KitLog pro

Powered By Kitlog Pro v2.0

PETER'S WEB SITE
Work Logs Found: 316
Category Work Time: 830 Hours
 Date
Hours
Work Log Summary

Details

 01-03-2011
1.00
Fabricated the aileron control stops
Details
       

 01-02-2011
3.50
Right wing stuff
Details
       

 01-01-2011
4.00
Left wing
Details

 12-08-2010
2.00
Riveted top outer skin - left wing
Details

 12-02-2010
2.00
Riveted flap hinge to flap
       

 12-01-2010
6.00
Attaching aileron and flap to right wing
Details
       

 11-30-2010
2.00
Riveted aileron gap fairing
Details
       

 11-29-2010
2.00
Riveted right aileron hinges to spar
Details
       

 11-28-2010
0.25
Move right wing to cradle
Details
       

 11-27-2010
5.00
Build wing cradle
Details
       

 11-22-2010
2.00
Riveted top skin of right wing
Details
       

 11-20-2010
4.00
Left wing leading edge work
       

 11-17-2010
1.50
Left wing leading edge assembly
Details

 11-16-2010
2.00
Completed riveting top skin right wing
Details
       

 11-14-2010
2.00
Riveting outboard skin
       

 11-13-2010
1.00
Riveted lower inboard top skin to rear spar
       

 11-09-2010
4.00
Fabricated the aileron to control stick pushrods
Details
       

 11-07-2010
3.00
Started to rivet top skin to right wing
Details
       

 11-06-2010
6.00
Riveted right wing leading edge to spar
Details
       

 10-01-2010
4.00
Bending the fuselage main longerons and drilling a
Details
       

 09-26-2010
1.00
Tail cone cut-out for tail wheel spring
       

 09-25-2010
2.00
Working on tailcone assembly
       

 09-21-2010
0.00
More bulkhead pictures
       

 09-20-2010
4.00
Primed and stated to rivet bulkhead parts
       

 09-18-2010
7.00
Alumipreped and started priming bulkheads
       

 09-12-2010
2.00
Contunued to prep parts for priming

 09-07-2010
1.00
More preping of parts for alumiprep and priming

 09-06-2010
3.00
Started F710 bulkhead
Details

 08-23-2010
4.00
F710 and F711 bulkheads completed
       

 08-20-2010
2.00
Continued smoothing F707 F708 bulkheads

 08-19-2010
2.00
Started F707 and F708 bulkheads
Details

 08-18-2010
3.00
Started F706 bulkhead
Details
       

 08-17-2010
4.00
Completed all parts of F705 bulkhead
       

 08-16-2010
4.00
More work on F705 Rear spar bulkhead assembly
Details
       

 08-15-2010
3.50
More work on F705 rear spar bulkhead
Details
       

 08-13-2010
5.00
Started the F705 rear spar bulkhead
Details
       

 08-08-2010
2.00
Assembled control column mount
       

 08-07-2010
5.00
More work on center section bulkhead
Details
       

 08-06-2010
1.00
Drilled bolt holes in Centre section bulkhead to s
       

 08-05-2010
4.50
Work on forward and aft centersection bulkhead
       

 08-04-2010
3.00
Center section
Details
       

 07-26-2010
0.00
OSH Planes
       

 07-26-2010
0.00
OSH Planes
       

 07-19-2010
1.00
Started center section bulkhead
       

 07-18-2010
3.00
Riveted firewall
Details
       

 07-17-2010
5.00
Alumiprep and prime firewall parts
       

 07-16-2010
2.00
Setting up to leak test RW fuel tank
Details

 07-16-2010
3.50
More work on firewall
Details
       

 07-13-2010
4.50
Fabricated firewall brackets and angle
       

 07-12-2010
2.00
Started to clecoe F-601 firewall parts
       

 07-11-2010
5.50
Riveted RW tank baffle
Details
       

 07-06-2010
2.50
Prep tank and baffle and bent fuel sender rod
Details
       

 06-18-2010
2.50
Riveted last rib of right wing tank
       

 06-16-2010
2.50
Sealed RW fuel tank inboard rib
Details
       

 06-15-2010
1.00
Fabricated RW vent line
       

 06-14-2010
2.00
Last internal rib sealed
Details

 06-01-2010
2.25
Anothe rib sealed in right tank
Details

 05-31-2010
1.00
Right tank fuel pick up tube
Details
       

 05-29-2010
4.50
Completed third rib in right fuel tank and more
Details
       

 05-28-2010
3.00
Completed second rib in right tank

 05-10-2010
2.00
Sealed and riveted first rib in right tank

 05-08-2010
0.00
Fuselage large part storage
Details
       

 04-27-2010
0.00
Inventory completed
Details

 04-16-2010
0.00

Details
       

 04-14-2010
0.00
Picked up Fuselage kit at ABF depot
Details
       

 04-04-2010
3.00
Out board rib Right tank
Details

 04-03-2010
3.00
Riveted and sealed fuel tank flange and drain
Details
       

 04-02-2010
2.50
Riveted right tank stiffner
Details
       

 03-31-2010
1.00
Dimpled the right fuel tank skin

 03-30-2010
1.00
Right fuel tank skin
Details

 03-29-2010
1.00
Deburr right fule tank skin

 03-28-2010
3.25
Prepared right tank for sealing
Details

 03-26-2010
2.50
Riveted last rib of left tank
Details
       

 03-24-2010
4.00
Riveted inboard root rib
Details
       

 03-23-2010
1.00
Bent fuel sender
Details
       

 03-22-2010
1.50
Riveted fuel pick up tube assembly
Details
       

 03-16-2010
1.00
Primed main spar flange
Details
       

 03-14-2010
2.00
Formed vent line and fittings
Details
       

 03-13-2010
4.00
Prosealed L2 rib
Details
       

 03-11-2010
2.50
Prosealed L3 rib

 03-08-2010
2.50
Prosealed another rib ( L4)
Details

 03-06-2010
3.00
Prp sealed another rib
Details

 02-28-2010
2.00
C'sink spar flange holes and drill out tie down ho
Details

 02-27-2010
4.00
Dimple skins and match drill seals and brace
Details
       

 02-26-2010
2.50
Dimpled wing skins
Details

 02-24-2010
3.50
Access panel and bottom skin work
Details
       

 02-21-2010
6.00
Continued priming parts

 02-20-2010
4.00
Primed wing skins, gap seal and flap brace
Details
       

 02-03-2010
2.00
Cut hole in wing skin for pitot mast
Details
       

 02-02-2010
2.00
More deburring and smoothing
     

 02-01-2010
2.50
Deburring wing skins
Details
     

 01-31-2010
5.00
2nd proseal session
Details
       

 01-30-2010
5.00
Prosealed drain, and fuel flange
Details
       

 01-30-2010
0.00
More pictures of tank
       

 01-22-2010
0.00
Ordered the fuselage!!!
Details

 01-17-2010
5.00
Started sealing
Details
       

 01-13-2010
1.50
Completed scuffing and dimpling the left fuel tank
Details
     

 01-09-2010
4.50
Prep left fuel tank for sealing
Details
       

 12-25-2009
0.00
Fuselage as a gift !!!!
Details

 12-15-2009
1.00
Made clip for fuel vent linre - left fuel tank
Details
       

 12-14-2009
5.50
Started final prep work on left fuel tank before p
Details
       

 12-13-2009
5.50
Riveted right flap -both flaps completed
Details
       

 12-12-2009
2.00
Started to assemble right flaps
       

 12-05-2009
3.50
Alumipreped and primed flap parts
Details
       

 11-29-2009
6.00
Worked on right flap
Details
       

 11-28-2009
6.00
Started on right flap
Details
       

 11-27-2009
2.00
Riveted left flap
Details

 11-26-2009
7.00
Dimpled, assembled and started riveting left flap
Details
       

 11-25-2009
3.00
Clean and prime left flap parts
Details
       

 11-24-2009
4.00
Fabricated and drilled FL706A,B flap actuting part
Details
       

 11-23-2009
4.00
Start to fabricate left flap
Details
     

 11-22-2009
5.00
Riveted right aileron
Details

 11-21-2009
2.00
Assemble and start riveting right aileron
Details
       

 11-20-2009
7.00
Assembled and rvited left aileron
Details
       

 11-15-2009
3.00
Prime aileron components
Details
       

 11-15-2009
3.00
Preped and Prime L&R aileron parts

 11-14-2009
7.00
Continued on LW aileron.
Details
       

 11-13-2009
2.25
Worked on right aileron
Details
       

 11-12-2009
1.50
Bent left aileron skin
Details
       

 11-08-2009
3.50
Smooth and match drill nos and main ribs
Details
       

 11-08-2009
0.00
Horse Park
Details
       

 11-07-2009
3.00
Rivet aileron stiffners and spar reinforcement pla
Details
       

 11-06-2009
4.00
Prime aileron parts
Details
       

 11-03-2009
2.25
deburr spars and spar reinforcemnt plates

 11-02-2009
3.00
Match drilledspar reinforcement plates and hinge b
Details
       

 11-01-2009
1.25
Deburr stiffeners and skins
Details

 10-29-2009
2.00
Aileron skins and stiffners
Details
       

 10-26-2009
1.50
Left aileron stiffeners
Details

 10-24-2009
3.25
More wing work
Details
       

 10-23-2009
5.00
RW wing work
Details

 10-22-2009
3.25
Leading edge work
Details
       

 10-18-2009
5.75
Primed RW leading edge
Details
       

 10-17-2009
0.75
Fuel cap and flange
Details
       

 10-16-2009
2.00
Worked on leading edge joint plate
Details
       

 10-15-2009
4.00
Dimple LW and checked leading edge to tank fit
Details
       

 10-14-2009
2.00
Machine c'sink LW main spar
Details
       

 10-13-2009
2.80
Machine c'sink holes for tank skin
Details
       

 10-12-2009
2.00
Riveting leading edge
Details
       

 10-11-2009
5.00
Fitted new W423 joint plate and fitted tank skin
Details
       

 10-08-2009
1.50
Received inboard rib and joint plate
Details
     

 10-07-2009
1.25
Riveted left wing leading edge
Details
       

 10-06-2009
1.00
Riveted platenuts to W423 joint plate
Details

 10-05-2009
1.00
Dimpled LWLE ribs and skin
Details

 10-04-2009
2.50
Primed LWLE parts
       

 10-03-2009
2.00
Deburred leading edge skin
Details
       

 10-02-2009
3.00
Leading edge and fuel tank work
Details
       

 10-01-2009
1.50
Leading edge and fuel tank work
Details

 09-30-2009
3.75
Pulled tank skin over ribs and matched drilled LE
Details
       

 09-20-2009
4.25
Worked on top skin and wing walk doubler
Details
       

 09-19-2009
7.00
Riveted main ribs to rear spar
Details
       

 09-18-2009
1.75
Riveting ribs of right wing to front spar
Details
       

 09-13-2009
6.00
Primed 14 RW main ribs
Details

 09-06-2009
1.50
Installing and drilling W408L rib to leading edge
Details
       

 09-05-2009
3.00
Complete drilling LW skin to final size
Details

 09-04-2009
2.50
Cleco bottom skin to left wing and drilled skin to
       

 09-03-2009
3.00
Leveling LW on jig
Details

 09-01-2009
2.00
Mounted LW to wing jig
Details
       

 08-31-2009
3.00
Continued building wing jig

 08-30-2009
2.25
Completed riveting ribs to front and rear spar
Details
       

 08-29-2009
4.50
Riveted LW main ribs to front spar
Details
       

 08-28-2009
5.00
Alodined and primed LW main ribs
Details
       

 08-27-2009
2.50
Alumiprep LW main ribs

 08-25-2009
0.50
Deburred holes for conduit in main ribs

 08-24-2009
1.75
Clecoed RW leading edge ribs
Details
       

 08-23-2009
7.00
Leading edge cradle, clecoed eading edge to skin
Details
       

 08-22-2009
1.50
RW work
Details
       

 08-21-2009
1.00
Aileron hinge work
Details
     

 08-19-2009
3.00
Left wing work
Details
       

 08-17-2009
3.50
Match drilled ribs and prepared aileron hinge brac
Details
       

 08-15-2009
0.00
Steve and Sam are here to comment on my workmanshi
Details
       

 08-14-2009
4.50
Finish deburring and straightening right wing ribs
Details
       

 08-13-2009
1.50
More deburring

 08-12-2009
4.00
Continue to deburr right wing ribs
Details

 08-11-2009
2.00
Staighten 8 tank ribs right wing

 08-10-2009
1.00
Straighten right wing LE ribs

 08-09-2009
2.50
Deburr right wing ribs
Details
       

 08-07-2009
4.00
Finishing the left wing ribs
Details
     

 08-06-2009
1.50
Finish deburring left wing ribs, start to straight
Details
     

 08-05-2009
2.00
And more deburring

 07-16-2009
2.00
More deburring
Details

 07-10-2009
0.75
More deburring of left wing ribs
Details

 06-10-2009
3.00
Deburr and smooth edges of Left wing ribs
Details

 06-08-2009
0.80
Start of deburring left wing ribs
Details
       

 06-06-2009
4.50
Riveted doublers and reinforcement forks to rear s
       

 06-05-2009
3.00
Primed rear spar parts and assembled tie down
       

 05-29-2009
4.00
Drilled tie down and spacers
       

 05-28-2009
3.00
Match drilled and deburred rear spar and doublers.
       

 05-27-2009
1.00
Trimmed rear spar attach doublers
Details
       

 05-26-2009
2.00
Made tie down spacers
Details
       

 05-25-2009
3.50
Deburred rear spar and doublers
Details
       

 05-24-2009
1.00
Completed all nut plates on both front spars
Details

 05-17-2009
1.00
Corrected nut plates for access cover
Details

 05-07-2009
2.00
Riveted nutplates on 2nd front spar
Details

 04-30-2009
3.00
Riveted nutplates for tank skin attach
Details
       

 04-29-2009
3.50
Continue with front spar
Details
       

 04-28-2009
2.00
Front spar
Details
       

 04-19-2009
6.00
Inventory of wing
Details
       

 04-16-2009
0.00
The wings have arrived
Details
       

 03-30-2009
1.00
Fine tuning leading edge bend
Details
       

 03-29-2009
2.00
Curling leading edge of right elevator
Details
       

 03-22-2009
0.50
Sanded and fit left elevator fiberglass tip
Details

 03-21-2009
3.00
Bending leading edge
Details
       

 03-20-2009
3.00
Finish riveting Trim Tab
Details
       

 03-19-2009
3.20
Riveting Trim Tab
Details
       

 03-16-2009
1.00
Fix rudder leading edge
Details
       

 03-15-2009
2.50
Bending rudder leading edge
Details

 03-14-2009
0.00
Riveting rudder
     

 03-14-2009
2.50
Double flush riveting rudder
Details
       

 03-12-2009
0.00
Trim tab
Details
     

 03-12-2009
2.50
Bending tabs of Trim Tab
Details
       

 03-10-2009
2.50
Glueing the rudder trailing edge
Details
       

 03-10-2009
0.00
Glueing rudder trailing edge
Details
       

 03-07-2009
0.00
Riveting left elevator Part 3
Details
       

 03-07-2009
0.00
Riveting left elevator Part 2
Details
       

 03-07-2009
8.00
Riveting left elevator Part 1
Details
       

 03-06-2009
2.50
Bending elevator tab
Details
       

 03-06-2009
0.00
Bending elevator tab
Details
       

 03-01-2009
0.00
Winter Storm
Details
       

 02-28-2009
3.00
Prepped and primed LE parts
Details
       

 02-24-2009
2.50
Disassemble left elevator
Details
       

 02-22-2009
1.50
Started to rivet elevator skin
Details
       

 02-22-2009
0.00
More pictures
       

 02-22-2009
0.00
Elevator ready to disassemble
       

 02-22-2009
2.00
Bending left elevator trailing edge
Details
       

 02-22-2009
0.00
A look back at Right elevator bending
Details
     

 02-21-2009
1.50
Non Aviation style bucking bars !
Details
       

 02-21-2009
4.00
Continued elevator construction
Details
       

 02-21-2009
8.00
Assemble skeleton and prepare elevator for priming
Details
       

 02-18-2009
2.00
Smoothed edges of skin
Details

 02-17-2009
1.00
Started on left elevator
Details
       

 02-16-2009
0.00
More pictures right elevator
       

 02-16-2009
3.00
Finishing Right elevator
Details
       

 02-15-2009
3.00
Rivet RS elevator skeloton
Details
       

 02-15-2009
0.00
More pictures of RS elevator
Details
       

 02-14-2009
2.00
New tools, alumiprep and prime
Details
       

 02-13-2009
2.50
Drill deburr, and dimple skin and skeleton and wi
Details
       

 02-12-2009
2.00
Bend trailing edge
Details
       

 02-09-2009
1.50
Riveted stiffners to RS elevator
Details
       

 02-09-2009
0.10
Checked priming results
Details

 02-08-2009
2.00
Primed elevator skin and stiffners
Details

 02-08-2009
1.50
Alimiprep RS elevator skin and stiffners

 01-17-2009
2.00
Final rudder assembly continued
Details
       

 01-17-2009
7.00
Assemble and rivet rudder
Details
       

 01-11-2009
1.00
Preparing remaining rudder parts for priming
Details
       

 01-11-2009
3.75
Finished drilling trailing edge
Details
       

 01-10-2009
2.50
Received new rudder horn
Details
       

 01-04-2009
3.00
Prime rudder parts
       

 01-01-2009
2.00
Misc work
Details

 12-31-2008
4.50
Riveted stiffners to skin
Details
       

 12-30-2008
6.00
Prime rudder skins and stiffners
Details
     

 12-29-2008
5.25
Back on Rudder
Details
       

 12-28-2008
2.50
Right side elevator skeleton
Details
       

 12-27-2008
5.25
More work on right elevator
Details
       

 12-27-2008
3.00
Continue with RS elevator
Details

 12-26-2008
3.00
Started on right side elevator
Details
       

 12-23-2008
3.75
Continued with rudder assembly
Details
       

 12-23-2008
3.00
Assembly of Rudder
       

 12-22-2008
2.00
More edge work on rudder parts and another opps mo
Details

 12-21-2008
1.00
Smothed edges of rudder part
Details

 12-21-2008
2.00
Finishing the VS
Details
       

 12-21-2008
4.20
Back on rudder
Details
       

 12-20-2008
2.25
Riveted VS skin to skeleton
Details
       

 12-19-2008
2.00
Started to rivet VS assembly together
Details
       

 12-19-2008
1.00
Riveted ribs to front spar
Details
       

 12-19-2008
5.50
Prime VS parts
Details
       

 12-19-2008
0.30
Clecoed skin to skeleton
Details
       

 12-18-2008
1.00
Match drilled stiffners to skin, then dimpled stif
Details
       

 12-17-2008
1.00
Trimmed and smoothed edges of left side rudder sti
Details
       

 12-17-2008
2.00
Completed all stiffners - ready for drilling

 12-16-2008
2.00
Worked on Rudder stiffners
Details
       

 12-16-2008
2.00
More rudder work
Details
       

 12-15-2008
2.30
VS work
Details

 12-15-2008
2.00
Started rudder
Details
       

 12-14-2008
6.50
Completed HS .....for now
Details
       

 12-13-2008
3.00
Riveted right side of HS

 12-06-2008
5.50
Riveted LS of HS
Details
       

 12-06-2008
0.01
More pictures of HS riveting
Details
       

 12-05-2008
4.00
Prime HS parts
Details
       

 12-03-2008
3.00
Riveting HS
Details
       

 12-01-2008
2.50
Practiced riveting
Details
       

 11-30-2008
1.00
Start to rivet HS
Details
       

 11-29-2008
2.20
Preparing for priming
Details
       

 11-29-2008
2.80
Finish Alodine HS parts

 11-28-2008
4.00
Priming prep
Details
       

 11-27-2008
3.00
Practice using Alodine 1201, and AKZO

 11-26-2008
1.00
Alumiprep 33 left side HS
Details
       

 11-25-2008
2.00
Trimmed rear spar
Details

 11-11-2008
2.50
Continue smoothing edges of all HS parts

 11-10-2008
1.75
Take HS appart to prepare for priming
Details

 10-03-2008
1.00
Purchased tools for priming
       

 10-02-2008
2.00
Wiring of larger compressor
Details

 10-01-2008
1.50
Finish dimpling and re-assemble all parts
Details

 09-30-2008
1.00
VS edge finishing
Details

 09-29-2008
4.25
More VS work
Details
       

 09-28-2008
4.50
VS work
Details
       

 09-27-2008
6.50
Started VS
Details
       

 09-25-2008
2.00
Completed dimpling and clecoed skin for test
       

 09-24-2008
3.00
Deburr and dimple left HS
Details
       

 09-23-2008
1.80
Dimpled right side HS skins
Details

 09-22-2008
4.25
Dimpled HS
Details
       

 09-21-2008
4.25
Left and right HS assembled and ready for deburr a
Details
     

 09-20-2008
3.75
Assembly of right side HS
Details
       

 09-20-2008
4.50
Assembly of left side HS
Details
       

 09-19-2008
4.00
Assembled left side HS skeleton
Details
       

 09-18-2008
1.80
Edge finishing of HS ribs
Details

 09-17-2008
2.50
Smoothed, straightened, and fluted all left side
Details
     

 09-16-2008
3.00
Front spar reinforcement angles
Details
       

 09-15-2008
2.00
HS - Front spar
Details
       

 09-05-2008
1.00
Sorted AN470, 426 rivets into containers

 09-05-2008
2.00
Rear spar ass'y
Details
       

 09-04-2008
8.00
Work Bench
Details
       

 09-04-2008
0.00
Set up new buffer with scotch brite wheel

 09-03-2008
0.00
Add T8 lights over work area

 09-01-2008
1.60
Begin rear spar ass'y
       

 06-06-2008
0.00
My wife Louise taking her first RV ride
Details
       

 05-26-2007
0.00
My first ride in an RV
Details
       










Copyright © 2001-2019 Matronics. All Rights Reserved.