-01-2010
|
0.00
|
New building buddy Mike Bullock.
|
Details
|
|
|
05-31-2010
|
0.00
|
Aft F-656-L Gusset Plate.
|
Details
|
|
|
05-30-2010
|
0.00
|
Aft F-656-R Gusset Plate.
|
Details
|
|
|
05-29-2010
|
0.00
|
Forward F-656-L Gusset Plate.
|
Details
|
|
|
05-28-2010
|
0.00
|
Forward F-656-R Gusset Plate.
|
Details
|
|
|
05-27-2010
|
0.00
|
Pitot Static Part 3, Installation complete.
|
Details
|
|
|
05-26-2010
|
0.00
|
Pitot Static Part 2, Install system, clamp pop riv
|
Details
|
|
|
05-25-2010
|
0.00
|
Pitot Static Part 1, Prepare pop rivet.
|
Details
|
|
|
05-24-2010
|
0.00
|
Atached 21 Platenuts on 706 bullkhead
|
Details
|
|
|
03-22-2010
|
0.00
|
Drove to VANS to pick up Steve's finishing kit.
|
Details
|
|
|
03-21-2010
|
0.00
|
Fitting F-707B angle
|
Details
|
|
|
03-20-2010
|
0.00
|
Drill F-656 Gussets to Longeron
|
Details
|
|
|
03-19-2010
|
0.00
|
Tape aft top skin up and out of the way.
|
Details
|
|
|
03-18-2010
|
0.00
|
Test fit shoulder harness cable through wear block
|
Details
|
|
|
03-17-2010
|
0.00
|
Cut shoulder harness cable slot in F651 bulkhead.
|
Details
|
|
|
03-16-2010
|
0.00
|
Match drill bulkhead halves through wear blocks.
|
Details
|
|
|
03-15-2010
|
0.00
|
Drill shoulder harness cable wear blocks.
|
Details
|
|
|
03-14-2010
|
0.00
|
Match drill upper half edge holes through scrap.
|
Details
|
|
|
03-13-2010
|
0.00
|
Join top/bottom 652/751 bulkhead halves.
|
Details
|
|
|
03-12-2010
|
0.00
|
Shape upper side of F-652 Baggage Bulkhead.
|
Details
|
|
|
03-11-2010
|
0.00
|
Drill F-751 baggage bulkhead to F-706 bulkhead.
|
Details
|
|
|
03-10-2010
|
0.00
|
Platenut the baggage side coverers.
|
Details
|
|
|
03-09-2010
|
0.00
|
Random pictures of aft top skins clecoed on.
|
Details
|
|
|
03-08-2010
|
0.00
|
Final Drill AFt F709 Bulkhead
|
Details
|
|
|
03-07-2010
|
0.00
|
Match drill Aft Top Skins
|
Details
|
|
|
03-06-2010
|
0.00
|
Drill top F-786A J Stiffeners through aft top skin
|
Details
|
|
|
03-05-2010
|
0.00
|
Remake top F-786A Fuse. J Stiffeners.
|
Details
|
|
|
03-04-2010
|
0.00
|
Deblue/debur aft top skins.
|
Details
|
|
|
03-03-2010
|
0.00
|
Static line clip locations.
|
Details
|
|
|
03-02-2010
|
0.00
|
Rivet static line attach clips.
|
Details
|
|
|
03-01-2010
|
0.00
|
Fabricate static line clips, Part 6.
|
Details
|
|
|
02-28-2010
|
0.00
|
Fabricate static line clips, Part 4.
|
Details
|
|
|
02-27-2010
|
0.00
|
Fabricate static line clips, Part 3.
|
Details
|
|
|
02-26-2010
|
0.00
|
Fabricate static line clips, Part 2.
|
Details
|
|
|
02-25-2010
|
0.00
|
Fabricate static line clips, Part 1.
|
Details
|
|
|
02-24-2010
|
0.00
|
Join fore/aft F-721 canopy decks
|
Details
|
|
|
02-23-2010
|
0.00
|
Locate and drill F-721A forward canopy deck.
|
Details
|
|
|
02-22-2010
|
0.00
|
Finished square holes in F-757 gusset.
|
Details
|
|
|
02-21-2010
|
0.00
|
Square hole in F-757 Gusset.
|
Details
|
|
|
02-20-2010
|
0.00
|
Fit F-721-A forwad canopy deck.
|
Details
|
|
|
02-19-2010
|
0.00
|
Results of driling the F-575-T Gusset.
|
Details
|
|
|
02-18-2010
|
0.00
|
Mark and drill the F-757-T through longeron.
|
Details
|
|
|
02-17-2010
|
0.00
|
Trim F-721B aft canopy deck.
|
Details
|
|
|
02-16-2010
|
0.00
|
Bolt and torque rear spar wing spacer.
|
Details
|
|
|
02-15-2010
|
0.00
|
Prime floors and baggage covers.
|
Details
|
|
|
02-14-2010
|
0.00
|
Mystery Picture.
|
Details
|
|
|
02-13-2010
|
0.00
|
Rivet seat bottom mounting hinge.
|
Details
|
|
|
02-12-2010
|
0.00
|
Finish flap actuator mount,
|
Details
|
|
|
02-11-2010
|
0.00
|
Making use of the rotisserie.
|
Details
|
|
|
02-10-2010
|
0.00
|
Aft turtle deck riveted.
|
Details
|
|
|
02-09-2010
|
0.00
|
Rivet F-714 aft turtle deck.
|
Details
|
|
|
02-08-2010
|
0.00
|
Rivet aft deck F-711D angle.
|
Details
|
|
|
02-07-2010
|
0.00
|
Debur and prime aft turtle deck and spacers.
|
Details
|
|
|
02-06-2010
|
0.00
|
Drilling the aft turtle deck.
|
Details
|
|
|
02-05-2010
|
0.00
|
Drill F-714 turtle deck to fuselage.
|
Details
|
|
|
02-04-2010
|
0.00
|
Fabricate turtle deck spacers 710C and 711E.
|
Details
|
|
|
02-03-2010
|
0.00
|
Roll the Boat, or is that Flip the Canoe.
|
Details
|
|
|
02-02-2010
|
0.00
|
Rivet interferes with main gear weldment.
|
Details
|
|
|
02-01-2010
|
0.00
|
Torque Bolts going through wing main spar.
|
Details
|
|
|
01-09-2010
|
0.00
|
Misc fuelage riveting before I roll the boat.
|
Details
|
|
|
01-08-2010
|
0.00
|
Another fuselage rivet session with Mindy.
|
Details
|
|
|
01-07-2010
|
0.00
|
Mindy is my new prefered bucking buddy.
|
Details
|
|
|
01-06-2010
|
0.00
|
More fuselage riveting today.
|
Details
|
|
|
01-05-2010
|
0.00
|
Rivet flap actuator housing.
|
Details
|
|
|
01-04-2010
|
0.00
|
De-Dimmple aft 2 holes on bottom skin flange.
|
Details
|
|
|
01-03-2010
|
0.00
|
Proseal firewall to fuselage.
|
Details
|
|
|
01-02-2010
|
0.00
|
Locate and cleco the F-796/B/C/D
|
Details
|
|
|
01-01-2010
|
0.00
|
Rivet forward floor stiffeners.
|
Details
|
|
|
12-13-2009
|
0.00
|
Attach rotisserie frame to engine stand.
|
Details
|
|
|
12-12-2009
|
0.00
|
Build rotisserie engine stand attach brace.
|
Details
|
|
|
12-11-2009
|
0.00
|
Build rotisserie firewall frame.
|
Details
|
|
|
12-10-2009
|
0.00
|
Prep and prime flap actuator cover parts.
|
Details
|
|
|
12-09-2009
|
0.00
|
Drill for platenuts on the flap backrest brace.
|
Details
|
|
|
12-08-2009
|
0.00
|
Misc flap actuator cover fabrication.
|
Details
|
|
|
12-07-2009
|
0.00
|
Rercess bolt in flap actuator channel.
|
Details
|
|
|
12-06-2009
|
0.00
|
Enlarge engine mount holes to 1/4" and bolt on.
|
Details
|
|
|
12-05-2009
|
0.00
|
Fuselage rivet status.
|
Details
|
|
|
12-05-2009
|
0.00
|
Fuselage conical bend riveted.
|
Details
|
|
|
12-04-2009
|
0.00
|
Drill engine mount to firewall using bushings.
|
Details
|
|
|
12-03-2009
|
0.00
|
Top engine mount hole to firewall alignment.
|
Details
|
|
|
12-03-2009
|
0.00
|
Bottom engine mount hole to firewall alignment.
|
Details
|
|
|
12-02-2009
|
0.00
|
Clamp engine mount to saw horses for drilling.
|
Details
|
|
|
12-01-2009
|
0.00
|
Make drill bushings for drilling engine mount.
|
Details
|
|
|
11-30-2009
|
0.00
|
7 Wing bolts, Cherry max rivets, stack of boxes.
|
Details
|
|
|
11-30-2009
|
0.00
|
6 Just more parts orgainzed in bug boxes.
|
Details
|
|
|
11-30-2009
|
0.00
|
5 Special washers, screws, cotter pins, platenuts.
|
Details
|
|
|
11-30-2009
|
0.00
|
4 Nuts, bolts and washer bug boxes
|
Details
|
|
|
11-30-2009
|
0.00
|
3 Bug boxes filled with parts.
|
Details
|
|
|
11-30-2009
|
0.00
|
2 Another package to break apart.
|
Details
|
|
|
11-30-2009
|
0.00
|
1 Smaller package break down.
|
Details
|
|
|
11-29-2009
|
0.00
|
8 store away the canopy and engine cowl.
|
Details
|
|
|
11-29-2009
|
0.00
|
7 Cleveland wheels and brakes.
|
Details
|
|
|
11-29-2009
|
0.00
|
6 Unwrap packages.
|
Details
|
|
|
11-29-2009
|
0.00
|
5 Small package with engine mount under canopy.
|
Details
|
|
|
11-29-2009
|
0.00
|
4 Remove small packages and cowl.
|
Details
|
|
|
11-29-2009
|
0.00
|
3 Remove small wrapped items.
|
Details
|
|
|
11-29-2009
|
0.00
|
2 Closer look inside finish kit box.
|
Details
|
|
|
11-29-2009
|
0.00
|
1 Pop the top.
|
Details
|
|
|
11-28-2009
|
0.00
|
.....PICKED UP FINISH KIT......
|
Details
|
|
|
11-27-2009
|
0.00
|
Tight flush rivet around rear wing spar.
|
Details
|
|
|
11-26-2009
|
0.00
|
Rivet up the F-601K Firewall Recess. Part 2.
|
Details
|
|
|
11-25-2009
|
0.00
|
Rivet up the F-601K Firewall Recess. Part 1.
|
Details
|
|
|
11-24-2009
|
0.00
|
Install floor platenuts for tunnel and flap housin
|
Details
|
|
|
11-23-2009
|
0.00
|
Fabricate aft end of F-741A Cover Support. Part 3.
|
Details
|
|
|
11-22-2009
|
0.00
|
Fabricate aft end of F-741A Cover Support. Part 2.
|
Details
|
|
|
11-21-2009
|
0.00
|
Fabricate aft end of F-741A Cover Support. Part 1.
|
Details
|
|
|
11-20-2009
|
0.00
|
Drill/Fabricate forward end of 741A cover support.
|
Details
|
|
|
11-19-2009
|
0.00
|
Fabricate F-741B Tunnel Cover Plate.
|
Details
|
|
|
11-18-2009
|
0.00
|
Rivet Seat Backrests, Part 2.
|
Details
|
|
|
11-18-2009
|
0.00
|
Rivet Seat Backrests, Part 1.
|
Details
|
|
|
11-17-2009
|
0.00
|
Drill flap center bearing block.
|
Details
|
|
|
11-16-2009
|
0.00
|
Straighten WD-613 Flap Actuator Weldment.
|
Details
|
|
|
11-16-2009
|
0.00
|
Pick up Steve's Engine Mount kit.
|
Details
|
|
|
11-15-2009
|
0.00
|
9. Trim F-767 Attch Bracket to length.
|
Details
|
|
|
11-15-2009
|
0.00
|
8. Fabricate and drill F-767 Attach Plate.
|
Details
|
|
|
11-15-2009
|
0.00
|
7. Drill top of F-785A Backrest Brace.
|
Details
|
|
|
11-15-2009
|
0.00
|
6. Drill bottom of 785A Backrest Brace.
|
Details
|
|
|
11-15-2009
|
0.00
|
5. Fabricate flap actuator housing F-785B
|
Details
|
|
|
11-15-2009
|
0.00
|
4. Flap bearing block attach hole location is bad.
|
Details
|
|
|
11-15-2009
|
0.00
|
3. Fabricate flap center bearing block.
|
Details
|
|
|
11-15-2009
|
0.00
|
2. Mark up flap center bearing block F-680.
|
Details
|
|
|
11-15-2009
|
0.00
|
14. Fabricate spacer and fit Flap Actuator.
|
Details
|
|
|
11-15-2009
|
0.00
|
13. Match Drill 3 holes in F-766B through Channel.
|
Details
|
|
|
11-15-2009
|
0.00
|
12. Match Drill hole in F-766B Angle.
|
Details
|
|
|
11-15-2009
|
0.00
|
11. Match drill center hole in F-766C Plate.
|
Details
|
|
|
11-15-2009
|
0.00
|
10. Match Drill Actuator Channel through F-766C.
|
Details
|
|
|
11-15-2009
|
0.00
|
1. Fabricate flap actuator F-766B.
|
Details
|
|
|
11-14-2009
|
0.00
|
Remove un-needed piano himge eyes.
|
Details
|
|
|
11-13-2009
|
0.00
|
I take home Dick VanGrunsven's pie.
|
Details
|
|
|
11-13-2009
|
0.00
|
Details on aft seat hinge.
|
Details
|
|
|
11-12-2009
|
0.00
|
Match drill seat through seat hinges.
|
Details
|
|
|
11-11-2009
|
0.00
|
Drill seat hinges, F-637E
|
Details
|
|
|
11-10-2009
|
0.00
|
Drill upper seat back hinge F-637D
|
Details
|
|
|
11-10-2009
|
0.00
|
Drill lightening holes in seat back brace.s
|
Details
|
|
|
11-10-2009
|
0.00
|
Deviation - Drill upper seat back angle, again.
|
Details
|
|
|
11-10-2009
|
0.00
|
Deviation - Drill angle to top top of seat back.
|
Details
|
|
|
11-10-2009
|
0.00
|
Debur and scotch bright seat backs.
|
Details
|
|
|
11-09-2009
|
0.00
|
Drill seat back upper hinge F-637D
|
Details
|
|
|
11-09-2009
|
0.00
|
Drill bottom horizontal seat back angle.
|
Details
|
|
|
11-09-2009
|
0.00
|
Detail pictures of bottom of seat back.
|
Details
|
|
|
11-08-2009
|
0.00
|
Drill top F-637C horizontal angle to seat back.
|
Details
|
|
|
11-07-2009
|
0.00
|
Round top seat back horizontal angle F-637C.
|
Details
|
|
|
11-07-2009
|
0.00
|
Notch vertical angle so hinge fits flush.
|
Details
|
|
|
11-07-2009
|
0.00
|
Cut corner angle in vertical seat back angle.
|
Details
|
|
|
11-06-2009
|
0.00
|
Match drill Seat Back through vertical angle.
|
Details
|
|
|
11-06-2009
|
0.00
|
Mark hole locations on Seat back vertical angle.
|
Details
|
|
|
11-06-2009
|
0.00
|
Drill Seat Back F-637B veritical angles.
|
Details
|
|
|
11-06-2009
|
0.00
|
Cut/Shape F-639B Seat Back verticl angle.
|
Details
|
|
|
11-05-2009
|
0.00
|
Fabricate F-638 seat back brace.
|
Details
|
|
|
11-04-2009
|
0.00
|
Gather setback mterials nd cut angles.
|
Details
|
|
|
11-03-2009
|
0.00
|
Rivet elevator bellcrank.
|
Details
|
|
|
11-02-2009
|
0.00
|
Prime forward fuselage cover plates.
|
Details
|
|
|
11-01-2009
|
0.00
|
Drill 3 holes in 982E for engine control cables.
|
Details
|
|
|
10-31-2009
|
0.00
|
Bent heater vent fins in
|
Details
|
|
|
10-30-2009
|
0.00
|
Mount fuel valve on anchor plate.
|
Details
|
|
|
10-29-2009
|
0.00
|
Prepare fuel valve anchor plate.
|
Details
|
|
|
10-28-2009
|
0.00
|
Prepare forward fuselgae covers.
|
Details
|
|
|
10-27-2009
|
0.00
|
Prep forward cabin area, Part2.
|
Details
|
|
|
10-26-2009
|
0.00
|
Prep forward cabin area, Part1.
|
Details
|
|
|
10-25-2009
|
0.00
|
More fuselage bucking with Stephanie.
|
Details
|
|
|
10-24-2009
|
0.00
|
Misc fuselage prep while I wait for Stephanie.
|
Details
|
|
|
10-23-2009
|
0.00
|
Install platenuts in F-715 outer floor ribs.
|
Details
|
|
|
10-22-2009
|
0.00
|
Rivet F-728B angle to F-728 Bellcrank channel,
|
Details
|
|
|
10-21-2009
|
0.00
|
Rivet 708 bulkhead to 728 bellcrank channel.
|
Details
|
|
|
10-20-2009
|
0.00
|
Fabricate F-634 Elevator Bellcrank
|
Details
|
|
|
10-19-2009
|
0.00
|
Drill shoulder harness anchors.
|
Details
|
|
|
10-18-2009
|
0.00
|
See the F-695 Gusset holes in longerons.
|
Details
|
|
|
10-18-2009
|
0.00
|
See the F-695 Gusset holes in firewall weldment.
|
Details
|
|
|
10-17-2009
|
0.00
|
Debur fuselage anfter drilling F-695 Gusset.
|
Details
|
|
|
10-16-2009
|
0.00
|
Remove F-695 gusset and debur.
|
Details
|
|
|
10-15-2009
|
0.00
|
Drill F-695 Gusset to Fuseage.
|
Details
|
|
|
10-14-2009
|
0.00
|
Drill holes in F-695 Gusset.
|
Details
|
|
|
10-13-2009
|
0.00
|
Measure out hole locations in F-695 Gusset.
|
Details
|
|
|
10-12-2009
|
0.00
|
Rivet Fuselage with Stephanie on bucking bar.
|
Details
|
|
|
10-11-2009
|
0.00
|
Attach F-719 stiffener and agle clip to firewall.
|
Details
|
|
|
10-10-2009
|
0.00
|
Right side conical bend fit.
|
Details
|
|
|
10-09-2009
|
0.00
|
Right spacer, baggage bulkhead and skin.
|
Details
|
|
|
10-08-2009
|
0.00
|
Left side conical bend fit.
|
Details
|
|
|
10-07-2009
|
0.00
|
Left spacer, baggage bulkhead and skin. Part 2.
|
Details
|
|
|
10-06-2009
|
0.00
|
Left spacer, baggage bulkhead and skin. Part 1.
|
Details
|
|
|
10-05-2009
|
0.00
|
Fuselage - Attach forward main spar. Last time.
|
Details
|
|
|
10-04-2009
|
0.00
|
Fuselage - Rivet aft end of outside seat rib, F-71
|
Details
|
|
|
10-03-2009
|
0.00
|
Fuselage - Join center section to aft fuselage.
|
Details
|
|
|
10-02-2009
|
0.00
|
Fuselage - Center section ready to join to aft fus
|
Details
|
|
|
10-01-2009
|
0.00
|
Fuselage - More baggage floor platenuts.
|
Details
|
|
|
09-30-2009
|
0.00
|
Fuselage - Delete hole with horrible edge distance
|
Details
|
|
|
09-29-2009
|
0.00
|
Fuselage - Rivet aft baggage ribs to 706 buckhead.
|
Details
|
|
|
09-28-2009
|
0.00
|
Fuselage - Rivet Longeron.
|
Details
|
|
|
09-27-2009
|
0.00
|
Fuselage - Rivet platenuts for access covers.
|
Details
|
|
|
09-26-2009
|
0.00
|
Fuselage - Rivet F-704H to side skin.
|
Details
|
|
|
09-25-2009
|
0.00
|
Fuselage - Rivet F-7101 to F-902 bulkhead.
|
Details
|
|
|
09-24-2009
|
0.00
|
Fuselage - Rivet firwall misc.
|
Details
|
|
|
09-23-2009
|
0.00
|
Fuselage - Rivet Armrest support angles.
|
Details
|
|
|
09-22-2009
|
0.00
|
Fuselage - Fix 705 bulkhead for baggage rivets.
|
Details
|
|
|
09-21-2009
|
0.00
|
Fuselage - Rivet platenuts to 705. Part 2.
|
Details
|
|
|
09-20-2009
|
0.00
|
Fuselage - Rivet platenuts to 705. Part 1.
|
Details
|
|
|
09-19-2009
|
0.00
|
Fuselage - Prime Longerons and Armrests.
|
Details
|
|
|
09-18-2009
|
0.00
|
Fuselage - Reinforce armrest with angle.
|
Details
|
|
|
09-17-2009
|
0.00
|
Fuselage - Route static, 705 Bulkhead. Part 2.
|
Details
|
|
|
09-16-2009
|
0.00
|
Fuselage - Route static, 705 Bulkhead. Part 1.
|
Details
|
|
|
09-15-2009
|
0.00
|
Fuselage - Counter sink longeron.
|
Details
|
|
|
09-14-2009
|
0.00
|
Fuselage - Misc prep.
|
Details
|
|
|
09-13-2009
|
0.00
|
Fuselage - Prime side main skins, forward bottom s
|
Details
|
|
|
09-12-2009
|
0.00
|
Fuselage - counter sink hard to reach places.
|
Details
|
|
|
09-11-2009
|
0.00
|
Fuselage - Prime center and forward parts.
|
Details
|
|
|
09-10-2009
|
0.00
|
Fuselage - hole in side skin for wing wires.
|
Details
|
|
|
09-09-2009
|
0.00
|
Disassemble forward fuselage. Prep for riveting.
|
Details
|
|
|
09-08-2009
|
0.00
|
Prep Baggge Area Bulkheads. Part 2.
|
Details
|
|
|
09-08-2009
|
0.00
|
Prep Baggge Area Bulkheads. Part 1.
|
Details
|
|
|
09-07-2009
|
0.00
|
Cut lightening holes in rudder center brace.
|
Details
|
|
|
09-07-2009
|
0.00
|
1" hole in side skin for fuel line.
|
Details
|
|
|
09-06-2009
|
0.00
|
Matabo Electric Drill
|
Details
|
|
|
09-06-2009
|
0.00
|
Hole saw.
|
Details
|
|
|
09-06-2009
|
0.00
|
Disassemble and prep forward fuselage parts.
|
Details
|
|
|
09-06-2009
|
0.00
|
Counter sink bottom angle on firewall.
|
Details
|
|
|
09-05-2009
|
0.00
|
Counter Sink #12 holes on forwrd side skin.
|
Details
|
|
|
09-04-2009
|
0.00
|
Drill Gear Leg Weldments.
|
Details
|
|
|
09-03-2009
|
0.00
|
Mount Gear Leg Weldments.
|
Details
|
|
|
09-02-2009
|
0.00
|
Shop Status.
|
Details
|
|
|
09-02-2009
|
0.00
|
Floor Stiffeners - Drill stiffener flange. Part 6.
|
Details
|
|
|
09-02-2009
|
0.00
|
Floor Stiffeners - Drill stiffener flange. Part 5.
|
Details
|
|
|
09-02-2009
|
0.00
|
Floor Stiffeners - Drill outer stiffener. Part 4.
|
Details
|
|
|
09-02-2009
|
0.00
|
Floor Stiffeners - Drill aft end, Part 3.
|
Details
|
|
|
09-02-2009
|
0.00
|
Floor Stiffeners - Drill 601 angle, Part 2.
|
Details
|
|
|
09-02-2009
|
0.00
|
Floor Stiffeners - Drill 601 angle, Part 1.
|
Details
|
|
|
09-01-2009
|
0.00
|
Drill single F-902 bulkhead hole.
|
Details
|
|
|
08-31-2009
|
0.00
|
Work Bench Status
|
Details
|
|
|
08-30-2009
|
0.00
|
Drill brake master cylinder bracket.
|
Details
|
|
|
08-29-2009
|
0.00
|
Trim rudder pedal center brace.
|
Details
|
|
|
08-28-2009
|
0.00
|
Drill rudder bedal center brace and bearing block.
|
Details
|
|
|
08-27-2009
|
0.00
|
Both rudder pedal weldmenst are bent.
|
Details
|
|
|
08-26-2009
|
0.00
|
Drill rudder bedal bearing blocks to 719 stiffener
|
Details
|
|
|
08-25-2009
|
0.00
|
Brake pedal presentation.
|
Details
|
|
|
08-24-2009
|
0.00
|
Rivet bake pedals.
|
Details
|
|
|
08-23-2009
|
0.00
|
Ream brake pedals to accept long AN3-56 bolts.
|
Details
|
|
|
08-22-2009
|
0.00
|
Slice F-6115 center rudder block in half.
|
Details
|
|
|
08-21-2009
|
0.00
|
Drill rudder pedal bearing blocks.
|
Details
|
|
|
08-20-2009
|
0.00
|
Edge and face finish brake pedals.
|
Details
|
|
|
08-19-2009
|
0.00
|
Dirll brake pedals Part 3.
|
Details
|
|
|
08-18-2009
|
0.00
|
Dirll brake pedals Part 2.
|
Details
|
|
|
08-17-2009
|
0.00
|
Drill brake bedals Part 1.
|
Details
|
|
|
08-16-2009
|
0.00
|
Prep break pedal plates.
|
Details
|
|
|
08-15-2009
|
0.00
|
Rudder/Brake preparation.
|
Details
|
|
|
08-14-2009
|
0.00
|
Drill half dozen lower longeron holes.
|
Details
|
|
|
08-13-2009
|
0.00
|
Drill F-795 Fuel Tank Attach Bracket.
|
Details
|
|
|
08-12-2009
|
0.00
|
Drill F-796 B/C/D
|
Details
|
|
|
08-11-2009
|
0.00
|
Fit F-796 B/C/D
|
Details
|
|
|
08-10-2009
|
0.00
|
Fabricate F-796 B/C/D
|
Details
|
|
|
08-09-2009
|
0.00
|
How does this happen.
|
Details
|
|
|
08-09-2009
|
0.00
|
Bought some more Vans clothing.
|
Details
|
|
|
08-08-2009
|
0.00
|
Ruined F-902 and F-7101
|
Details
|
|
|
08-07-2009
|
0.00
|
Locate the F-902 to the F-7101
|
Details
|
|
|
08-06-2009
|
0.00
|
Match Drill the Shims to the F-7101
|
Details
|
|
|
08-05-2009
|
0.00
|
Make shims for F-902 and F-7101.
|
Details
|
|
|
08-04-2009
|
0.00
|
Prep F-902 Forward Bulkhead
|
Details
|
|
|
08-03-2009
|
0.00
|
Drill F-684 Bottom Gusset
|
Details
|
|
|
08-02-2009
|
0.00
|
Locate F-684 Bottom Gusset
|
Details
|
|
|
08-01-2009
|
0.00
|
Complete holes through F-717 and lower Longeron.
|
Details
|
|
|
07-31-2009
|
0.00
|
Drill pilot holes through F-717 and lower Longeron
|
Details
|
|
|
07-30-2009
|
0.00
|
Locate holes, Lower Longeron and wend mont.
|
Details
|
|
|
07-29-2009
|
0.00
|
Fitting F-717 Lower Longeron.
|
Details
|
|
|
07-28-2009
|
0.00
|
Fabricate F-717 Lower Longeron.
|
Details
|
|
|
07-27-2009
|
0.00
|
Drill F-719 Stiffener to airframe.
|
Details
|
|
|
07-19-2009
|
0.00
|
Drill F-7198 Clip to 719 stiffener.
|
Details
|
|
|
07-18-2009
|
0.00
|
Twist and shape F-717 Lower Longeron.
|
Details
|
|
|
07-17-2009
|
0.00
|
Bought some Cherry Max rivets.
|
Details
|
|
|
07-16-2009
|
0.00
|
Make gear hole in forward bottom skin.
|
Details
|
|
|
07-15-2009
|
0.00
|
Fit gear mount, Enlarge holes.
|
Details
|
|
|
07-14-2009
|
0.00
|
Fit gear mount, Add edge notch.
|
Details
|
|
|
07-13-2009
|
0.00
|
Two year building anniversary.
|
Details
|
|
|
07-12-2009
|
0.00
|
Drill firewall weldmont.
|
Details
|
|
|
07-11-2009
|
0.00
|
Drill firewall sides.
|
Details
|
|
|
07-10-2009
|
0.00
|
Dirll Firewall Bottom
|
Details
|
|
|
07-09-2009
|
0.00
|
Make and drill 704 straps
|
Details
|
|
|
07-08-2009
|
0.00
|
Cut forward longeron.
|
Details
|
|
|
07-07-2009
|
0.00
|
Cleco side skin and drill it.
|
Details
|
|
|
07-06-2009
|
0.00
|
Step -Cut holes in fuselage side skin.
|
Details
|
|
|
07-05-2009
|
0.00
|
Curve side skin tab results.
|
Details
|
|
|
07-04-2009
|
0.00
|
Curve side skin tab.
|
Details
|
|
|
07-03-2009
|
0.00
|
Curve side skin tap setup.
|
Details
|
|
|
07-02-2009
|
0.00
|
Drill arm rest.
|
Details
|
|
|
07-01-2009
|
0.00
|
Cleco fuselage side skins.
|
Details
|
|
|
06-21-2009
|
0.00
|
De-Blue center side skin.
|
Details
|
|
|
06-20-2009
|
0.00
|
Mate rear fuselage with center fuselage.
|
Details
|
|
|
06-19-2009
|
0.00
|
Cut longeron slots.
|
Details
|
|
|
06-18-2009
|
0.00
|
Mark longeron slot locations.
|
Details
|
|
|
06-17-2009
|
0.00
|
Center Section - Install forward main spar.
|
Details
|
|
|
06-16-2009
|
0.00
|
Center Section - Rivet bottom Skin.
|
Details
|
|
|
06-15-2009
|
0.00
|
Center Section - Prep for riveting bottom skin.
|
Details
|
|
|
06-14-2009
|
0.00
|
Center Section - Rivet seat and baggage ribs to 70
|
Details
|
|
|
06-13-2009
|
0.00
|
Center Section - Rivet seat ribs to main spar resu
|
Details
|
|
|
06-12-2009
|
0.00
|
Center Section - Rivet seat ribs to main wing spar
|
Details
|
|
|
06-11-2009
|
0.00
|
Mickey meets us in Florida.
|
Details
|
|
|
06-10-2009
|
0.00
|
Center Section - Install 142 platenuts. Or so.
|
Details
|
|
|
06-09-2009
|
0.00
|
Center Section - Rivet center floor rib access pla
|
Details
|
|
|
06-08-2009
|
0.00
|
Center Section - Prime ribs and misc.
|
Details
|
|
|
06-07-2009
|
0.00
|
Center Section - Dimple main spar.
|
Details
|
|
|
06-06-2009
|
0.00
|
Center Section - Dimple away
|
Details
|
|
|
06-05-2009
|
0.00
|
Center Section - Counter sink platenut anchor hole
|
Details
|
|
|
06-04-2009
|
0.00
|
Center Section - Drill floor platenut anchor holes
|
Details
|
|
|
06-03-2009
|
0.00
|
Replace plastic clamp jaws with wood.
|
Details
|
|
|
06-03-2009
|
0.00
|
Center Section - Disassemble and debur.
|
Details
|
|
|
06-02-2009
|
0.00
|
Drill fuselage center section for #8 scews.
|
Details
|
|
|
06-01-2009
|
0.00
|
Platenut Jig from Avery Tools
|
Details
|
|
|
06-01-2009
|
0.00
|
DrillF-715 outside floor rib.
|
Details
|
|
|
05-31-2009
|
0.00
|
Center Section - Strategize for screwing floor ins
|
Details
|
|
|
05-30-2009
|
0.00
|
Center Section - Prep saet and baggage floors.
|
Details
|
|
|
05-29-2009
|
0.00
|
Crotch strap - Locate and drill forward bracket.
|
Details
|
|
|
05-28-2009
|
0.00
|
Crotch strap - Locate and drill aft bracket.
|
Details
|
|
|
05-27-2009
|
0.00
|
drill 2 1/4" holes in center main spar.
|
Details
|
|
|
05-26-2009
|
0.00
|
Center Section - Final drill misc
|
Details
|
|
|
05-25-2009
|
0.00
|
F-623 Corner rib - Trim for step.
|
Details
|
|
|
05-25-2009
|
0.00
|
F-623 Corner rib - Locate trim for step.
|
Details
|
|
|
05-24-2009
|
0.00
|
F-623 Corner rib - Prep the ribs.
|
Details
|
|
|
05-24-2009
|
0.00
|
F-623 Corner rib - fabricate rear rib straps.
|
Details
|
|
|
05-24-2009
|
0.00
|
F-623 Corner rib - Fabricate forward strap.
|
Details
|
|
|
05-24-2009
|
0.00
|
F-623 Corner rib - Drill right rib to bottom skin.
|
Details
|
|
|
05-24-2009
|
0.00
|
F-623 Corner rib - Drill left rib to bottom skin.
|
Details
|
|
|
05-23-2009
|
0.00
|
Final drill center section skin.
|
Details
|
|
|
05-23-2009
|
0.00
|
Final drill center section ribs.
|
Details
|
|
|
05-22-2009
|
0.00
|
Seat and baggage ribs in place.
|
Details
|
|
|
05-22-2009
|
0.00
|
F-776 Center section bottom skin preparation.
|
Details
|
|
|
05-21-2009
|
0.00
|
Trim F-634 Seat belt anchors.
|
Details
|
|
|
05-20-2009
|
0.00
|
F-727 Seat rib snap bushing cutout.
|
Details
|
|
|
05-20-2009
|
0.00
|
F-726 Baggage Rib. Cut 1.5" hole for step.
|
Details
|
|
|
05-19-2009
|
0.00
|
Baggage rib preperation
|
Details
|
|
|
05-18-2009
|
0.00
|
F-716 Seat Rib - More snap bushing holes.
|
Details
|
|
|
05-17-2009
|
0.00
|
F-716 Seat Rib - Cut rib for access plate. Part 2
|
Details
|
|
|
05-16-2009
|
0.00
|
F-716 Seat Rib - Cut rib for access plate. Part 1
|
Details
|
|
|
05-15-2009
|
0.00
|
F-716 Seat Rib - Straighten flanges and flute.
|
Details
|
|
|
05-14-2009
|
0.00
|
Mindy helps to slow things down a bit.
|
Details
|
|
|
05-14-2009
|
0.00
|
F-716 Seat Rib - Access Plate. Part 1.
|
Details
|
|
|
05-13-2009
|
0.00
|
F-716 Seat Rib - 5/8" Snap Bushing holes.
|
Details
|
|
|
05-12-2009
|
0.00
|
F-716 Seat RIb - Expand Lightening Hole. Part 2.
|
Details
|
|
|
05-11-2009
|
0.00
|
F-716 Seat RIb - Expand Lightening Hole. Part 1.
|
Details
|
|
|
05-10-2009
|
0.00
|
F-716 Seat Rib - Finish edges.
|
Details
|
|
|
05-09-2009
|
0.00
|
Rivet aft bottom fuselage bottom skin.
|
Details
|
|
|
05-09-2009
|
0.00
|
Fabricate F-916 Spacers
|
Details
|
|
|
05-08-2009
|
0.00
|
Rivet aft bottom fuselage side skins.
|
Details
|
|
|
05-07-2009
|
0.00
|
Rivet 711, 712 bulkheads to Tail Cone.
|
Details
|
|
|
05-06-2009
|
0.00
|
Prime and re assemble aft fuselage.
|
Details
|
|
|
05-05-2009
|
0.00
|
Drill and dimple rudder cable clamp hole.
|
Details
|
|
|
05-04-2009
|
0.00
|
Dimple aft fuselage.
|
Details
|
|
|
05-03-2009
|
0.00
|
Disassemble, debur aft fuselage.
|
Details
|
|
|
05-02-2009
|
0.00
|
Fabricate shim forward of tail cone.
|
Details
|
|
|
05-01-2009
|
0.00
|
Rudder Stop Alternative.
|
Details
|
|
|
04-30-2009
|
0.00
|
Drill aft bottom fuselage.
|
Details
|
|
|
04-29-2009
|
0.00
|
Cleco aft bottom fuselage. Part 6.
|
Details
|
|
|
04-29-2009
|
0.00
|
Cleco aft bottom fuselage. Part 5.
|
Details
|
|
|
04-29-2009
|
0.00
|
Cleco aft bottom fuselage. Part 4.
|
Details
|
|
|
04-29-2009
|
0.00
|
Cleco aft bottom fuselage. Part 3.
|
Details
|
|
|
04-29-2009
|
0.00
|
Cleco aft bottom fuselage. Part 2.
|
Details
|
|
|
04-28-2009
|
0.00
|
Cleco aft bottom fuselage. Part 1.
|
Details
|
|
|
04-27-2009
|
0.00
|
Shape Tail Cone, Fit 712 bulkhead.
|
Details
|
|
|
04-26-2009
|
0.00
|
Placed 708, 708 Bulkheads, Prep side skins.
|
Details
|
|
|
04-25-2009
|
0.00
|
J Stiffener Prep, Part 2.
|
Details
|
|
|
04-25-2009
|
0.00
|
J Stiffener Prep, Part 1.
|
Details
|
|
|
04-24-2009
|
0.00
|
Aft bottom skin prearation.
|
Details
|
|
|
04-23-2009
|
0.00
|
Fit 711, 712 Bulkhead to Tail Cone.
|
Details
|
|
|
04-22-2009
|
0.00
|
Trim 721 Canopy deck, 786 J channel ends.
|
Details
|
|
|
|
04-21-2009
|
0.00
|
Longeron - Sharp bend and twist.
|
Details
|
|
|
04-20-2009
|
0.00
|
Longeron - Drill 721 canopy Deck to Longeron.
|
Details
|
|
|
04-19-2009
|
0.00
|
Longeron - Fit 721 Aft Canopy Deck to Longeron.
|
Details
|
|
|
04-18-2009
|
0.00
|
Longeron - Clamp 0.032 strips.
|
Details
|
|
|
04-17-2009
|
0.00
|
Longeron - Make spacer to simulate skin.
|
Details
|
|
|
04-16-2009
|
0.00
|
Longeron - Check the curve.
|
Details
|
|
|
04-15-2009
|
0.00
|
Longeron - Process of bending the curve.
|
Details
|
|
|
04-14-2009
|
0.00
|
Longeron - Prepare bending tools.
|
Details
|
|
|
04-13-2009
|
0.00
|
Tool Apron.
|
Details
|
|
|
04-13-2009
|
0.00
|
Scribe.
|
Details
|
|
|
04-13-2009
|
0.00
|
Protractor
|
Details
|
|
|
04-12-2009
|
0.00
|
Longeron - Trim aft end.
|
Details
|
|
|
04-11-2009
|
0.00
|
Longeron - Sand to final length.
|
Details
|
|
|
04-10-2009
|
0.00
|
Longeron - Cut to rough length.
|
Details
|
|
|
04-09-2009
|
0.00
|
New large universal vice.
|
Details
|
|
|
04-09-2009
|
0.00
|
F-712 BH - Rivet.
|
Details
|
|
|
04-09-2009
|
0.00
|
F-710, F-711 BH - Rivet
|
Details
|
|
|
04-09-2009
|
0.00
|
F-706 BH - Rivet side bulkheads.
|
Details
|
|
|
04-09-2009
|
0.00
|
Box of large bolts.
|
Details
|
|
|
04-08-2009
|
0.00
|
F-706 BH - Rivet bellcrank junction.
|
Details
|
|
|
04-08-2009
|
0.00
|
F-706 BH - Rivet 728 Angle to 728 rib.
|
Details
|
|
|
04-08-2009
|
0.00
|
F-706 BH - Future rivet fix.
|
Details
|
|
|
04-07-2009
|
0.00
|
F-706 BH - Future rivet problem.
|
Details
|
|
|
04-06-2009
|
0.00
|
Prime 706 through 712 bulkheads.
|
Details
|
|
|
04-05-2009
|
0.00
|
F-712 BH - Dimple 712 bulkhead.
|
Details
|
|
|
04-04-2009
|
0.00
|
F-712 BH - Match drill 712E to bulkhead.
|
Details
|
|
|
04-03-2009
|
0.00
|
F-712 BH - Shape and tap 712E tie down bar.
|
Details
|
|
|
04-02-2009
|
0.00
|
F-711 BH - Shape 711C Stab Attach Bars
|
Details
|
|
|
04-02-2009
|
0.00
|
F-711 BH - Match drill 711D to bulkhead.
|
Details
|
|
|
04-02-2009
|
0.00
|
F-711 BH - Match drill 711C Stab Attach Bar.
|
Details
|
|
|
04-02-2009
|
0.00
|
F-711 BH - Cut out the web.
|
Details
|
|
|
04-01-2009
|
0.00
|
F-710 BH - Fabricate F-710 Bulkhead.
|
Details
|
|
|
03-31-2009
|
0.00
|
F-709,710,711,712 BH - Edge finishing.
|
Details
|
|
|
03-30-2009
|
0.00
|
F-708 BH - Drill Snap Bushing holes.
|
Details
|
|
|
03-29-2009
|
0.00
|
F-707 BH - Drill Snap Bushing holes.
|
Details
|
|
|
03-28-2009
|
0.00
|
Steve my brother gets his Fuselage.
|
Details
|
|
|
03-28-2009
|
0.00
|
F-706 BH - Drill Snap Bushing holes.
|
Details
|
|
|
03-27-2009
|
0.00
|
F-706 BH - Match drill snap bushing hole, Part 3.
|
Details
|
|
|
03-27-2009
|
0.00
|
F-706 BH - Match drill snap bushing hole, Part 2.
|
Details
|
|
|
03-27-2009
|
0.00
|
F-706 BH - Match drill snap bushing hole, Part 1.
|
Details
|
|
|
03-27-2009
|
0.00
|
F-706 BH - Mark location of snap bushing holes.
|
Details
|
|
|
03-27-2009
|
0.00
|
F-607 BH - Drill 728B angle.
|
Details
|
|
|
03-26-2009
|
0.00
|
F-706 BH - Drill a critical hole.
|
Details
|
|
|
03-25-2009
|
0.00
|
F-706 BH - Fab 729B angle and drill.
|
Details
|
|
|
03-24-2009
|
0.00
|
F-706 BH - Lets match drill what we can.
|
Details
|
|
|
03-23-2009
|
0.00
|
F-706 BH - Find the parts, Cleco it up.
|
Details
|
|
|
03-22-2009
|
0.00
|
Edge prep 3 rear bulkheads.
|
Details
|
|
|
03-21-2009
|
0.00
|
F-705 BH - Drill Flap Bearing Block.
|
Details
|
|
|
03-20-2009
|
0.00
|
F-705 BH - Rivet top Channel to side Channels.
|
Details
|
|
|
03-19-2009
|
0.00
|
F-705 BH - Rivet seat back adjustment.
|
Details
|
|
|
03-18-2009
|
0.00
|
F-705 BH - Rivet Rear Spar Attach.
|
Details
|
|
|
03-17-2009
|
0.00
|
F-705 BH - Polish, Etch, Prime.
|
Details
|
|
|
03-16-2009
|
0.00
|
Why I cant Step Drill where I want - Solution.
|
Details
|
|
|
03-16-2009
|
0.00
|
F-705 BH - Details.
|
Details
|
|
|
03-15-2009
|
0.00
|
F-705 BH - 605C counter sunk hole.
|
Details
|
|
|
03-14-2009
|
0.00
|
F-705 BH - 705A Snap Bushings.
|
Details
|
|
|
03-13-2009
|
0.00
|
F-705 BH - 705D Snap Bushings.
|
Details
|
|
|
03-12-2009
|
0.00
|
F-705 BH - Seat Back - End result.
|
Details
|
|
|
03-11-2009
|
0.00
|
F-705 BH - Seat Back - Drill 705F.
|
Details
|
|
|
03-10-2009
|
0.00
|
F-705 BH - Seat Back - Trim pieces to 16 1/4"
|
Details
|
|
|
03-09-2009
|
0.00
|
F-705 BH - Seat Back - Drill 705J Angle.
|
Details
|
|
|
03-08-2009
|
0.00
|
F-705 BH - Seat Back - Drill 705K.
|
Details
|
|
|
03-07-2009
|
0.00
|
F-705 BH - Seat Back - Drill 705L Shim
|
Details
|
|
|
03-06-2009
|
0.00
|
F-705 BH - Seat Back - Bend 705K part 2.
|
Details
|
|
|
03-05-2009
|
0.00
|
F-705 BH - Seat Back - Bend 705K part 1.
|
Details
|
|
|
03-04-2009
|
0.00
|
F-705 BH - Slot 705G angle part 4.
|
Details
|
|
|
03-03-2009
|
0.00
|
F-705 BH - Slot 705G angle part 3.
|
Details
|
|
|
03-02-2009
|
0.00
|
F-705 BH - Slot 705G angle part 2.
|
Details
|
|
|
03-01-2009
|
0.00
|
F-705 BH - Slot 705G angle part 1.
|
Details
|
|
|
02-28-2009
|
0.00
|
Grizzly 2 flute small end mills.
|
Details
|
|
|
02-27-2009
|
0.00
|
Grizzly Metal Lathe Machine.
|
Details
|
|
|
02-26-2009
|
0.00
|
F-705 BH - Drill 705G angle.
|
Details
|
|
|
02-25-2009
|
0.00
|
F-705 BH - Clamp 705G in prep for drilling.
|
Details
|
|
|
02-24-2009
|
0.00
|
F-705 BH - Clamp BH in prep for drilling 705G's.
|
Details
|
|
|
02-23-2009
|
0.00
|
F-705 BH - Drill 634 Seat belt Anchors
|
Details
|
|
|
02-22-2009
|
0.00
|
F-705 BH - Drill 605C and spacers.
|
Details
|
|
|
02-21-2009
|
0.00
|
F-705 BH - Make 705H Spacers
|
Details
|
|
|
02-20-2009
|
0.00
|
F-705 BH - Trim/Drill 705B to 705A
|
Details
|
|
|
02-18-2009
|
0.00
|
F-705 BH - Get parts orginized.
|
Details
|
|
|
02-17-2009
|
0.00
|
F-704 BH - Edge finish cleco the 704C uprights.
|
Details
|
|
|
02-16-2009
|
0.00
|
F-704 BH - Screw on 782 cover support ribs.
|
Details
|
|
|
02-15-2009
|
0.00
|
F-704 BH - Rivet 704M Stiffeners.
|
Details
|
|
|
02-14-2009
|
0.00
|
F-704 BH - Rivet 783B cover support ribs.
|
Details
|
|
|
02-13-2009
|
0.00
|
F-104 BH - Rivet Vertical Bar to center spar.
|
Details
|
|
|
02-12-2009
|
0.00
|
F-104 BH - Rivet F-704C/D's to main spar.
|
Details
|
|
|
02-11-2009
|
0.00
|
F-704 BH - Final drill F-704C/D uprights.
|
Details
|
|
|
02-10-2009
|
0.00
|
F-704 BH - Prime and attach platenuts to cover sup
|
Details
|
|
|
02-09-2009
|
0.00
|
F-704 BH - Drill cover support ribs for snap bushi
|
Details
|
|
|
02-08-2009
|
0.00
|
F-704 BH - Drill another cover support rib.
|
Details
|
|
|
02-07-2009
|
0.00
|
F-704 BH - Drill cover support rib and stiffener.
|
Details
|
|
|
02-06-2009
|
0.00
|
F-704 BH - 18 spar center platenuts.
|
Details
|
|
|
02-05-2009
|
0.00
|
F-704 BH - Bolt on control sticks.
|
Details
|
|
|
02-04-2009
|
0.00
|
F-704 BH - Ream control sticks bolt holes..
|
Details
|
|
|
02-03-2009
|
0.00
|
F-704 BH - Lighten up F-633's. Part 2.
|
Details
|
|
|
02-03-2009
|
0.00
|
F-704 BH - Lighten up F-633's. Part 1.
|
Details
|
|
|
02-02-2009
|
0.00
|
F-704 BH - Drill F-633's. Part 2.
|
Details
|
|
|
02-01-2009
|
0.00
|
F-704 BH - Drill F-633's. Part 1.
|
Details
|
|
|
01-31-2009
|
0.00
|
F-704 BH - Drill F-704 Center section vertical bar
|
Details
|
|
|
01-30-2009
|
0.00
|
F-704 BH - Drill 12 5/8 snap bushing holes.
|
Details
|
|
|
01-29-2009
|
0.00
|
Firewall - Rivet firewall. Part 6.
|
Details
|
|
|
01-29-2009
|
0.00
|
Firewall - Rivet firewall. Part 5.
|
Details
|
|
|
01-29-2009
|
0.00
|
Firewall - Rivet firewall. Part 4.
|
Details
|
|
|
01-29-2009
|
0.00
|
Firewall - Rivet firewall. Part 3.
|
Details
|
|
|
01-29-2009
|
0.00
|
Firewall - Rivet firewall. Part 2.
|
Details
|
|
|
01-29-2009
|
0.00
|
Firewall - Rivet firewall. Part 1.
|
Details
|
|
|
01-28-2009
|
0.00
|
Firewall - Primestiffeners and gussets.
|
Details
|
|
|
01-27-2009
|
0.00
|
Firewall - Dimple stainless steel firewall.
|
Details
|
|
|
01-26-2009
|
0.00
|
Firewall - Debur and polish stiffeners.
|
Details
|
|
|
01-25-2009
|
0.00
|
Firewall - Process stiffeners and gussets.
|
Details
|
|
|
01-24-2009
|
0.00
|
Firewall - Match drill 601J's to firewall. Part 2.
|
Details
|
|
|
01-24-2009
|
0.00
|
Firewall - Match drill 601J's to firewall. Part 1.
|
Details
|
|
|
01-23-2009
|
0.00
|
Firewall - Final drill 601P spacers.
|
Details
|
|
|
01-22-2009
|
0.00
|
Firewall - Vertical stand for firewall.
|
Details
|
|
|
01-21-2009
|
0.00
|
Firewall - Process firewall recess.
|
Details
|
|
|
01-21-2009
|
0.00
|
Firewall - Final drill firewall to stiffeners.
|
Details
|
|
|
01-20-2009
|
0.00
|
Firewall - Fit parts on firewall, Part 3.
|
Details
|
|
|
01-19-2009
|
0.00
|
Firewall - Fit parts on firewall, Part 2.
|
Details
|
|
|
01-18-2009
|
0.00
|
Firewall - Fit parts on firewall, Part 1.
|
Details
|
|
|
01-17-2009
|
0.00
|
Firewall - Debur firewall.
|
Details
|
|
|
01-16-2009
|
0.00
|
Firewall - Make the 601J's, Part 2.
|
Details
|
|
|
01-15-2009
|
0.00
|
Firewall - Make the 601J's, Part 1.
|
Details
|
|
|
01-14-2009
|
0.00
|
Washer Wrench Set
|
Details
|
|
|
01-14-2009
|
0.00
|
Emery cloth from Harbor Frieght.
|
Details
|
|
|
01-13-2009
|
0.00
|
Fuselage - Organize hardware part 2.
|
Details
|
|
|
01-12-2009
|
0.00
|
Fuselage - Organize hardware part 1.
|
Details
|
|
|
01-06-2009
|
0.00
|
Fuselage - Box contents.
|
Details
|
|
|
01-05-2009
|
0.00
|
Fuselage - Open the fuselage box.
|
Details
|
|
|
01-04-2009
|
0.00
|
Aileron - Assemble aileron bellcrank.
|
Details
|
|
|
01-03-2009
|
0.00
|
1/4" Reamer.
|
Details
|
|
|
01-02-2009
|
0.00
|
Aileron - Rivet aileron push tube.
|
Details
|
|
|
01-02-2009
|
0.00
|
Aileron - Primmed push tubes
|
Details
|
|
|
01-01-2009
|
0.00
|
Aileron - Drill aileron push tube.
|
Details
|
|
|
12-31-2008
|
0.00
|
Aileron - Drill/rivet stick push tube.
|
Details
|
|
|
12-30-2008
|
0.00
|
Aileron - Prime inside of control tubes.
|
Details
|
|
|
12-29-2008
|
0.00
|
Aileron - Cut pushrod tubes.
|
Details
|
|
|
12-28-2008
|
0.00
|
WOW, Visit to Vans' to pickup fuselage.
|
Details
|
|
|
12-27-2008
|
0.00
|
Flap - Buck rivet flap main spar to skins.
|
Details
|
|
|
12-26-2008
|
0.00
|
Flap - Pop rivet flap main spar to ribs.
|
Details
|
|
|
12-25-2008
|
0.00
|
Flap - Rivet flap skins. Part 2.
|
Details
|
|
|
12-24-2008
|
0.00
|
Flap - Rivet flap skins. Part 1.
|
Details
|
|
|
12-23-2008
|
0.00
|
Flap - Build flap rivet stand.
|
Details
|
|
|
12-22-2008
|
0.00
|
Flap - Rivet ribs to rear spar.
|
Details
|
|
|
12-21-2008
|
0.00
|
Flap - Rivet rib and spar doublers.
|
Details
|
|
|
12-20-2008
|
0.00
|
Flap - Prime flap parts.
|
Details
|
|
|
12-19-2008
|
0.00
|
Flap - Dimple and prep for primer.
|
Details
|
|
|
12-18-2008
|
0.00
|
Flap - Drill rod end bearing platenut attach holes
|
Details
|
|
|
12-17-2008
|
0.00
|
Flap - Enlarge for rod end bearing.
|
Details
|
|
|
12-16-2008
|
0.00
|
Flap - Trim spar doubler.
|
Details
|
|
|
12-15-2008
|
0.00
|
Flap - Drill rib/spar doublers. Part 2.
|
Details
|
|
|
12-14-2008
|
0.00
|
Flap - Drill rib/spar doublers.
|
Details
|
|
|
12-13-2008
|
0.00
|
Flap - Make spar and rib doubler plates.
|
Details
|
|
|
12-12-2008
|
0.00
|
Flap - Counter sink flap spar on hinge side.
|
Details
|
|
|
12-11-2008
|
0.00
|
Flap - Drill flap piano hinge. Part 2.
|
Details
|
|
|
12-10-2008
|
0.00
|
Flap - Drill flap piano hinge.
|
Details
|
|
|
12-09-2008
|
0.00
|
Flap - Match drill, make shims.
|
Details
|
|
|
12-08-2008
|
0.00
|
Flap - Drill rib to rear spar part 2.
|
Details
|
|
|
12-07-2008
|
0.00
|
Flap - Drill rib to rear spar.
|
Details
|
|
|
12-06-2008
|
0.00
|
Flap - Drill ribs to spar, make shims.
|
Details
|
|
|
12-05-2008
|
0.00
|
Flap - Smooth spar, rib and skin edges.
|
Details
|
|
|
12-04-2008
|
0.00
|
Re-dimple wing access plated.
|
Details
|
|
|
12-03-2008
|
0.00
|
Bottom Skin Prepare part 3.
|
Details
|
|
|
12-02-2008
|
0.00
|
Bottom Skin Prepare part 2.
|
Details
|
|
|
12-01-2008
|
0.00
|
Bottom Skin Prepare.
|
Details
|
|
|
11-27-2008
|
0.00
|
Harbor Freight Puller ground down.
|
Details
|
|
|
11-26-2008
|
0.00
|
Clean shop pictures.
|
Details
|
|
|
11-25-2008
|
0.00
|
Clean and organize shop. Over due.
|
Details
|
|
|
11-24-2008
|
0.00
|
Clear a space in garage for wing storage.
|
Details
|
|
|
11-02-2008
|
0.00
|
Aileron - Joyce helps to mount ailerons.
|
Details
|
|
|
11-01-2008
|
0.00
|
AIleron - fit aileron to wing.
|
Details
|
|
|
10-31-2008
|
0.00
|
Aileron - Final riveting.
|
Details
|
|
|
10-30-2008
|
0.00
|
Aileron - Center 4 skin rivets to spar.
|
Details
|
|
|
10-29-2008
|
0.00
|
Aileron - Rivet skin top top of spar.
|
Details
|
|
|
10-28-2008
|
0.00
|
Aileron - Make secure stand for aileron.
|
Details
|
|
|
10-27-2008
|
0.00
|
Aileron - Rivet aileron skeleton.
|
Details
|
|
|
10-26-2008
|
0.00
|
Tungstun Bucking Bar
|
Details
|
|
|
10-25-2008
|
0.00
|
Aileron - Test fit rivet in water pipe dimple.
|
Details
|
|
|
10-24-2008
|
0.00
|
Aileron - Dimple skin on top of water pipe weight.
|
Details
|
|
|
10-23-2008
|
0.00
|
Aileron - Machine counter sink water pipe.
|
Details
|
|
|
10-22-2008
|
0.00
|
2 differnt edge rolling tools.
|
Details
|
|
|
10-21-2008
|
0.00
|
Aileron - Debur, dimple.
|
Details
|
|
|
10-20-2008
|
0.00
|
Aileron - Drill water pipe through nose flange.
|
Details
|
|
|
10-19-2008
|
0.00
|
Aileron - Cleco on skins and match drill.
|
Details
|
|
|
10-18-2008
|
0.00
|
Aileron - Cleco skeleton together.
|
Details
|
|
|
10-17-2008
|
0.00
|
Aileron - Enlarge spar holes from #30 to #12.
|
Details
|
|
|
10-16-2008
|
0.00
|
Aileron - Prime aileron parts.
|
Details
|
|
|
10-16-2008
|
0.00
|
Aileron - Match drill spar doublers and debur.
|
Details
|
|
|
10-15-2008
|
0.00
|
Aileron - Skin/Rib misalignment.
|
Details
|
|
|
10-14-2008
|
0.00
|
Aileron - Final trailing edge skin bend.
|
Details
|
|
|
10-13-2008
|
0.00
|
Aileron - Back rivet stiffeners.
|
Details
|
|
|
10-12-2008
|
0.00
|
Aileron - Match drill and dimple aileron stiffener
|
Details
|
|
|
10-11-2008
|
0.00
|
Aileron - Make aileron stiffeners.
|
Details
|
|
|
10-10-2008
|
0.00
|
Rivet Aileron hinge brackets to rear spar.
|
Details
|
|
|
10-09-2008
|
0.00
|
Rivet aileron hinge brackets.
|
Details
|
|
|
10-08-2008
|
0.00
|
Prep the aileron hinge brackets.
|
Details
|
|
|
10-07-2008
|
0.00
|
Fit problem with the aleron hinge brackets.
|
Details
|
|
|
10-06-2008
|
0.00
|
Squeeze inboard top main wing skins.
|
Details
|
|
|
10-05-2008
|
0.00
|
Squeeze trailing edge top main wing skins.
|
Details
|
|
|
10-04-2008
|
0.00
|
Both wings in cradle.
|
Details
|
|
|
10-03-2008
|
0.00
|
Moved wings to cradle.
|
Details
|
|
|
10-02-2008
|
0.00
|
Finished back riveting the top main wing skins.
|
Details
|
|
|
10-01-2008
|
0.00
|
Rivet top main wing skins.
|
Details
|
|
|
09-30-2008
|
0.00
|
Tank/Leading Edge Pucker. AGAIN.
|
Details
|
|
|
09-29-2008
|
0.00
|
Mindy and Abby
|
Details
|
|
|
09-28-2008
|
0.00
|
Wing Storage Cradle, Part 2.
|
Details
|
|
|
09-27-2008
|
0.00
|
Wing Storage Cradle, Part 1.
|
Details
|
|
|
09-26-2008
|
0.00
|
Rivet top main wing skins
|
Details
|
|
|
09-25-2008
|
0.00
|
Dimpled top wing skins.
|
Details
|
|
|
09-24-2008
|
0.00
|
Wing skin scarf joint.
|
Details
|
|
|
09-23-2008
|
0.00
|
LE/tank skin mis alaignment Fix.
|
Details
|
|
|
09-22-2008
|
0.00
|
LE/tank skin mis alaignment.
|
Details
|
|
|
09-21-2008
|
0.00
|
Leading edge rivet skin to main spar flange
|
Details
|
|
|
09-20-2008
|
0.00
|
Leading edge rib flange rivet to spar.
|
Details
|
|
|
09-19-2008
|
0.00
|
Final mounting of landing/taxi light.
|
Details
|
|
|
09-18-2008
|
0.00
|
Tank leak test results. Part3.
|
Details
|
|
|
09-17-2008
|
0.00
|
Tank leak test procedure. Part2.
|
Details
|
|
|
09-16-2008
|
0.00
|
Tank leak test preparation. Part1.
|
Details
|
|
|
09-15-2008
|
0.00
|
Casey and Lisa visit.
|
Details
|
|
|
09-14-2008
|
0.00
|
Drill LE hole for wing tiedown
|
Details
|
|
|
09-13-2008
|
0.00
|
Remove plastic from main wing skins.
|
Details
|
|
|
09-12-2008
|
0.00
|
Rivet main wing spar mystery holes.
|
Details
|
|
|
09-12-2008
|
0.00
|
Less dimples main wing ribs.
|
Details
|
|
|
09-12-2008
|
0.00
|
Are tanks leak free.
|
Details
|
|
|
09-11-2008
|
0.00
|
Seal tank inspection plate.
|
Details
|
|
|
09-10-2008
|
0.00
|
Seal tank rear baffle, Part 3.
|
Details
|
|
|
09-09-2008
|
0.00
|
Seal tank rear baffle, Part 2.
|
Details
|
|
|
09-08-2008
|
0.00
|
Seal tank rear baffle, Part 1.
|
Details
|
|
|
09-07-2008
|
0.00
|
First fit of leading edge and tank.
|
Details
|
|
|
09-06-2008
|
0.00
|
Install DuckWorks landing lights. Part 4
|
Details
|
|
|
09-05-2008
|
0.00
|
Leading edge riveting. Part 2.
|
Details
|
|
|
09-04-2008
|
0.00
|
Leading edge riveting. Part 1.
|
Details
|
|
|
09-03-2008
|
0.00
|
Prime leading edge ribs, skins and joint-plates.
|
Details
|
|
|
09-02-2008
|
0.00
|
Landing light bracket attach plate-nuts.
|
Details
|
|
|
09-01-2008
|
0.00
|
Leading edge joint plate, Part3.
|
Details
|
|
|
09-01-2008
|
0.00
|
Leading edge joint plate, Part2.
|
Details
|
|
|
09-01-2008
|
0.00
|
Leading edge joint plate, Part1.
|
Details
|
|
|
08-31-2008
|
0.00
|
DRDT-2 Dimple table
|
Details
|
|
|
08-30-2008
|
0.00
|
Prep leading edge for riveting.
|
Details
|
|
|
08-29-2008
|
0.00
|
Install DuckWorks landing lights. Part 3
|
Details
|
|
|
08-28-2008
|
0.00
|
Install DuckWorks landing lights. Part 2
|
Details
|
|
|
08-27-2008
|
0.00
|
Install DuckWorks landing lights. Part 1
|
Details
|
|
|
08-26-2008
|
0.00
|
Tank - Prep tank baffle's
|
Details
|
|
|
08-25-2008
|
0.00
|
Debur and dimple main wing skins.
|
Details
|
|
|
08-24-2008
|
0.00
|
Tank - Pre baffle seal, Inspection part 6
|
Details
|
|
|
08-24-2008
|
0.00
|
Tank - Pre baffle seal, Inspection part 5
|
Details
|
|
|
08-23-2008
|
0.00
|
Tank - Pre baffle seal, Inspection part 4
|
Details
|
|
|
08-23-2008
|
0.00
|
Tank - Pre baffle seal, Inspection part 3
|
Details
|
|
|
08-22-2008
|
0.00
|
Tank - Pre baffle seal, Inspection part 2
|
Details
|
|
|
08-22-2008
|
0.00
|
Tank - Pre baffle seal, Inspection part 1
|
Details
|
|
|
08-21-2008
|
0.00
|
$5.00 rivet puller to distroy.
|
Details
|
|
|
08-20-2008
|
0.00
|
Tank - Outboard tank rib installed.
|
Details
|
|
|
08-19-2008
|
0.00
|
Tank - Inboard tank rib installed. Right.
|
Details
|
|
|
08-18-2008
|
0.00
|
Tank - Inboard tank rib installed. Left.
|
Details
|
|
|
08-17-2008
|
0.00
|
Tank - Inboard rib, inspection plate flange Pro-Se
|
Details
|
|
|
08-16-2008
|
0.00
|
Tank - fuel gate, dam, flop tube bracket. Right.
|
Details
|
|
|
08-15-2008
|
0.00
|
Tank - fuel gate, dam, flop tube bracket. Left.
|
Details
|
|
|
08-14-2008
|
0.00
|
Tank inboard bay showing flaired tube ends.
|
Details
|
|
|
08-13-2008
|
0.00
|
Tank - 3rd bay fuel return tube.
|
Details
|
|
|
08-12-2008
|
0.00
|
Tank - Capacitance fuel sender, Right.
|
Details
|
|
|
08-11-2008
|
0.00
|
Tank - Capacitance fuel sender, Left.
|
Details
|
|
|
08-10-2008
|
0.00
|
Tank - Fuel cap flange sealed.
|
Details
|
|
|
08-09-2008
|
0.00
|
Pro-Sealed a few tank things
|
Details
|
|
|
08-08-2008
|
0.00
|
Torque and wire wrap flop tubes.
|
Details
|
|
|
08-08-2008
|
0.00
|
tank end ribs and parts cleaned with M.E.K.
|
Details
|
|
|
08-07-2008
|
0.00
|
Mock up tank end ribs. Bend/flair tubing.
|
Details
|
|
|
08-06-2008
|
0.00
|
Rivet tank ribs part 3.
|
Details
|
|
|
08-05-2008
|
0.00
|
Rivet tank ribs part 2.
|
Details
|
|
|
08-04-2008
|
0.00
|
Rivet tank ribs part 1.
|
Details
|
|
|
08-03-2008
|
0.00
|
Mindy prepairs to help rivet tank ribs.
|
Details
|
|
|
08-02-2008
|
0.00
|
Prepare to rivet fuel tank rib.
|
Details
|
|
|
08-01-2008
|
0.00
|
Rivet fuel tank ribs.
|
Details
|
|
|
07-30-2008
|
0.00
|
Rivet fuel tank drain flange.
|
Details
|
|
|
07-30-2008
|
0.00
|
Prep tank for fuel cap flange.
|
Details
|
|
|
07-29-2008
|
0.00
|
Plug center hole in second tank rib.
|
Details
|
|
|
07-29-2008
|
0.00
|
Drill holes in ribs for fuel/vapor return.
|
Details
|
|
|
07-29-2008
|
0.00
|
Clean tank ribs before installing.
|
Details
|
|
|
07-28-2008
|
0.00
|
Socket head screws for inspection plate.
|
Details
|
|
|
|
07-28-2008
|
0.00
|
More tank rib preparation.
|
Details
|
|
|
07-27-2008
|
0.00
|
Rivet tank stiffeners Part 3
|
Details
|
|
|
07-27-2008
|
0.00
|
Abby decorates my part cans.
|
Details
|
|
|
07-26-2008
|
0.00
|
Rivet tank stiffeners Part 2
|
Details
|
|
|
07-25-2008
|
0.00
|
First Pro-Seal adventure.
|
Details
|
|
|
07-24-2008
|
0.00
|
Shopped for Pro-Seal supplys.
|
Details
|
|
|
07-23-2008
|
0.00
|
Dimple tank skins
|
Details
|
|
|
07-22-2008
|
0.00
|
Remove blue protection from fuel tank.
|
Details
|
|
|
07-21-2008
|
0.00
|
Rough up ribs and dimple.
|
Details
|
|
|
07-21-2008
|
0.00
|
Mindy Deburs fuel tank ribs.
|
Details
|
|
|
07-21-2008
|
0.00
|
Label, final drill tank stiffeners.
|
Details
|
|
|
07-21-2008
|
0.00
|
Drill doubler plate in fuel tank outboard rib.
|
Details
|
|
|
07-21-2008
|
0.00
|
Debur, rough up and dimple.
|
Details
|
|
|
07-21-2008
|
0.00
|
Anti flop tube jam guard
|
Details
|
|
|
07-20-2008
|
0.00
|
One way gas tank door fabrication.
|
Details
|
|
|
07-19-2008
|
0.00
|
Add anti flop tube hang up strap.
|
Details
|
|
|
07-18-2008
|
0.00
|
Match drill fuel drain valve housing.
|
Details
|
|
|
07-17-2008
|
0.00
|
Fuel cap fent line vent clip fabrication.
|
Details
|
|
|
07-16-2008
|
0.00
|
Drill fuel cap to skin
|
Details
|
|
|
07-15-2008
|
0.00
|
Drill the 9/16" hole through T-405.
|
Details
|
|
|
07-14-2008
|
0.00
|
Drill the T-405 rivet holes.
|
Details
|
|
|
07-13-2008
|
0.00
|
Trim T-405 Tank Attach Angle.
|
Details
|
|
|
07-12-2008
|
0.00
|
Rivet Gase Tank Inspection Plate Reforcement Ring.
|
Details
|
|
|
07-11-2008
|
0.00
|
Prepare gase tank inspection plate.
|
Details
|
|
|
07-10-2008
|
0.00
|
Drill gase tank cover plate attach holes.
|
Details
|
|
|
07-09-2008
|
0.00
|
Abby shows off the BNC and Vent hardware.
|
Details
|
|
|
07-08-2008
|
0.00
|
Cut out the inspection plate hole.
|
Details
|
|
|
07-07-2008
|
0.00
|
Gas Tank End RIb Holes
|
Details
|
|
|
03-27-2008
|
0.00
|
Steve gets his test flight. Part 3.
|
Details
|
|
|
03-26-2008
|
0.00
|
Steve gets his test flight. Part 2.
|
Details
|
|
|
03-25-2008
|
0.00
|
Steve gets his test flight. Part 1.
|
Details
|
|
|
03-24-2008
|
0.00
|
Steve works on his flap practice kit.
|
Details
|
|
|
03-23-2008
|
0.00
|
Capacitance Fuel Sender, Part 4.
|
Details
|
|
|
03-22-2008
|
0.00
|
Capacitance Fuel Sender, Part 3.
|
Details
|
|
|
03-21-2008
|
0.00
|
Capacitance Fuel Sender, Part 2.
|
Details
|
|
|
03-20-2008
|
0.00
|
Capacitance Fuel Sender, Part 1.
|
Details
|
|
|
03-19-2008
|
0.00
|
Gas tank stiffener fabrication. Part 2.
|
Details
|
|
|
03-18-2008
|
0.00
|
Gas tank stiffener fabrication. Part 1.
|
Details
|
|
|
03-17-2008
|
0.00
|
405 Tank attach angles Part 4.
|
Details
|
|
|
03-16-2008
|
0.00
|
405 Tank attach angles Part 3.
|
Details
|
|
|
03-15-2008
|
0.00
|
405 Tank attach angles Part 2.
|
Details
|
|
|
03-14-2008
|
0.00
|
405 Tank attach angles Part 1.
|
Details
|
|
|
03-13-2008
|
0.00
|
Machine counter sink gas tank.
|
Details
|
|
|
03-12-2008
|
0.00
|
Abby wants to build a tresure chest.
|
Details
|
|
|
03-11-2008
|
0.00
|
Pneumatic Cleco Tool
|
Details
|
|
|
03-10-2008
|
0.00
|
Mount Gas Tank Part 3
|
Details
|
|
|
03-09-2008
|
0.00
|
Mount Gas Tank Part 2
|
Details
|
|
|
03-08-2008
|
0.00
|
Mount Gas Tank Part 1
|
Details
|
|
|
03-07-2008
|
0.00
|
Inboard Wing, Tank Z Bracket, Nut Plates, part 2
|
Details
|
|
|
03-06-2008
|
0.00
|
Inboard Wing, Tank Z Bracket, Nut Plates.
|
Details
|
|
|
03-05-2008
|
0.00
|
DRDT-2 VS C-Frame
|
Details
|
|
|
03-04-2008
|
0.00
|
Gas Tank Z Bracket Prep Part 4.
|
Details
|
|
|
03-03-2008
|
0.00
|
Gas Tank Z Bracket Prep Part 3.
|
Details
|
|
|
03-02-2008
|
0.00
|
Gas Tank Z Bracket Prep Part 2.
|
Details
|
|
|
03-01-2008
|
0.00
|
Gas Tank Z Bracket Prep Part 1.
|
Details
|
|
|
02-29-2008
|
0.00
|
Gas tank Z bracket prep begins. A
|
Details
|
|
|
02-28-2008
|
0.00
|
Cleco ribs in gas tank skins. Part 2.
|
Details
|
|
|
02-27-2008
|
0.00
|
Cleco ribs in gas tank skins.
|
Details
|
|
|
02-26-2008
|
0.00
|
Install leading edge/gas tank joint plate.
|
Details
|
|
|
02-25-2008
|
0.00
|
More pictures of leading edge on wing.
|
Details
|
|
|
02-24-2008
|
0.00
|
More pictures of leading edge on wing.
|
Details
|
|
|
02-23-2008
|
0.00
|
Leading edge fits on wing.
|
Details
|
|
|
02-22-2008
|
0.00
|
Made a leading edge craddle.
|
Details
|
|
|
02-21-2008
|
0.00
|
Cleco and drill wing skins.
|
Details
|
|
|
02-19-2008
|
0.00
|
Trimmed and drilled the wing walk doubler plate.
|
Details
|
|
|
02-15-2008
|
0.00
|
Wing jig, out board rear spar.
|
Details
|
|
|
02-15-2008
|
0.00
|
Wing jig, out board main spar.
|
Details
|
|
|
02-15-2008
|
0.00
|
Wing jig, in board rear spar.
|
Details
|
|
|
02-15-2008
|
0.00
|
Wing jig, in board main spar.
|
Details
|
|
|
02-15-2008
|
0.00
|
Wing jig, general
|
Details
|
|
|
02-15-2008
|
0.00
|
Wing jig, center support.
|
Details
|
|
|
02-15-2008
|
0.00
|
Replaced doublers on wing rear spar.
|
Details
|
|
|
02-13-2008
|
0.00
|
Rivet wing rear spar to ribs.
|
Details
|
|
|
02-12-2008
|
0.00
|
Finished riveting wins ribs to main spar.
|
Details
|
|
|
02-11-2008
|
0.00
|
Rivet wing main ribs to main spar.
|
Details
|
|
|
02-09-2008
|
0.00
|
Prime wing main ribs.
|
Details
|
|
|
02-08-2008
|
0.00
|
Clean the wing ribs to prepare for priming.
|
Details
|
|
|
02-08-2008
|
0.00
|
Asked kids to help with rib cleaning.
|
Details
|
|
|
02-07-2008
|
0.00
|
Scotch bright all main wing ribs.
|
Details
|
|
|
02-06-2008
|
0.00
|
Drilled holes in wing ribs for wires.
|
Details
|
|
|
02-05-2008
|
0.00
|
Added a table to my little drill press.
|
Details
|
|
|
02-04-2008
|
0.00
|
Fix tip end of main spar to jig.
|
Details
|
|
|
01-30-2008
|
0.00
|
Straighten wing ribs with vise grip flute tool.
|
Details
|
|
|
01-30-2008
|
0.00
|
Mobile grinder station.
|
Details
|
|
|
01-30-2008
|
0.00
|
Dust hoods on tools.
|
Details
|
|
|
01-30-2008
|
0.00
|
Dust hood on belt sander.
|
Details
|
|
|
01-30-2008
|
0.00
|
Debur wing rib flange ends
|
Details
|
|
|
01-29-2008
|
0.00
|
Wing nose rib flange bump.
|
Details
|
|
|
01-29-2008
|
0.00
|
Debur wig rib edge flanges.
|
Details
|
|
|
01-28-2008
|
0.00
|
Organize Wing Ribs.
|
Details
|
|
|
01-28-2008
|
0.00
|
Adjust wing rib flange to web.
|
Details
|
|
|
01-27-2008
|
0.00
|
Rivet WIng Rear Spar
|
Details
|
|
|
01-26-2008
|
0.00
|
Dust Collection System Continued.
|
Details
|
|
|
01-26-2008
|
0.00
|
Dust Collection System
|
Details
|
|
|
01-23-2008
|
0.00
|
Tie down and rear spar primmed.
|
Details
|
|
|
01-22-2008
|
0.00
|
Prime wing tie down and rear spar.
|
Details
|
|
|
01-21-2008
|
0.00
|
Drill rear spar doubler plate hole.
|
Details
|
|
|
01-20-2008
|
0.00
|
Wing rear spar preperation.
|
Details
|
|
|
01-20-2008
|
0.00
|
Rear spar fork prep.
|
Details
|
|
|
01-19-2008
|
0.00
|
Wing hardware.
|
Details
|
|
|
01-18-2008
|
0.00
|
A draw full of rivets.
|
Details
|
|
|
01-17-2008
|
0.00
|
Wing tie down work.
|
Details
|
|
|
01-17-2008
|
0.00
|
Wing tie down spacers.
|
Details
|
|
|
01-16-2008
|
0.00
|
Main spar nut plates installed.
|
Details
|
|
|
01-15-2008
|
0.00
|
More main spar nut plates.
|
Details
|
|
|
01-14-2008
|
0.00
|
Main Spar Nut Plates
|
Details
|
|
|
01-11-2008
|
0.00
|
Open those wing boxes.
|
Details
|
|
|
01-10-2008
|
0.00
|
Picture inside the vertical stabalizer.
|
Details
|
|
|
01-10-2008
|
0.00
|
Fit the rudder to vertical stabalizer.
|
Details
|
|
|
01-09-2008
|
0.00
|
Rolling elevator leading edge continued.
|
Details
|
|
|
01-08-2008
|
0.00
|
Rolling leading edge of elevators.
|
Details
|
|
|
01-07-2008
|
0.00
|
Rolling Rudder Leading Edge
|
Details
|
|
|
12-27-2007
|
0.00
|
Drill and rivet on the elevator trim tab.
|
Details
|
|
|
12-26-2007
|
0.00
|
Time to close the elevator skins.
|
Details
|
|
|
12-26-2007
|
0.00
|
Elevators ready to be riveted.
|
Details
|
|
|
12-25-2007
|
0.00
|
Paint over spray sucker upper.
|
Details
|
|
|
12-24-2007
|
0.00
|
New down draft paint booth
|
Details
|
|
|
12-13-2007
|
0.00
|
Prime elevator trim tab parts
|
Details
|
|
|
12-12-2007
|
0.00
|
Clamp doen the elevator trim tab.
|
Details
|
|
|
12-12-2007
|
0.00
|
Bend the elevator trim tab.
|
Details
|
|
|
12-10-2007
|
0.00
|
Time to smack on the elevator tim tabs.
|
Details
|
|
|
12-09-2007
|
0.00
|
Becning those left elevator tabs.
|
Details
|
|
|
12-08-2007
|
0.00
|
House I almost bought.
|
Details
|
|
|
12-07-2007
|
0.00
|
More elevator sleleton riveting.
|
Details
|
|
|
12-05-2007
|
0.00
|
Lets rivet the elevator skeleton
|
Details
|
|
|
12-04-2007
|
0.00
|
Primed left elevator parts.
|
Details
|
|
|
12-03-2007
|
0.00
|
Counter sink elevator parts
|
Details
|
|
|
12-02-2007
|
0.00
|
Left elevator holes drilled
|
Details
|
|
|
12-01-2007
|
0.00
|
Picked up the wing kit
|
Details
|
|
|
11-02-2007
|
0.00
|
Bending the elevator trailing edge.
|
Details
|
|
|
11-01-2007
|
0.00
|
Cleco elevator counter weight housing.
|
Details
|
|
|
10-19-2007
|
0.00
|
Prime stiffeners, rivet nutplates to trim access.
|
Details
|
|
|
10-18-2007
|
0.00
|
Drill elevator stiffeners.
|
Details
|
|
|
10-17-2007
|
0.00
|
Process the elevator trim access plate.
|
Details
|
|
|
10-16-2007
|
0.00
|
Dimple elevator stiffeners.
|
Details
|
|
|
10-14-2007
|
0.00
|
Continue with elevator stiffeners.
|
Details
|
|
|
10-12-2007
|
0.00
|
Finish the elevator stiffeners.
|
Details
|
|
|
10-11-2007
|
0.00
|
Elevator stiffeners.
|
Details
|
|
|
10-10-2007
|
0.00
|
Setting the remaing rudder edge rivets.
|
Details
|
|
|
10-09-2007
|
0.00
|
Rudder control hord and counter weight.
|
Details
|
|
|
10-08-2007
|
0.00
|
Prepare rudder edge rivets holes.
|
Details
|
|
|
10-07-2007
|
0.00
|
Rudder skeleton.
|
Details
|
|
|
10-06-2007
|
0.00
|
Cleaco every other hole, then drill.
|
Details
|
|
|
10-05-2007
|
0.00
|
Makeing rudder stiffeners.
|
Details
|
|
|
10-04-2007
|
0.00
|
Some bad rivets on the VS Rear Spar lower hinge.
|
Details
|
|
|
10-03-2007
|
0.00
|
Riveting up the VS skin.
|
Details
|
|
|
10-02-2007
|
0.00
|
Final assembly of the VS Skeleton
|
Details
|
|
|
10-01-2007
|
0.00
|
Priming the Vertical Stabalizer, VS
|
Details
|
|
|
09-25-2007
|
0.00
|
Skin is on and all skin holes final drilled.
|
Details
|
|
|
09-24-2007
|
0.00
|
The start of the VS vertical stabalizer.
|
Details
|
|
|
09-24-2007
|
0.00
|
Comleted the HS.
|
Details
|
|
|
09-23-2007
|
0.00
|
All HS rivets bucked.
|
Details
|
|
|
09-11-2007
|
0.00
|
Clecoed the left skin back on.
|
Details
|
|
|
09-10-2007
|
0.00
|
HS Skeleton taking shape
|
Details
|
|
|
09-05-2007
|
0.00
|
HS front spar riveted.
|
Details
|
|
|
09-04-2007
|
0.00
|
Finally, a completed sub assembly. HS Rear Spar
|
Details
|
|
|
09-03-2007
|
0.00
|
Primed the HS parts
|
Details
|
|
|
09-02-2007
|
0.00
|
HS degreased and laid out for priming.
|
Details
|
|
|
09-01-2007
|
0.00
|
I make a bunch of part paint hangers.
|
Details
|
|
|
08-31-2007
|
0.00
|
Mindy now dimples the HS spars.
|
Details
|
|
|
08-30-2007
|
0.00
|
Mindy has fun dimpling.
|
Details
|
|
|
08-29-2007
|
0.00
|
Another prep step on skeleton, debur and polish.
|
Details
|
|
|
08-28-2007
|
0.00
|
All HS holes are drilled. Clecoed every other hole
|
Details
|
|
|
08-27-2007
|
0.00
|
Right side of HS clecoed together.
|
Details
|
|
|
08-27-2007
|
0.00
|
Finally looks like an airplane part.
|
Details
|
|
|
08-22-2007
|
0.00
|
Romeve protective plastic at rivet locations.
|
Details
|
|
|
08-21-2007
|
0.00
|
Making of the Hor. Stab. skin sqeezers.
|
Details
|
|
|
08-20-2007
|
0.00
|
Horizontal Stabalizer work jig.
|
Details
|
|
|
08-19-2007
|
0.00
|
Horizontal stabalizer front spar channels.
|
Details
|
|
|
08-18-2007
|
0.00
|
Horizontal stabalizer front spar supports.
|
Details
|
|
|
08-17-2007
|
0.00
|
Rear main spar of the Horizontal Stabalizer.
|
Details
|
|
|
08-16-2007
|
0.00
|
Empennage unpacked and shelved.
|
Details
|
|
|
08-15-2007
|
0.00
|
The Shop
|
Details
|
|
|
08-15-2007
|
0.00
|
The compressor, Husky Pro from Home Depot.
|
Details
|
|
