Powered By Kitlog Pro v2.0
Cleve's Web Site
RV9A
Wings
Work Logs Found:
68
Category Work Time:
268 Hours
Date
Hours
Work Log Summary
Details
04-06-2007
35.00
Riveted rib & installed Rt. wing tip strobe
Details
12-11-2006
4.00
Wings back on/Bolts in spar/Fuel-vent lines in
Details
12-07-2006
3.00
Lt wing tip riveted-nut plated
Details
12-06-2006
4.00
Finished rt. wing tip-Fit & drilled lt. wing tip
Details
12-05-2006
4.00
Continued work on right wing tip
Details
12-04-2006
3.50
Worked on right wing tip
Details
11-30-2006
4.00
Nuts to nut plates-Fitting Rt wing tip
Details
11-29-2006
3.50
More nut plates-Stick boot rings fabricated
Details
11-28-2006
3.50
More nut plates right wing
Details
11-27-2006
4.00
Installed plate nuts left wing root
Details
11-25-2006
3.00
Installed dimpled nut plates-wing root
Details
11-24-2006
3.50
Took off wings/Drilled & riveted nut plates
Details
11-14-2006
4.00
Inventoried finish kit-wing gap fairing-instrument
Details
11-08-2006
0.50
2. Rigged travel of the RT flap and matched it to
Details
11-02-2006
4.00
Drilled both rear spars to final size-drilled bott
Details
11-01-2006
1.50
Planned drilling rear spar to size
Details
10-31-2006
3.50
Both rear spars step drilled without drift to 1/4"
Details
10-27-2006
3.50
Prepared to drill rear spar
Details
10-26-2006
4.50
Both wings put on for 1st. time!!!!!
Details
10-23-2006
4.50
Closed Rt. wing/Unloaded O-320/Leveled fuse
Details
10-20-2006
4.00
Riveted 1/3 right bottom skin-Access panels fixed
Details
10-19-2006
4.50
Pulled AOA tubing thru conduit/Preped wing skin
Details
10-18-2006
4.00
Final wiring of pitot/Installed AOA Rt. Wing
Details
10-17-2006
4.00
Finished closing LEFT wing/Mounted main gear legs
Details
10-16-2006
4.00
Closing left wing continues
Details
10-13-2006
4.00
Pitot wiring installed-Began riveting left wing sk
Details
10-12-2006
4.00
Wiring of pitot controller/Primed left bottom wing
Details
10-11-2006
4.00
Roll servo finished/Pitot tube, nut plates etc ins
Details
10-10-2006
4.00
Worked on pitot installation
Details
10-09-2006
4.00
Dimpled bottom skin & ribs/Fit pitot & backing pla
Details
10-08-2006
1.00
Safety wired roll servo & stripped paint on seat b
Details
10-07-2006
1.00
Safety wiring roll servo/Stripped paint off seat b
Details
10-06-2006
4.00
Installed Lt. bottom inboard wing skin/Worked on p
Details
08-29-2006
3.50
Tanks closed!!!!!
Details
08-28-2006
3.50
Retorqued pickup tube/Finished riveting 705 bulkhe
Details
08-25-2006
4.00
Sealed fuel end plate rivets & nutplates with Pros
Details
08-23-2006
3.00
Tried to figure out how the pitot tube woud mount
Details
08-22-2006
3.00
Drilled block Rt. Step/Prepared float for fuel gua
Details
08-21-2006
3.50
Anchored conduit right wing/Ran strobe wires in bo
Details
08-19-2006
3.00
Ran wires in wings/Anchored conduit left wing/Adde
Details
07-18-2006
5.00
Hung right flap and added 1st part to fuselage
Details
07-13-2006
3.50
Hung right aileron alot easier than the left
Details
07-12-2006
4.00
Left aileron and all push rods mounted and aileron
Details
07-11-2006
4.00
Finished cutting & riveting aileron push rods- Dri
Details
07-10-2006
1.00
Cut and riveted control stick/ aileron push rod
Details
07-07-2006
3.00
Finished landing light/Assembled & installed both
Details
07-06-2006
3.50
Drilled the landing light lens, added many nut pla
Details
07-05-2006
3.50
Cut landing light lens - Fitting reflector
Details
07-03-2006
3.50
Cutout for landing light/Shaping reflector/Attachi
Details
07-01-2006
2.00
Practiced cutting with rotary tool/Another coat of
Details
06-30-2006
5.00
Aileron Bell Crank/Aileron Push Rods/All Gap Fairi
Details
06-28-2006
4.00
Riveted flap gaps/Primed push rods/Started on Bell
Details
06-26-2006
4.00
Readied right flap gap seal- Riveted rt. aileron g
Details
06-24-2006
2.00
Right aileron gap fairing drilled, deburred, dimpl
Details
06-23-2006
2.50
Dimpled & Primed Flap Fairing & Riveted Aileron Fa
Details
06-22-2006
4.00
Aileron hinges riveted! Aileron gap fairing ready
Details
06-21-2006
2.00
Problem with riveting on aileron hinges
Details
06-20-2006
3.00
Assembled right inboard aileron hinge
Details
06-19-2006
3.00
Left inboard aileron hinge Plans table
Details
06-17-2006
2.00
Drove #4 rivets today; best yet
Details
06-16-2006
1.50
Drilling rivets in aileron hinge bracket
Details
06-12-2006
3.00
Riveted aileron hinge brackets
Details
06-10-2006
5.00
Completed outboard aileron hinge bracket/ dimple t
Details
06-09-2006
4.00
Worked on Aileron hinge bracket
Details
06-07-2006
2.00
Tried to rivet the aileron hinge brackets
Details
06-06-2006
4.50
Aileron hinge brackets
Details
04-13-2006
6.00
Day 2 building wing stand Looks good
Details
04-12-2006
7.00
Built wing stand from plans on net
Details
SITE NAVIGATION
Contact Builder
RV9A Home
Category
# Logs
# Hours
All
430
1567
Avionics
15
54
Canopy-Finish kit
54
174
Correction of squawk
2
6
EAA Inspection
7
12
Empennage
25
150
Engine Run
1
4
Firewall Forward-Eng
87
283
Fuselage
142
483
Miscellaneous
18
100
Shop Supplies
7
26
Tools
4
7
Wings
68
268
Copyright © 2001-2024 Matronics. All Rights Reserved.
