KitLog pro

Powered By Kitlog Pro v2.0

Waynes RV8 Project
Work Logs Found: 64
Category Work Time: 48 Hours
 Date
Hours
Work Log Summary

Details

 09-20-2010
0.40
Riveted end of elevator had not been riveted.
Details

 09-20-2010
0.30
Finished filing fiberglass tip.

 09-19-2010
0.20
Continued to file fiberglass tip

 04-01-2010
1.30
Fiberglass tips
Details

 03-17-2010
0.50
Shaped lead weight cont.
Details

 03-16-2010
1.60
Repeated procedure from right elevator

 03-02-2010
1.80
Rolled and riveted leading edge

 03-01-2010
2.20
Rolled and riveted the leading edges

 02-22-2010
0.20
Trimmed inboard edge of E-721. Clecoed to elev.

 02-22-2010
2.10
Made final adjustments to trim tab.
Details

 02-18-2010
0.30
Match drilled and clecoed forward portion of E-721

 02-18-2010
0.10
Marked the inboard edge of E-701-L on E-721

 02-18-2010
0.20
Hinge
Details

 02-18-2010
0.30
Adjusted hinge line of trim tab and elevator

 02-17-2010
2.75
Riveted E-701-L and E-713 to the understructure

 02-17-2010
0.50
Riveted E-606PP to E-701-L along bottom flange
Details

 02-17-2010
0.25
Finished attaching E-714

 02-16-2010
0.10
Placed skin over skeleton

 02-10-2010
2.00
Prepped trim parts including etching and primining

 01-29-2010
0.70
Riveted bottom part of trim tab
Details

 01-29-2010
0.20
Clecoed trim tab back together

 01-27-2010
1.75
Prepped trim tab parts including priming

 01-25-2010
0.10
Trimmed E-721 trim tab hinge

 01-25-2010
0.30
Trimmed E-717 and E-718

 01-25-2010
0.10
Disassembled trim tab

 01-25-2010
0.20
Dimpled top of the E-607PP trim tab spar

 01-25-2010
0.80
Continued work of trim tab.
Details

 01-24-2010
1.20
Continued work on trim tab.
Details

 01-24-2010
1.00
Completed trailing edge bend of the trim tab

 01-21-2010
2.00
Worked on trim tab.
Details

 01-21-2010
0.30
Bent left elevator tabs.
Details

 01-21-2010
0.25
Bent elevator trim tab openings.

 01-16-2010
0.30
Riveted E-713 to E-701. Placed E-714 inside E-713.

 01-14-2010
0.80
Riveted skeleton parts.
Details

 01-13-2010
0.30
Riveted E-705 to E-702.

 01-13-2010
0.75
Prepped and riveted parts.
Details

 01-12-2010
0.40
Primed parts at Mark's house.

 01-06-2010
3.50
Acid etch, alodine skeleton parts.

 01-05-2010
1.00
Skeleton parts prep.
Details

 01-05-2010
0.15
Drilled E-701-L to the understructure. Disassemble

 01-05-2010
0.10
Countersunk (Dimpled) for rivets
Details

 12-30-2009
0.50
Riveted platenuts to trim access panel

 12-30-2009
1.25
Primed inside of (L) elevator skin
Details

 12-29-2009
0.60
Trim access panel plate nut preps.
Details

 12-21-2009
1.30
Smoothed edges of (L) elev. skin.

 12-14-2009
0.20
Disassembled elevator

 12-14-2009
1.00
Dimpled and smoothed stiffeners

 12-14-2009
1.10
Devinyled top of skin

 12-14-2009
0.75
Deburred inside of skin

 12-14-2009
0.30
Clecoed and final drilled E-606PP to E-705

 12-14-2009
0.25
Clecoed and drilled WD-605-1 to E-702 & E-705

 12-11-2009
0.70
Drilled stiffeners to skin

 12-08-2009
1.50
Fabricated D, E & F stiffeners

 12-08-2009
0.50
Continued to fabricate stiffeners

 12-07-2009
1.00
Fabricated stiffeners

 12-07-2009
0.40
Clecoed E-701-L to the understructure

 11-30-2009
0.25
Smoothed edges and clecoed E-615PP to skin

 11-30-2009
0.70
Fabricated "H" stiffeners

 11-08-2009
0.40
Elevator skeleton prep.
Details

 11-07-2009
0.20
Drilled holes in E-714 for screws

 11-06-2009
0.25
Fitted E-714 counterweight
Details

 11-02-2009
1.00
Prepared tip ribs
Details

 11-02-2009
0.20
Match drilled reinforcement plates to spar
Details

 11-01-2009
0.30
Clecoed reinforcing plates to spar
Details










Copyright © 2001-2024 Matronics. All Rights Reserved.