KitLog pro

Powered By Kitlog Pro v2.0

Steves S-20 Build Site.
Work Logs Found: 197
Category Work Time: 1269 Hours
 Date
Hours
Work Log Summary

Details

 05-20-2019
3.00
Silicone the Windows
Details
       

 05-19-2019
2.00
Put oil in the engine. schedule to first flight
Details

 05-18-2019
6.00
Painted Station 3 closeout.
Details
       

 05-17-2019
8.00
Fit up and painted wing cuffs.
Details
       

 05-12-2019
8.00
Install windscreen and skylight!
Details
       

 05-07-2019
3.00
Add door strikes.
Details
       

 05-06-2019
2.00
Installed the prop and wing tips.
Details
       

 05-05-2019
4.00
Painted the windshield hold down strips.
Details
       

 05-03-2019
3.00
Paint the spinner and wing tips.
Details
       

 05-02-2019
1.00
Raven decal on the tail!
Details
       

 04-23-2019
3.00
Fit up the station 3 closeout.
Details
       

 04-17-2019
2.00
Fit Up Root Gap Seals.
Details
       

 04-14-2019
6.00
Installing the Glareshield Pad.
Details
       

 04-11-2019
3.00
Flap Fillet Seals and Trim the Skylight
Details
       

 04-07-2019
6.00
Fit up the skylight.
Details
       

 04-06-2019
4.00
Installing Skylight Ribs
Details
       

 04-02-2019
3.00
Wiring - Wing Tips, Thermocouple, Compass.
Details
     

 03-30-2019
6.00
Fit up of Windshield.
Details
       

 03-26-2019
3.00
Jury Struts.
Details
       

 03-24-2019
6.00
Installed the Wings!
Details
       

 03-20-2019
5.00
Assembly of Wing Struts.
Details
       

 03-18-2019
2.00
Getting wings ready for mounting.
Details
       

 03-16-2019
6.00
Wing Tips.
Details
       

 03-15-2019
4.00
Covering the Root End Close Outs.
Details
       

 03-14-2019
4.00
Made Root Close Out Panels.
Details
       

 03-03-2019
6.00
Painting of Gap Seals and Close Outs.
Details
       

 02-24-2019
1.00
Fitting of the flap cable closeout.
Details
       

 02-23-2019
6.00
Fit the Flap Gap Seals
Details
       

 02-22-2019
6.00
Install Flaps and Ailerons.
Details
       

 02-17-2019
2.00
Install Baggage Windows and Arrange Shop.
Details
       

 02-16-2019
8.00
Install Doors.
Details
       

 02-15-2019
2.00
Install Seatbelts and Aileron Pulleys.
Details
       

 02-15-2019
3.00
Copilot Fuel Line / Low Fuel Sensor.
Details
       

 02-14-2019
2.00
Spinner and Pilot Side Fuel Line.
Details
       

 02-12-2019
5.00
Finishing Up The Engine Install.
Details
       

 02-04-2019
8.00
Sand and Buff the Cowl.
Details
       

 02-02-2019
10.00
Painted the Cowl.
Details
       

 01-28-2019
5.00
Priming the Cowl.
Details
       

 01-21-2019
5.00
Cowl Details
Details
       

 01-15-2019
4.00
Oil Door
Details
       

 01-12-2019
2.00
Landing Light Mount
Details
       

 01-06-2019
5.00
Upper Cowl
Details
       

 01-05-2019
5.00
Lower Cowl
Details
       

 01-01-2019
2.00
Rivet Upper Boot Cowl.
Details
       

 12-30-2018
3.00
Rivet lower half of boot cowl.
Details
       

 12-29-2018
3.00
Misc Tasks - Cont'd.
Details
       

 12-27-2018
2.00
Misc Tasks - Cont'd
Details
       

 12-26-2018
2.00
Misc Tasks
Details
       

 12-18-2018
10.00
Painting again!
Details
       

 12-04-2018
10.00
New Paint Booth (Area?)
Details
       

 11-18-2018
2.00
Trimming of the Boot Cowl.
Details
       

 11-17-2018
2.00
Map Pockets and Carpeting
Details
       

 10-30-2018
4.00
Brakes, Rudder Travel, and Baggage.
Details
       

 10-19-2018
2.00
Control stick travel, elevator autopilot.
Details
       

 10-18-2018
4.00
Plastic parts, tail braces, and elevator travel.
Details
       

 10-10-2018
3.00
Dynon up and running!
Details
       

 10-01-2018
5.00
Headsets and Plastic Parts.
Details
       

 09-25-2018
2.00
Misc Interior Stuff.
Details
       

 09-23-2018
3.00
Boot Rings and USB ports
Details
       

 09-18-2018
4.00
Covered Interior Panels.
Details
       

 09-09-2018
3.00
Added Fire Extingusher.
Details
       

 08-29-2018
4.00
Continued Interior Panels
Details
       

 08-17-2018
6.00
Interior Panels
Details
       

 07-30-2018
6.00
Baggage Compartment Fabric.
Details
       

 07-22-2018
3.00
New ADSB and drain lines.
Details
       

 01-14-2018
2.00
USB Mount.
Details
       

 10-31-2017
5.00
Auxiliary oil cooler.
Details
       

 03-15-2017
10.00
Mounting of misc items
Details
       

 03-13-2017
10.00
Auto Pilot Servos.
Details
       

 02-21-2017
5.00
Install the cabin heater.
Details
       

 02-21-2017
10.00
Assemble and mount rudder pedals.
Details
       

 02-06-2017
6.00
Populate the panel.
Details
       

 02-06-2017
1.00
Panel fit.
Details
       

 01-28-2017
20.00
Cut the panel.
Details
       

 01-27-2017
2.00
Mounting the engine.
Details
       

 01-27-2017
2.00
Coolant hoses and Misc.
Details
       

 01-07-2017
5.00
Mounted the rudder and elevators.
Details
       

 12-11-2016
10.00
Paianting the doors.
Details
       

 11-13-2016
2.00
Trim door for fit.
Details
       

 11-12-2016
6.00
Fixing front door strip.
Details
       

 11-11-2016
6.00
Fixing the door strips. - Part 4.
Details
       

 11-10-2016
6.00
Fixing the door strips. - Part 3.
Details
       

 11-09-2016
6.00
Fixing the door strips. - Part 2.
Details
       

 11-08-2016
6.00
Fixing the door strips. - Part 1.
Details
       

 11-07-2016
0.10
Life gets in the way.
Details
       

 11-06-2016
15.00
Painted The Ailerons.
Details
       

 11-05-2016
3.00
Painted and Installed Aileron Mounts.
Details
       

 10-30-2016
15.00
Painting Flaps.
Details
       

 10-23-2016
20.00
Painting Remaining Wing.
Details
       

 10-16-2016
8.00
Painted the Boot Cowl and Trim Tab.
Details
       

 10-13-2016
2.00
Powder Coated Trim Tab Horn.
Details
       

 10-09-2016
20.00
Painted First Wing.
Details
       

 10-06-2016
2.00
Powder Coated Tail Spring.
Details
       

 10-02-2016
8.00
Painting Landing Gear and Glare Shield.
Details
       

 09-26-2016
44.00
Painted The Fuselage.
Details
       

 09-10-2016
12.00
Painted Rudder
Details
       

 09-04-2016
12.00
Painting the Stabilizers.
Details
       

 09-03-2016
12.00
First Painted Parts! - Elevators.
Details
       

 08-30-2016
9.00
Priming Tail Parts - Learning how to sand.
Details
       

 08-28-2016
3.00
Elevator and Stabilizer Paint Fixtures.
Details
       

 08-25-2016
3.00
Cut and Buff - The Closing Scene.
Details

 08-22-2016
2.00
Cut and Buff Lessons.
Details
       

 08-21-2016
8.00
Learning how paint - Success!
Details
       

 08-18-2016
4.00
Learning to Paint.
Details
       

 07-24-2016
10.00
Paint Booth - Part 2.
Details
       

 07-17-2016
10.00
Paint Booth - Part 1.
Details
       

 07-10-2016
20.00
Finished Covering!!!!!!!!!!!
Details
       

 06-30-2016
2.00
Fixed Wavy Tapes.
Details
       

 06-25-2016
12.00
Covered The Flaps.
Details
     

 06-15-2016
20.00
Covered The Doors.
Details
       

 06-03-2016
10.00
Finished Fuselage Tapes!
Details
       

 05-30-2016
6.00
4" Tape Along Top Former and Fin Patch.
Details
       

 05-28-2016
6.00
Tapes along the fin.
Details
       

 05-26-2016
6.00
Tapes on the Fuselage Longerons.
Details
       

 05-22-2016
10.00
More FuselageTapes.
Details
       

 05-19-2016
4.00
Fuselage Tapes.
Details
     

 05-16-2016
3.00
Ironed the Fuselage Patches and Started Tapes.
Details
       

 05-14-2016
10.00
Finished Fuselage Patches.
Details
       

 05-07-2016
10.00
Installed Fuselage Patches - Part 1.
Details
       

 05-01-2016
6.00
Installed Plastic Reinforcements On The Fuselage
Details
       

 04-30-2016
10.00
Finsh Baggage Windows and Shrink Fuselage Fabric.
Details
       

 04-24-2016
10.00
Covered RH side of fuselage.
Details
       

 04-23-2016
2.00
Clean up of LH fuselage covering.
Details
       

 04-22-2016
16.00
Built Paint Booth.
Details
       

 04-19-2016
12.00
Covered LH Side of Fuselage.
Details
       

 04-16-2016
10.00
Cover Bottom Of Fuselage.
Details
       

 04-14-2016
3.00
Plugged Fuselage Oil Leaks.
Details
       

 04-05-2016
2.00
Antenna Plate Spacer and Header Tank.
Details
       

 04-03-2016
7.00
Build Fuselage Stand.
Details
       

 03-30-2016
25.00
Wiring!
Details
       

 03-27-2016
10.00
Leading Edge Tapes.
Details
       

 03-20-2016
6.00
Tapes on the Trail and Tip Bow.
Details

 03-19-2016
8.00
Tapes for the LE Wrap and Root Ribs.
Details
       

 03-12-2016
8.00
Tapes over the rib bottoms.
Details
     

 03-06-2016
10.00
Tape over Top of Ribs.
Details
       

 03-05-2016
12.00
Wing Reinforcements and Patches.
Details
       

 02-24-2016
8.00
Prepared the wing reinforcements and patches.
Details
       

 02-21-2016
12.00
Riveted Cap Strips In Place.
Details
       

 02-19-2016
16.00
Shrink Wing Fabric and Start Cap Strip Install.
Details
       

 01-24-2016
10.00
Built Wing Stands.
Details
       

 01-20-2016
10.00
Covering Bottom of RH Wing.
Details
       

 01-16-2016
8.00
Covering Top of RH Wing.
Details
       

 01-11-2016
3.00
Created new temperature probe mount.
Details
       

 01-03-2016
12.00
Covered the bottom of the LH wing.
Details
       

 12-30-2015
3.00
Assembled Landing Gear.
Details
       

 12-29-2015
12.00
Wing Covering - Part 1
Details
       

 12-23-2015
6.00
Covering the Ailerons - Part 2.
Details
       

 12-16-2015
8.00
Covering the Ailerons - Part 1.
Details
       

 12-09-2015
12.00
Covering of the Rudder.
Details
       

 11-30-2015
15.00
Tapes and patches on the elevators.
Details
       

 11-15-2015
15.00
Covering of Elevators.
Details
       

 10-28-2015
15.00
Covering Stabilizers
Details
       

 10-21-2015
3.00
First Covering Success
Details
     

 10-07-2015
3.00
Covering Rack and Table.
Details
       

 10-04-2015
20.00
Covering The Test Frames.
Details
       

 10-01-2015
3.00
Irons!
Details
       

 09-13-2015
3.00
Boot Cowl Clean Up - Part 3.
Details
       

 09-13-2015
3.00
Boot Cowl Clean Up - Part 2.
Details
       

 09-13-2015
3.00
Boot Cowl Clean Up - Part 1.
Details
       

 09-12-2015
6.00
Cowl Mount and Instrument Panel Visor.
Details
       

 09-09-2015
4.00
Boot Cowl Top Skins
Details
       

 09-07-2015
4.00
Boot Cowl Sides - Part 2.
Details
       

 09-03-2015
3.00
Boot Cowl Sides - Part 1.
Details
       

 08-31-2015
3.00
Stored Wings and Started Boot Cowl.
Details
       

 08-23-2015
3.00
Fabricate Wing Stand.
Details
     

 08-22-2015
3.00
Run Wires For The Strobe Lights.
Details
       

 08-22-2015
4.00
Installed the Dynon Magnetometer.
Details
       

 08-22-2015
3.00
Installed Pitot Tubing.
Details
       

 08-19-2015
3.00
Teleflex, Flaps, and Trim Tab.
Details
       

 08-13-2015
5.00
Filled Glued Edges and Installed Pitot Tube.
Details
       

 08-06-2015
2.00
Stabilizer Ribs.
Details
       

 08-06-2015
2.00
Gluing The Root Skins - Part 2.
Details
       

 08-02-2015
2.00
Glued Upper Root Skins.
Details
       

 08-02-2015
2.00
Fabricated New GPS Mount.
Details
       

 08-01-2015
6.00
Gued Leading Edge Wrap.
Details
       

 07-30-2015
6.00
Tip Skins and Leading Edge Wrap.
Details
       

 07-27-2015
3.00
Install Tanks and Lower Root Skins.
Details
       

 07-16-2015
2.00
Fuel Tanks Fittings.
Details
       

 07-15-2015
4.00
Fuel Tank Caps.
Details
       

 07-11-2015
8.00
Root Skins and Fuel Tanks.
Details
       

 06-21-2015
6.00
More Wings Assembly.
Details
       

 06-20-2015
12.00
Assemble Wings
Details
       

 06-19-2015
3.00
More Wing Frames.
Details
       

 06-10-2015
6.00
Wing Frames
Details
       

 06-07-2015
6.00
Started the Wings
Details
       

 05-25-2015
6.00
Antenna Mounts
Details
       

 05-24-2015
6.00
Misc. Fuselage Tasks.
Details
       

 05-23-2015
6.00
Forward Baggage
Details
       

 05-16-2015
7.00
Aft Baggage
Details
       

 05-13-2015
7.00
Fuselage Formers
Details
       

 05-03-2015
8.00
Finished Seats
Details
       

 04-24-2015
6.00
Rib Work
Details
       

 04-20-2015
2.00
Starting Small
Details
       

 04-19-2015
9.00
Assemble Parts Board
Details
       

 04-11-2015
2.00
Unloading the kit.
Details
       

 04-10-2015
4.00
Travel to RANS to pick up kit.
Details
       

 04-04-2015
1.00
Installed Kitlog Pro
Details










Copyright © 2001-2024 Matronics. All Rights Reserved.