KitLog pro

Powered By Kitlog Pro v2.0

ROBERT'S WEB SITE
Work Logs Found: 129
Category Work Time: 367 Hours
 Date
Hours
Work Log Summary

Details

 07-20-2018
2.00
Trimmed inboard flaps and re-checked rig.
Details
       

 07-01-2018
2.00
Finished cleaning up wing gap fairings and install
Details
       

 07-01-2018
0.00
Airframe completed - pics
Details
       

 06-30-2018
6.00
All fabrication is finished now - the aircraft is
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-30-2018
0.00
Additional pics for today.
Details
       

 06-29-2018
6.00
Final flap rigging & install. ADSB472 new box ins
Details
       

 06-29-2018
0.00
Additional pics for today.
Details
       

 06-29-2018
0.00
Additional pics for today.
Details
       

 06-25-2018
4.00
Final install of ailerons, torqued all nuts, initi
Details
       

 06-20-2018
3.00
Tank brackets bolted/torqued & safety wire. Rigge
Details

 06-19-2018
2.00
Installed pitot tube and heat connections. AP ser
Details
       

 06-18-2018
3.00
Wing wiring connections finished on both wings. RT
Details
       

 06-17-2018
4.00
Wing bolts installed (close tolerance) and torqued
Details
       

 06-16-2018
8.00
Wing - aft spar drilling and gap fairing nutplate
Details
       

 06-14-2018
1.00
Made 3" incidence spacer for Smart Level for wing
Details

 12-20-2015
4.00
Wings Done!
Details
       

 12-19-2015
1.00
More wingtip sanding and fiberglass clean up.
Details

 12-09-2015
3.00
Fiberglass work on wingtips
Details

 12-08-2015
1.00
Fiberglass work on wingtips - micro
       

 12-05-2015
9.00
More ER Tank Work
Details
       

 12-04-2015
6.00
ER Tank Misc.
Details
       

 11-22-2015
3.00
Additional flox inside of trailng edges of tips.
Details

 11-21-2015
3.00
Wing Tip - Trailing Edge Fiberglass Work
Details
       

 11-20-2015
4.00
Wing Finishing Tasks
Details

 11-19-2015
2.00
Re-do of short aileron pushrods
Details
       

 11-17-2015
3.00
Wingtip hinge prep
Details

 11-16-2015
4.00
Drilled tip hinges x 4.
Details

 11-15-2015
1.00
Drilled Wingtips
Details
     

 11-14-2015
0.50
Fabricated 1/2" nylon aileron stops

 11-13-2015
1.50
Began fitting wingtips

 11-12-2015
4.00
Final flap hinge install
Details
       

 11-10-2015
3.00
Drilled R Flap hinge. Painted Aileron pushrods (l
       

 11-09-2015
3.00
Fabricated and finished long aileron pushrods
Details
       

 11-08-2015
2.00
Fabricated short aileron pushrods
Details

 11-07-2015
6.00
Riveted Ailerons R & L
Details
       

 11-06-2015
6.00
Final prep and priming
Details
       

 11-04-2015
2.15
Deburred and dimpled FWD skins and spars.

 11-03-2015
3.00
Forward aileron work
Details

 11-02-2015
2.50
Drilled aileron spars, ribs, counterbalance pipes
       

 10-30-2015
4.00
Finished aileron stiffeners, riveted. Trailing ed
Details

 10-29-2015
5.00
Cut all 32 aileron stiffeners, deburred aft skins
Details
       

 10-26-2015
10.50
Riveted R & L Flaps
Details
       

 10-25-2015
3.00
Primed Flap parts and skins
       

 10-23-2015
11.00
Prep of Flap Parts
Details

 10-22-2015
4.00
Fabricated Flap Hinges, drilled nutplates
       

 10-21-2015
5.00
Drilled Flap Skins/Ribs
Details
       

 10-19-2015
4.00
Riveted RIGHT Outboard Bottom Skin
Details
       

 10-16-2015
5.50
Riveted LEFT Outboard Bottom Skin
Details
       

 10-10-2015
10.00
Riveted R & L Inboard Bottom Skins
Details
       

 04-23-2015
2.00
Riveted Flap Braces, Clecoed INBD skins
       

 04-20-2015
3.00
Riveted Aileron Brackets and Aileron Gap Seals
       

 04-18-2015
3.00
Painted all bottom wing skins, flap braces/aileron
Details
       

 04-17-2015
3.00
Dimpled alll 4 bottom wing skins
       

 04-16-2015
2.00
Deburred all 4 bottom wing skin holes
Details

 04-14-2015
4.00
Deburred all 4 bottom skin edges.

 04-05-2015
1.50
Prepped aileron gap seals and flap braces
Details

 04-01-2015
1.50
Drilled aileron gap seals and flap braces - both w
       

 03-31-2015
1.50
Drilled aileron brackets to rear spars

 02-28-2015
7.00
Riveted RIGHT Top Wing Skins
Details
     

 02-24-2015
2.00
Deburred and riveted Landing and Taxi Lights

 02-20-2015
1.00
Installed Conduit in L Wing
Details
       

 02-15-2015
7.00
Riveted LEFT Top Wing Skins
Details
       

 02-14-2015
1.50
Primed and Riveted Aileron Brackets
     

 02-10-2015
2.00
Prepped Aileron Brackets and drilled all holes and

 11-23-2014
1.00
Installed Tank Joint Plate and ER Tank Access nutp
       

 11-22-2014
5.00
Riveted both leading edges to spars, clecoed top s
Details
       

 11-20-2014
4.50
Riveted both leading edge skins to ribs and primed
       

 11-19-2014
2.00
Countersunk R wingspars top/bottom and L wing bott

 11-18-2014
4.50
Dimpled Wing Ribs and Coutersinking of L top spar
Details

 11-17-2014
2.00
Deburred wing skeletons (spars/ribs) for both wing

 11-16-2014
4.00
Primed top skins and LE parts
Details
       

 11-15-2014
5.00
Deburred Top Skin Holes, Dimpled and Cleaned

 11-14-2014
3.50
Deburred all top skin edges and wing walks.

 11-12-2014
1.00
Devinyled all top skins.
Details

 11-08-2014
3.00
LE Deburring and Dimpling
Details

 11-06-2014
2.00
Deburred LE skins
Details

 11-02-2014
4.00
LE Deburring, skins and holes
Details

 11-01-2014
8.00
Pitot Tube Mount, Landing Lights, new L LE rib
Details
     

 10-27-2014
4.00
Match drilled bottom skins and fab'ed pitot bracke
Details
       

 10-26-2014
4.00
Match Drilled Top Skins and LE's
Details
       

 10-24-2014
2.00
Landing Light holes cut
Details
       

 10-21-2014
1.00
Landing Light marking

 10-18-2014
1.00
Prepped new 408-1L inboard LE rib and W-423 joint
Details
     

 10-12-2014
1.00
Drilled Tie Down Ring holes
       

 10-10-2014
2.00
Drilled 408-1L/R LE ribs and W-423 joint plates to

 10-09-2014
2.00
Drilled wing walks, clecoed L/R top skins, clecoed
       

 10-05-2014
2.00
Riveted R main ribs to and rear spar and clecoed L
Details
       

 10-04-2014
7.00
Main Ribs riveted to spars
Details
       

 10-03-2014
4.00
Match drilled and deburred all main ribs to spar
       

 10-02-2014
4.00
Primed all main and LE ribs
       

 10-01-2014
1.00
Cleaned all ribs with mineral spirits, fluted both

 09-28-2014
1.00
Final rib scotch-brite

 09-27-2014
1.00
Drilled rear spar to main rib lower (small) flange

 09-26-2014
1.00
Flanged and Fluted All Tank Ribs
       

 09-26-2014
0.50
All Ribs Completed
Details
       

 09-25-2014
3.00
Deburred 10 Remaining Tank Ribs

 09-24-2014
1.50
Deburred 4 Tank Ribs

 09-23-2014
3.00
Deburred 5 Wing Nose Ribs, Flanged and Fluted

 09-22-2014
2.50
Deburred 7 Wing Nose Ribs

 09-17-2014
1.50
Drilled Main Wing Ribs for Conduit/Wiring

 09-16-2014
2.50
Completed Main Wing Ribs
Details

 08-30-2014
4.00
Deburred 10 Main Wing Ribs

 08-27-2014
2.00
Deburred 4 Main Wing Ribs

 08-23-2014
1.00
Deburred 2 Ribs

 08-22-2014
1.00
Inventoried and Relabeled Wing Ribs
     

 07-25-2014
0.50
Spars Completed
       

 07-24-2014
1.50
Rear Spars - Riveted
       

 07-22-2014
1.50
Rear Spars - Primed
       

 07-20-2014
1.50
Rear Spars - Deburring Completed
     

 07-18-2014
2.50
Rear Spars - Deburring
       

 07-13-2014
2.50
Rear Spars - Match Drilled and Aileron Pushrod Hol
       

 07-12-2014
3.00
Main Spar - Tank NP Countersinking Cont'd
Details
     

 07-11-2014
1.00
Main Spar - Tank NP Countersinking
Details
       

 07-10-2014
2.00
Rear Spars - Attach Area Trimmed and Match Drille
Details
     

 07-09-2014
2.00
Main Spar - Installed Tie Downs and Aileron Bellcr
Details

 07-08-2014
1.00
Main Spar - Tie Downs Completed
Details
     

 07-07-2014
2.00
Main Spars - Drilled Tie Downs

 07-05-2014
3.50
Main Spars - Tie Downs
Details
       

 07-04-2014
3.00
Main Spars - Riveted Fuel Tank and Inspection Pane

 07-03-2014
2.00
Main Spar - Primed CSKs and tested NP countersinks
Details

 07-02-2014
3.00
Main Spar Nutplates - #40 CSK
Details
       

 06-13-2014
2.00
Wing Kit Inventory
Details
       










Copyright © 2001-2024 Matronics. All Rights Reserved.