KitLog pro

Powered By Kitlog Pro v2.0

Matt's RV-10 Website
Work Logs Found: 371
Category Work Time: 872 Hours
 Date
Hours
Work Log Summary

Details

 10-29-2016
3.50
Condition Inspection and Data Plate
Details

 10-24-2016
1.50
First Engine Run
Details

 10-22-2016
2.50
Removed Items for Inspection
Details

 10-17-2016
1.50
Weight and Balance
Details
       

 10-16-2016
3.00
Seat Belts, Carpet
Details
       

 10-15-2016
3.00
Interior Install
Details
       

 10-14-2016
1.50
Elevator Trim, AP Servo Calibration
Details

 10-13-2016
1.00
Install Headliners
Details

 10-09-2016
6.00
Interior Install, Drain Oil
Details
       

 10-01-2016
3.00
Vinyl Letter Install, Finish Front Interior Panels
Details
       

 09-28-2016
2.00
Covered Headliners
Details
     

 09-26-2016
3.00
Rivet Baggage Panel, Front NACA Vents, Stick Grips
Details
       

 09-25-2016
2.50
Fuel Selector, Seat Supports, OH Console
Details
       

 09-24-2016
2.00
Rigging Check
Details

 09-19-2016
1.00
Pro-Seal Foward Vents and Static Ports
Details

 09-18-2016
4.00
Wing Attached Pushrods, Pitot Mast, Wiring
Details

 09-11-2016
2.00
Install Tail Items, GPS Antenna
Details
       

 09-10-2016
3.00
Rivet Upper Foward Tail Skin
Details
     

 09-03-2016
1.50
Aileron Rigging
Details

 09-02-2016
2.00
EAA Tech Visit
Details

 08-27-2016
2.00
Aileron Trim, Torque and Tie Prop
Details

 08-22-2016
2.00
Wing Attach Bolts, Install Prop and Spinner
Details

 08-21-2016
4.00
Wing Attach, Spinner
Details

 08-20-2016
1.50
Flap Sensor and Adjustment
Details

 08-19-2016
1.00
Tail Adjustments
Details

 08-14-2016
3.00
Tail Wiring
Details

 08-12-2016
2.00
Tail Rigging
Details

 08-09-2016
2.50
Wing Tip Wiring
Details

 08-08-2016
2.00
Wing Subpanel Wiring
Details

 08-07-2016
2.00
Wing Wiring, Air Line Routing
Details
       

 08-06-2016
4.00
Final Wing Attach
Details

 07-31-2016
4.00
Initial Wing Fit
Details
       

 07-23-2016
3.00
Wing Attach Preparation, HS Install
Details
       

 07-18-2016
2.00
Move to Airport
Details
       

 07-17-2016
2.00
Prepared Plane for Airport Move
Details

 07-08-2016
1.50
Windscreen Fairing
Details
     

 07-04-2016
2.00
Windscreen Fairing
Details

 07-03-2016
2.00
Windscreen Fairing
Details
     

 07-03-2016
1.50
EAA Tech Visit
Details

 07-02-2016
1.00
Windscreen Adhesive
Details

 06-28-2016
2.50
Epoxy Door Gaps
Details
     

 06-27-2016
2.00
Cut and Fit Headliner Panels
Details
       

 06-26-2016
2.00
Left Windows Adhesive
Details

 06-25-2016
1.50
Right Window Adhesive
Details
       

 06-24-2016
2.00
Install Vertical Stabilizer and Tail Wiring
Details

 06-19-2016
2.00
Bleed Brakes, Window Preparation
Details

 06-12-2016
1.50
Fit Front Interior Panel
Details

 06-06-2016
2.00
Gap Fairing, Seats, Stick Grips
Details

 06-05-2016
4.00
Wing Attach
Details
       

 06-01-2016
2.00
Baffles, Tunnel SCAT, FAB
Details
       

 05-22-2016
2.50
Various Tasks
Details

 05-19-2016
2.50
Various Tasks
Details
       

 05-18-2016
1.00
Sand and Prime Doors
Details

 05-17-2016
2.50
Various Tasks
Details
     

 05-16-2016
6.00
Smooth Prime Doors, Cowl Work
Details
     

 05-15-2016
8.00
Empennage Fairings and Wing Tips
Details
       

 05-14-2016
4.00
Rivet Upper Fuse and Emp Attach
Details
 

 05-12-2016
1.00
Door Wiring
Details

 05-11-2016
1.00
Foward Fuse Riveting
Details

 05-10-2016
1.50
Panel Brackets
Details
     

 05-09-2016
2.00
Empennage Fairings
Details
       

 05-02-2016
3.00
Panel Debugging
Details

 05-01-2016
3.00
Panel Install
Details

 04-30-2016
2.00
Battery Install
Details

 04-25-2016
2.00
Wiring
Details

 04-24-2016
6.00
EMS Wiring
Details
       

 04-23-2016
3.00
Rivet Upper Foward Fuse and Pull Wires
Details
       

 04-22-2016
1.00
Overhead Panel Wiring
Details
       

 04-20-2016
1.50
Elevator Servo Wiring
Details

 04-18-2016
3.00
Control Sticks
Details
       

 04-17-2016
1.50
Cut Front Overhead Panel
Details

 04-16-2016
2.50
Control Stick Wiring
Details

 04-12-2016
1.50
Wiring
Details

 04-11-2016
4.00
ACM Connectioms
Details
       

 04-10-2016
5.00
Varous Wiring Tasks
Details
       

 04-09-2016
2.50
EMS Install
Details
       

 04-04-2016
3.25
Wiring Tasks, Wing Move
Details
       

 04-03-2016
4.00
Various Wiring Tasks
Details

 04-02-2016
2.00
Mount Subpanel Componets
Details
       

 04-01-2016
0.50
Solder ELT Connector
Details
     

 03-30-2016
0.50
Rivet Subpanel, SV-NET Wire
Details
     

 03-28-2016
3.00
FWF Electrical
Details
       

 03-27-2016
4.00
FWF Electrical
Details
       

 03-26-2016
6.00
Wiring and Subpanel Cut
Details
       

 03-23-2016
1.00
Ran Altenator and Flow Wires
Details

 03-22-2016
1.00
Air Line Planning
Details

 03-21-2016
3.00
Front Baffles, Rudder Fairing, Engine Sensors
Details
       

 03-20-2016
3.00
Engine Probes, AP Mount, Door Gap
Details
       

 03-19-2016
4.00
Landing Lights
Details
       

 03-16-2016
1.50
Wing Tip Ribs
Details

 03-14-2016
3.00
Left Wing Tip
Details
       

 03-13-2016
3.00
Right Wing Tip
Details
       

 03-12-2016
8.00
Rivet Bottom Wing Skins
Details
       

 03-11-2016
0.75
Removed Bottom Skin Vinyl
Details

 03-07-2016
3.00
Wing Wiring
Details
       

 03-06-2016
4.00
Various Tasks
Details
       

 03-05-2016
4.00
Pitot Control Box and Wiring.
Details
       

 03-04-2016
2.00
Roll Servo
Details
     

 03-03-2016
1.50
Pitot Plumbing
Details
       

 03-02-2016
2.00
Pitot Mast and Dimple Left Wing
Details
     

 03-01-2016
1.50
Fabricated ADAHRS Tray
Details
       

 02-29-2016
1.50
Magneto Harness and Wire
Details
       

 02-22-2016
2.00
Alternator Install
Details
     

 02-21-2016
3.00
Sanded and Filled Epoxy and Wiring
Details
       

 02-20-2016
3.00
Epoxy Cabin Cover
Details
       

 02-18-2016
1.00
Sanded Cowling
Details

 02-17-2016
1.00
Added Micro to Cowling
Details
     

 02-14-2016
3.00
Install Cabin Cover
Details
       

 02-10-2016
2.00
Engine Mount Covers
Details
       

 02-09-2016
1.00
Install Over Head NACA Controller
Details
     

 02-08-2016
2.00
Cut and Drill Air Seal Fabric
Details
       

 02-07-2016
1.50
Sanded and Added to Door Hinge Covers
Details

 02-06-2016
2.00
Fiberglass Hinges
Details
     

 02-05-2016
1.50
Wing Conduit
Details
       

 01-25-2016
2.00
Oil System
Details
       

 01-24-2016
3.00
Fuel Lines, Enhaust
Details
       

 01-23-2016
1.50
Baffle Seal Patterns
Details
       

 01-18-2016
3.00
Baffling Clips and Tension Rods
Details
       

 01-17-2016
2.00
Painted Cowling
Details

 01-09-2016
3.00
Cowl - Baffling Gap
Details
     

 12-28-2015
4.00
Trimming Baffling
Details
       

 12-27-2015
4.00
Baffling Air Ramps
Details
       

 12-07-2015
2.00
Epoxy Air Ramps and Starter Solenoid Wire
Details
       

 11-28-2015
3.00
FAB Alternate Air and Air Seal
Details
       

 11-27-2015
1.50
FAB Transition Lay-Up
Details
       

 11-24-2015
0.50
Oil Door Lay-Up
Details

 11-23-2015
4.00
Filtered Air Box
Details
     

 11-22-2015
2.00
Oil Door
Details
       

 11-17-2015
3.50
Baffling
Details
       

 11-16-2015
2.00
Baffling
Details
       

 11-15-2015
1.50
Baffling
Details
       

 11-14-2015
3.00
Bottom of Lower Cowl
Details
       

 11-08-2015
3.00
Side Hinges
Details
       

 11-02-2015
2.00
Cowling
Details
       

 10-31-2015
5.00
Fit Bottom Cowl and Cowl Split Line
Details
       

 10-26-2015
3.00
Bottom Cowl Slot, Inlet Ramps
Details
       

 10-25-2015
3.00
Mount Propeller, Tope Cowling
Details
       

 10-24-2015
2.00
Cowling Halves
Details
     

 10-22-2015
2.00
Match Drill Spinner
Details
       

 10-20-2015
2.00
Mount Engine
Details
       

 10-19-2015
1.50
Engine Arrival
Details
       

 10-18-2015
2.00
Firewall Bulkhead Components
Details
       

 10-17-2015
2.00
Rear NACA Vents
Details
       

 10-12-2015
1.50
Finish Nose Gear Fairing
Details
     

 10-11-2015
3.00
Re-Do Nose Faring
Details
     

 10-10-2015
1.50
Cut Spinner
Details
     

 10-07-2015
1.00
Riveted Spinner Backplate
Details
     

 10-05-2015
2.00
Spinner Backplate
Details
       

 10-04-2015
1.00
Riveted Nose Gear Nutplates
Details

 10-03-2015
3.00
Nose Gear Leg Fairing
Details
       

 10-03-2015
1.50
Fit Spinner
Details
     

 10-02-2015
1.00
Final Coat Cabin Top
Details
     

 09-30-2015
1.00
Painted Cabin Top
Details
     

 09-28-2015
3.00
Fit Nose Gear Fairing
Details
       

 09-27-2015
3.00
Lower Intersection Fairings
Details
       

 09-26-2015
3.50
Gear Fairings
Details
       

 09-25-2015
3.00
Epoxy Pads Right Faring, Fit Nose Fairing
Details
     

 09-22-2015
3.00
Fit Right Main Gear Fairing
Details
       

 09-21-2015
3.00
Fit and Adjust Left Main Gear Fairing
Details
     

 09-20-2015
3.00
Main Fairings
Details

 09-14-2015
1.00
Sand and Fill Cabin Top
Details
     

 09-13-2015
1.00
Sand and Fill Cabin Top Again
Details
     

 09-06-2015
1.50
Install Brakes
Details
       

 09-05-2015
3.00
Install Nose Gear
Details
       

 09-03-2015
2.00
Mount Main Gear
Details
       

 09-02-2015
1.50
Assemble Main Wheels and Tires
Details
     

 08-31-2015
3.50
Prime Cabin Top and Rear Vent Adapters
Details
       

 08-30-2015
4.00
Overhead Console Install, Rivet Oil Cooler
Details
       

 08-29-2015
4.00
Mount Gear Legs
Details
       

 08-26-2015
1.00
Install Fuel Filter, Pump, and Transducer
Details
       

 08-23-2015
1.50
Sanded Micro and Paint Hinges
Details
       

 08-22-2015
1.75
Sand and Filler on Doors
Details

 08-18-2015
1.00
Sand Filler and Add Filler to Right Cabin Top
Details

 08-17-2015
1.00
FIller to Left Cabin Top
Details
       

 08-15-2015
1.00
Reflective Heat Shield
Details
       

 08-14-2015
2.50
Rivet Cowl Hinges. Match Drill Engine Mount
Details
       

 08-09-2015
2.00
Oil Cooler Mount, Heater Boxes
Details
       

 08-08-2015
3.00
Cowl Attatch Hinges
Details
       

 08-05-2015
2.00
Overhead Console Access Panels
Details
       

 08-04-2015
1.50
Fit Overhead Console
Details
       

 08-03-2015
1.00
Build Door Seal Edges
Details
     

 08-02-2015
2.50
Door Windows and Door Gap Fill
Details
       

 08-01-2015
6.00
Left Door Latch Assembly, Fit, and Strut
Details
       

 07-29-2015
1.00
Right Gas Strut Doubler
Details
     

 07-28-2015
2.00
Cabin Pins Block
Details
       

 07-27-2015
4.00
Righr Door Latch Assembly
Details
       

 07-26-2015
3.00
Door Latch
Details
       

 07-25-2015
2.00
Right Door Seal Gap
Details

 07-25-2015
1.00
Added to Top of Left Door
Details

 07-24-2015
0.75
Nosewheel Assembly
Details
     

 07-23-2015
2.00
Left Door Seal
Details
       

 07-22-2015
1.00
Drilled Left Door Hinge
Details

 07-21-2015
1.00
Pilot Door Re-Do
Details

 07-20-2015
6.00
Trim Doors and Door Hinges
Details
       

 07-19-2015
6.00
Inital Trim of Doors
Details
       

 07-18-2015
2.50
Glue Door Halves
Details
       

 07-12-2015
2.50
Drill Door Shell and Gas Strut Doubler
Details
       

 07-11-2015
2.50
Prepare Door Shells
Details
       

 07-06-2015
2.00
Finishing Kit Arrival and Inventory
Details

 06-28-2015
2.00
Fuel Lines
Details
       

 06-27-2015
3.00
Alieron Trim Install
Details
     

 06-20-2015
2.00
Cabin Top Filler
Details
       

 06-15-2015
3.00
Cabin Top
Details
       

 06-14-2015
3.50
Windscreen and Rear Windows
Details
       

 06-13-2015
4.00
Drilling Cabin Cover
Details
       

 06-07-2015
1.50
Fit Cabin Cover and Tail Skin
Details

 06-06-2015
1.50
Striker Plate and Rudder Cable Guides
Details
       

 06-05-2015
2.00
Re-fit Cabin Top
Details

 06-04-2015
2.00
Add Glass to Cabin Top
Details

 05-19-2015
2.00
Elevator Control Rods
Details
       

 05-18-2015
2.50
Rudder Cables
Details
       

 05-17-2015
3.00
Cabin Cover Fit and Fail
Details
       

 05-16-2015
1.50
Rudder Pedal Install
Details
       

 05-12-2015
1.00
Brake Reservoir and Rudder Cables
Details
       

 05-11-2015
1.00
Small Fuselage Tasks
Details
       

 05-10-2015
2.00
Continue Fitting Cabin Cover
Details

 05-09-2015
2.00
Sanding and Cutting Cabin Cover
Details

 05-02-2015
3.00
Intial Cabin Cover Fit
Details
       

 04-25-2015
2.50
Baggage Door Install
Details
       

 04-19-2015
3.00
Rivet Baggage Door
Details
       

 04-18-2015
2.50
Install Control Sticks/Base
Details
       

 04-13-2015
2.00
Control Sticks and Bases
Details
       

 04-12-2015
1.50
Elevator Idler Arm
Details
       

 04-11-2015
4.00
Rear Seat Backs
Details
       

 04-06-2015
1.50
Cut and Match Drill Rudder Bearing Blocks
Details
     

 04-05-2015
2.00
Flap System Install
Details
       

 04-05-2015
2.50
Flap System
Details
       

 04-04-2015
3.00
Brake Pedals and Brake Cylinder
Details
       

 03-30-2015
2.00
Fuel Valve Install
Details
     

 03-29-2015
1.00
Final Drill and Paint Access Covers
Details
     

 03-28-2015
3.00
Control Rod Fabrication
Details
     

 03-25-2015
1.00
Interior Paint
Details
       

 03-22-2015
4.50
Brake Lines
Details
       

 03-21-2015
1.50
Parking Brake
Details
     

 03-18-2015
1.50
Tunnel Covers
Details
     

 03-14-2015
2.50
Baggage Door
Details
       

 03-13-2015
2.00
Shoulder Harness Wear Blocks
Details
       

 03-08-2015
2.50
Baggage Cover and Corrugations
Details
       

 03-07-2015
4.00
Rivet Baggage Floors
Details
       

 03-06-2015
1.50
Rivet Fowards Cabin Floors
Details
       

 03-04-2015
2.00
Rivets Floor Plans
Details
       

 03-01-2015
2.00
Conduit in Baggage Area
Details
       

 02-28-2015
4.00
Baggage Floor and Antenna Access Panels
Details
       

 02-22-2015
2.50
Comm Antenna Doublers
Details
       

 02-21-2015
2.50
Baggage Door Channel Seals and Panel
Details
       

 02-20-2015
2.00
Baggage Area
Details
       

 02-15-2015
3.00
Rivet Tailcone to Fuselage
Details
       

 02-14-2015
1.50
Rivet Tailcone Attach
Details
       

 02-08-2015
3.00
Cleco, Match Drill, CS, and Debur and Dimple Tailc
Details
       

 02-07-2015
1.00
Drill and Dimple F-1006 Bulkhead
Details
     

 02-06-2015
1.00
Install Steps
Details

 02-02-2015
4.00
Torque Tube, Bellcrank Pushrod, Aileron Install
Details
       

 02-01-2015
2.00
Trim Mount
Details
       

 01-31-2015
2.00
Trim Cable and Trim Bellcrank Brackets
Details
     

 01-30-2015
1.50
Elevator Pushrod
Details
     

 01-24-2015
3.00
Aileron Torque Tube Fabrication
Details
     

 01-19-2015
1.50
Aileron Acutation - Bellcrank Install
Details
     

 01-18-2015
2.50
Aileron Acutation - Aileron Pushrods
Details
     

 01-17-2015
2.00
Aileron Acutation - Bellcrank Pushrods
Details
       

 01-11-2015
4.50
Bottom Wing Skins - Right
Details
       

 01-10-2015
3.50
Bottom Wing Skins - Left
Details
       

 01-03-2015
2.00
Mount Fuel Tanks, Repair Tank Leak
Details

 12-27-2014
1.00
Stall Warning Wires
Details

 12-26-2014
1.50
Test Fuel Tanks
Details

 12-21-2014
4.00
Removing QB Panels
Details
       

 12-20-2014
4.00
Rivet Rudder TE, Roll Leading Edge, CB Weight
Details
       

 12-14-2014
3.00
Tank Sealant on Trailing Edge
Details
       

 12-13-2014
1.00
Stall Warning System
Details
     

 12-07-2014
3.00
Stall Warning System
Details
       

 12-06-2014
4.00
Rivet Vertical Stabilizer
Details
       

 11-30-2014
4.00
Rivet Gap Fairings, Top Skin Inboard Nutplates
Details
       

 11-29-2014
3.00
Gap Fairing
Details
       

 11-28-2014
2.00
Rivet Rudder Assembly
Details

 11-27-2014
1.00
Prime Rudder Parts
Details
     

 11-26-2014
2.00
Dimple and Countersink Rudder Parts
Details

 11-25-2014
2.00
Debur Parts
Details

 11-23-2014
4.00
Rudder Assembly
Details
       

 11-21-2014
2.00
Prime VS Parts
Details
       

 11-20-2014
3.00
Debur, Dimple and Countersink
Details

 11-17-2014
4.00
Vertical Stabilizer
Details
       

 11-16-2014
2.00
Fuel Senders
Details

 11-14-2014
2.00
QB Wing and Fuselage Inventory
Details

 11-12-2014
2.00
Quick Build Kit Arrival
Details
       

 11-09-2014
3.00
Fabrication of Wing and Fuselage Carts
Details
       

 11-01-2014
1.50
EAA Tech Visit
Details

 10-19-2014
2.50
Rivet Top Skin & Attatch Bellcrank Mount
Details
       

 10-18-2014
2.00
Rivet and Install Harware on Aft Deck
Details
       

 10-15-2014
2.00
Rivet Side and Bottom Skins
Details
       

 10-12-2014
3.00
Rivet Side and Bottom Skins
Details
     

 10-11-2014
3.00
Rivet Bellcrank and Bulkheads
Details
       

 10-10-2014
1.50
Prime Tailcone Parts
Details
       

 10-06-2014
1.50
Bellcrank Assembly
Details
     

 10-05-2014
3.00
Dimpling and Countersinking Tailcone Parts
Details
     

 10-04-2014
4.00
Debur Tailcone Parts
Details

 10-01-2014
2.00
Shoulder Harness, Cover Plates, Disassemble
Details
       

 09-29-2014
2.00
Fabricate F-1011D, F-1012D, and Drill Aft Deck
Details
       

 09-28-2014
4.00
Match Drill Assemble Skin and Top Skins
Details
       

 09-27-2014
3.00
Aft Deck
Details
       

 09-26-2014
1.50
Bellcrank Rib Angles
Details
       

 09-25-2014
1.00
Match Drill Longerons and Bulkhead Channel
Details
       

 09-22-2014
2.00
Rudder Stiffners and Rudder Stop Brace
Details
     

 09-21-2014
2.00
Assemble and Match Drill Left and Aft Bottom Skin
Details
       

 09-20-2014
4.00
Assemble and Match Drill Bottom and Right Skin
Details
       

 09-18-2014
1.50
Fabricate F-1032 Longerons
Details
       

 09-15-2014
2.00
Cut and Mark Fuselage Stiffners
Details
       

 09-14-2014
2.00
Assemble and Match Drill F-1008, F-1007, F-1006
Details
     

 09-13-2014
2.00
Fabricate and Assemble F-1010 Bulkhead
Details
       

 09-08-2014
2.00
Assemble and Match Drill F-1011 Bulkhead
Details
       

 09-07-2014
3.50
Fabricate Tie Down, Rudder Cable Anchor and Stiffn
Details
       

 09-06-2014
4.00
Attach Trim Tab to Elevator with Hinge
Details
       

 09-01-2014
2.00
Trim and Attach Counter Weights
Details
       

 08-31-2014
2.50
Roll Leading Edge
Details
       

 08-30-2014
2.00
Rivet Trailing Edge
Details
       

 08-25-2014
2.00
Tank Sealant on TE and Trim Tabs
Details
       

 08-24-2014
2.50
Debur, Dimple, and Rivets Trim Tabs to Bottom Flan
Details
       

 08-23-2014
3.00
Trim Tab Assembly
Details
       

 08-22-2014
1.50
Cut Out TE and Trim Tab Foam Ribs
Details
       

 08-18-2014
2.00
Rivets Skins to Root Rib and Rib Tips
Details
       

 08-17-2014
1.50
Rivet Skins to Front Spars, Rivet Trim Bracket
Details
       

 08-16-2014
2.50
Rivets Skins to Rear Spars and Ribs Halves
Details
       

 08-11-2014
2.00
Back Rivet Rib Halves to Skins
Details
       

 08-10-2014
1.00
Rivet Nutplates to Reinforcemnt Plates
Details
     

 08-09-2014
2.00
Rivet Rib Tips, RP/NP to Spar, Root Ribs and Horns
Details
       

 08-03-2014
1.50
Prime Elevator Parts
Details
       

 08-02-2014
5.00
Debur, Dimple, and Countersink Parts
Details
       

 07-28-2014
2.00
Match Drill Close-Out Tabs, Elevators Horns, Trim
Details
       

 07-27-2014
3.00
Trim Access Plates, Gussets, Rip Tip, and Trailing
Details
       

 07-26-2014
2.00
Cleco and Match Drill Elevators
Details
       

 07-20-2014
2.00
Rib Tip Assembly, Shear Clips, Bend Close-Out Tabs
Details
       

 07-19-2014
2.00
Separate, Debur, Cleco, and Match Drill Ribs
Details
     

 07-12-2014
4.00
Rivets Skins to Ribs, Spars, and Stringers
Details
       

 07-07-2014
1.00
Rivet Nose Ribs
Details
     

 07-06-2014
1.00
Rivet Inspar Ribs
Details
       

 07-05-2014
1.00
Rivets Stringers and Stringer Web
Details
     

 06-29-2014
2.00
Prime HS Parts
Details
       

 06-28-2014
2.00
Debur, Dimple, and Countersink HS Parts
Details
       

 06-22-2014
3.00
Cleco and Drill Stingers, Web, Skin and Rear Spar
Details
       

 06-21-2014
3.00
Cleco and Drill Nose and Inspar Ribs to Front Spar
Details
       

 06-15-2014
1.00
Fabricate HS Cradles
Details
     

 06-14-2014
2.00
Trim, Debur, and Bend Inspar and Nose Ribs
     

 06-07-2014
5.00
Front Spar Assembly
Details
       

 06-01-2014
1.50
Cut and Debur Spar Caps and Stringers
Details
       

 05-31-2014
1.50
Fabricate Front Spar Attachment Brackets
Details
     

 05-26-2014
1.00
Hinge Bracket Assembly
Details
       

 05-25-2014
4.00
Rear Spar Assembly
Details
       

 05-22-2014
1.00
EAA Technical Visit
Details

 05-19-2014
2.00
CB Weight and Final Skin Rviets
Details
       

 05-18-2014
1.50
Roll Leading Edge
Details
       

 05-17-2014
1.50
Rivet Trailing Edge
Details
       

 05-16-2014
2.00
Rivet Main Spar, Top Rib, and CB Rib
Details
       

 05-12-2014
1.50
Sealant and Cleco TE, Rivets Stiffners and Ribs
Details
     

 05-11-2014
2.00
Rivet Top & Bottom Halves and Shear Clips
Details
       

 05-10-2014
2.00
Back Rivet Stiffners to Skins
Details
       

 05-09-2014
1.50
Rivet Rudder Horn, Bottom Rib, NP to Spar
Details
       

 05-05-2014
3.50
Deburr/Dimple Flanges, Dimple Skins, CS TE, Prime
Details
       

 05-04-2014
1.00
Remove Skins, Deburr and Bend TE
Details
     

 05-03-2014
2.00
Cleco and Final Drill Rudder Skins and TE
Details
       

 05-02-2014
1.00
Cleco and Drill Top Rib and CB Rib
Details
     

 05-01-2014
2.00
Assemble Rudder Spar and Skeleton
Details
     

 04-30-2014
1.50
CS Rudder Horn and Attach to Bottom Rib and Spar
Details
       

 04-29-2014
0.50
Cleco and Drill Bottom Rib Halves
Details
     

 04-28-2014
2.00
Cut and Deburr R1003, R1004, R1010, R1015
Details
       

 04-27-2014
3.50
Rivet VS Skin
Details
       

 04-26-2014
2.00
Rivet Rudder Stops, Rear Spar, and VS Skeleton
Details
       

 04-25-2014
1.00
Prime VS Parts
Details
     

 04-24-2014
1.00
Front Spar Doubler and Rubber Stops
Details
       

 04-23-2014
2.00
Deburr and Dimple Ribs Flanges
Details
     

 04-22-2014
2.50
Final Drill, Deburr, and Dimple Skin
Details
       

 04-21-2014
1.00
Cleco VS Skin
Details
       

 04-20-2014
1.00
Assemble VS Skeleton and Final Drill
Details
       

 04-19-2014
2.50
Cut, Assemble, Cleco, and Drill Rear Spar Assembly
Details
       










Copyright © 2001-2024 Matronics. All Rights Reserved.