KitLog pro

Powered By Kitlog Pro v2.0

Christopher's Web Site
Work Logs Found: 304
Category Work Time: 952 Hours
 Date
Hours
Work Log Summary

Details

 11-21-2018
0.00

Details

 04-17-2018
0.00
RV 14A Emp and Wing Kit ordered!
Details
       

 05-06-2017
5.00
Intake Manifold Issues
Details
       

 04-09-2017
0.00
Flight Training
Details
       

 03-26-2017
6.00
Center of Gravity / Weight and Balance
Details
       

 03-25-2017
6.50
Fuel Flow Test
Details
 

 03-15-2017
2.00
Replace Ground Wheels
Details
       

 03-14-2017
2.00
Starting Checklist
Details
       

 03-11-2017
2.00
Carpet installation
Details
       

 03-10-2017
15.00
Seat pans / storage
Details
       

 03-09-2017
2.00
Torque rotor head bolts & Compass Card
Details
       

 03-09-2017
3.00
Exterior Wires, Antenna Coax, Data Plate
Details
       

 03-08-2017
2.00
Wires, CHT wire, clean interior
Details
       

 03-07-2017
3.00
Governor wiring, wire tying governor, swap fuel se
Details
     

 03-06-2017
3.50
Misc. wire tying/cotter pining – tail rotor box,
Details
       

 03-05-2017
1.50
Labeling and placards
Details
       

 02-26-2017
4.00
Reinstall Drive Shaft
Details
       

 02-19-2017
1.50
Install Transmission Breather Hose
Details
       

 02-18-2017
2.50
Install Transmission fitting and Hose
Details
       

 02-18-2017
2.50
Drain and Change Trans Fluid
Details
       

 02-18-2017
1.50
Change Oil and Filter
Details
       

 02-14-2017
0.00
Studying for Rotorcraft Add-On
Details
       

 02-13-2017
0.00
Rotorcraft Add-on Status and History
Details

 02-12-2017
3.00
Labeling for FAA
Details
       

 02-11-2017
2.50
Remove TR Driveshaft
Details
       

 02-06-2017
0.75
Transmission Breather
Details

 02-06-2017
3.00
Seat panels / Headboard / Seat Installation
Details
       

 02-06-2017
0.75
Ground Movement Wheel Issues
Details
     

 02-06-2017
4.00
First Start-Up!!!!!!!!!
Details
       

 02-06-2017
4.00
Control rigging
Details
       

 02-05-2017
2.00
Wire, fuel, and Calibrate Fuel Tanks
Details
       

 02-05-2017
2.00
Pitch Change Links
Details
       

 02-05-2017
2.50
Misc. Prep Work
Details
       

 02-05-2017
2.75
Main Rotor Blade Lead & Lag Adjustment
Details
       

 02-05-2017
2.00
Main Rotor Blade Assembly
Details
       

 02-05-2017
4.00
Hoisting and Installing Main Rotor Blades
Details
       

 02-05-2017
2.00
Fuel Tanks and Tank Braces Installation
Details
       

 02-04-2017
1.50
Transmission Tachometer and Temp gauge Installatio
Details
       

 02-04-2017
3.00
Driveshaft Installation (Continued)
Details
       

 02-04-2017
3.00
Bubble Installation
Details
       

 02-04-2017
1.50
Antenna and Horizontal Stab Installation
Details
       

 02-03-2017
8.00
Flu and Infection / Transmission Installation
Details
       

 02-03-2017
4.00
Driveshaft Installation
Details
       

 02-03-2017
3.00
Control Rods
Details
       

 02-02-2017
2.00
Pick up Tom and Move Helicopter
Details
       

 02-01-2017
2.00
Move Necessary Items to Hanger
Details
       

 01-31-2017
5.00
Organize Hanger for Relocation
Details
       

 01-30-2017
1.00
FAA Registration
Details
     

 01-29-2017
1.50
Trim Motor Connection Redo
Details
       

 01-28-2017
1.50
Headboard Wiring Inspection
Details
       

 01-27-2017
2.00
Compass and Intake Filter Installation
Details
       

 01-26-2017
3.00
3M Blade Tape Installation
Details
       

 01-25-2017
2.50
Main Rotor Blade Striping
Details
       

 01-25-2017
1.00
Heim Joint Spin-up and Painting of Pitch Links
Details
       

 01-24-2017
1.50
Tail Rotor Blade Striping
Details
       

 01-23-2017
2.50
Main Rotor Blade Grip Installation
Details
       

 01-22-2017
1.00
Communication Antenna Coax Connection
Details
       

 01-21-2017
2.00
Relocate Main Blades / Main Rotor Plug Modificatio
Details
       

 01-21-2017
2.00
Main Rotor Blade End Plates
Details
       

 01-20-2017
2.00
Transponder Temp Probe / TR Control Cable
Details
       

 01-19-2017
0.50
APU Plug Repair
Details
       

 01-18-2017
2.50
Install vertical stabilizer and comm antenna
Details
       

 01-17-2017
4.00
Wire Bundling/Closed up console and floor
Details
       

 01-16-2017
2.00
E-Mag placard/Carpet templates
Details
       

 01-15-2017
3.00
Light for console switches/ TR cable clamps
Details
       

 01-11-2017
4.00
Connect Aft Nav and Strobe light/Tail Boom Ground
Details
       

 01-10-2017
4.00
Horiz. & Vert. Stabilizer Painting / Wire Mid-Boom
Details
       

 01-09-2017
3.00
Install Tail Rotor
Details
       

 01-08-2017
5.00
Reposition Cabin / Tube Seal Tail Boom / Transfer
Details
       

 01-08-2017
5.00
Install Tail Boom (Continued)/ Mount Mid-Boom Beac
Details
       

 01-07-2017
4.00
Winch Installation on Trailer
Details
     

 01-06-2017
3.00
Non-Skid Shaping and Installation / OAT Probe Inst
Details
       

 01-05-2017
5.00
Seatbelt Installation / Collective Tension Spring
Details
       

 01-04-2017
3.50
Alternator Wiring / Starter Loop Wiring
Details
       

 01-03-2017
4.50
E-Mag Wiring / Fan Indicator Light
Details
       

 01-02-2017
4.00
Fuel Tank Cross Braces / Compass Dry Fit
Details
       

 01-02-2017
2.00
Antenna Mount Fabrication
Details
       

 01-01-2017
8.00
Mag Switch Wiring / Hanger Organization / Antenna
Details
       

 12-31-2016
4.00
Oil Sender Switch Install (Continued)/ Power Up
Details
       

 12-31-2016
2.50
East Coast Visit / APU Plug
Details
       

 12-31-2016
4.50
Battery Installation / Ground Bus Connection / Bat
Details
       

 12-22-2016
1.50
Starter Wiring
Details
       

 12-22-2016
1.50
Landing Light Wiring
Details
       

 12-21-2016
3.00
More Wiring
Details
       

 12-20-2016
1.00
Horizontal Paint Scheme Design and Scheduling
Details
       

 12-19-2016
2.00
Manifold Pressure Lines and Connections
Details
       

 12-18-2016
4.00
Vertical Stabilizer
Details
       

 12-17-2016
2.50
Fuel Tank Plumbing
Details
       

 12-15-2016
2.50
E-Mag Fuses/Switches
Details
       

 12-14-2016
3.50
Fuel Tank Wiring
Details
       

 12-13-2016
2.00
Vinyl Lettering
Details
       

 12-12-2016
5.00
Horizontal Stabilizer (Continued)
Details
       

 12-10-2016
6.00
Horizontal Stabilizer
Details
       

 12-09-2016
1.00
Transmission Supports
Details
     

 12-08-2016
1.00
New “Experimental” Placard
Details
       

 12-07-2016
1.50
Tail Rotor Cable Cover
Details
       

 12-06-2016
1.50
Fuel Tank Strap Configuration and Installation
Details
       

 12-04-2016
2.50
Lead Ballast Weight
Details
       

 12-02-2016
1.50
Fuel Supply Elbow Connection and Tank Sumps
Details
       

 12-01-2016
2.00
Fuel Tank Fill Collar and Cap
Details
       

 12-01-2016
2.50
Fuel Sensor Probe Installation
Details
       

 11-30-2016
2.00
Fuel Sensor Probe Sizing
Details
       

 11-28-2016
4.00
Pitch Trim motor Installation and Trim Wiring
Details
       

 11-27-2016
2.50
Grounding Bus and Wiring
Details
     

 11-26-2016
1.00
Fuel Tank Saddles
Details
     

 11-26-2016
1.50
CHT Probe Wiring
Details
       

 11-24-2016
2.00
Tail Boom Wiring
Details
     

 11-23-2016
4.00
Console Wiring and 2nd Master Bus
Details
       

 11-22-2016
3.00
Transponder Installation
Details
       

 11-21-2016
1.00
Pod Trim
Details
       

 11-20-2016
4.50
Cyclic Wiring
Details
       

 11-20-2016
2.50
Collective Wiring
Details
       

 11-19-2016
2.00
Replace Manifold Elbow and Manifold Gauge Elbow Nu
Details
       

 11-18-2016
2.50
Fuel Shut Off Lever and Navigation Lights
Details
       

 11-17-2016
3.00
Headset Jacks
Details
       

 11-16-2016
2.50
Headboard and Accessories
Details
       

 10-16-2016
1.00
Upper Seatbelts
Details
       

 09-27-2016
3.00
Cyclic Boots and Cabin Floor Carpet
Details
       

 09-25-2016
2.50
Carburetor Mixture Arm Modifications
Details
     

 09-24-2016
2.00
Mixture Selection Cable
Details
       

 09-15-2016
1.50
Cabin Heat Cable Connection
Details
       

 08-26-2016
1.50
Cyclic Gust Lock
Details
       

 08-07-2016
1.50
Fuel Shut Off Lever Extension
Details
     

 08-06-2016
2.00
Carb Heat Cable Connection
Details
       

 08-01-2016
0.00
Air Venture 2016 Update
Details
       

 07-02-2016
8.00
Happy Anniversary!!
Details
       

 07-01-2016
2.50
Remaining Duct Work
Details
       

 06-30-2016
2.50
Throttle Linkage
Details
       

 06-26-2016
5.00
Valve Cover and Shroud Installation Preparation
Details
       

 06-25-2016
12.00
Valve Cover Polishing
Details
       

 06-19-2016
2.00
E-Mag Installation
Details
       

 06-18-2016
2.00
Spark Plug Wire Installation and Routing
Details
       

 06-12-2016
4.00
Carburetor Installation, Fuel Lines, CHT Probes
Details
       

 06-04-2016
2.50
Carb Heat Connection
Details
       

 06-01-2016
2.50
Carburetor Intake Fitting
Details
       

 05-29-2016
3.50
Manifold Connection, Spark Plugs, Exhaust Installa
Details
       

 05-28-2016
4.00
Intake Pipes, Oil Breather, Fuel Filter, Fuel/Oil
Details
       

 05-24-2016
2.00
Sump connection, Cooler Hood Fasteners, Side Shro
Details
       

 05-22-2016
3.00
Mount Carb Heat Box, Install Oil Sump, Connect Shr
Details
       

 05-21-2016
3.00
Oil Cooler and Cooler Hood
Details
       

 05-16-2016
3.00
More Engine Shroud and Oil Cooler Dry fit
Details
       

 05-15-2016
2.50
Engine Shroud Install
Details
       

 05-14-2016
1.50
Powder Coating
Details
       

 05-10-2016
2.00
Safety Wire Tying
Details
       

 05-08-2016
2.00
Engine Transfer
Details
       

 05-07-2016
2.00
Engine Hoist & Bottom Shroud Penetrations
Details
       

 05-01-2016
5.50
Engine Hoist, Firewall, Wheels
Details
       

 04-30-2016
2.00
Counter Weight, Carb Heat Box, Air Intake Screen
Details
       

 04-24-2016
9.00
Engine, Tanks, and Hanger
Details
       

 04-20-2016
2.00
Oil Cooler Hood Complete
Details
       

 04-17-2016
6.00
Oil Cooler Hood
Details
       

 04-16-2016
0.00
Received Some Outstanding Parts From Safari
Details
       

 04-10-2016
3.50
Carb Heat Box Complete
Details
       

 04-09-2016
6.00
Carb Heat Box
Details
       

 04-03-2016
2.00
Parts delays
Details
       

 04-02-2016
2.00
Polishing
Details
       

 03-27-2016
4.00
Oil Sump Cover
Details
       

 03-22-2016
1.00
Final Dry Fit Assembly of the Engine Shroud
Details
       

 03-21-2016
4.00
More Engine Shroud Nut Plating
Details
       

 03-20-2016
8.00
Back in the World of Nut Plates…Oh Joy!
Details
       

 03-19-2016
1.75
Engine Relocation to the Vertical Stand
Details
       

 03-18-2016
1.50
Engine Shroud Cracks and Miss-drilling
Details
       

 03-17-2016
2.00
Engine Shroud Assemblage
Details
       

 03-16-2016
3.00
Engine Conversion Work
Details
       

 03-13-2016
6.00
Torquing, Cotter Pinning, and Joint Painting
Details
       

 03-10-2016
8.00
Instrument Panel and Pod Completion
Details
       

 03-07-2016
23.00
Pod and cabin Wiring
Details
       

 02-29-2016
3.00
Trailer work
Details
       

 02-24-2016
3.00
Final Shipment Arrives!!!
Details
       

 02-22-2016
1.50
Quick Assembly Snapshot
Details
       

 02-21-2016
1.50
Black Steel Control Rods
Details
     

 02-20-2016
2.00
Rear Control Rods
Details
       

 02-18-2016
4.00
Control rods
Details
       

 02-17-2016
2.00
Heim Joints
Details
       

 02-16-2016
0.00
Remaining stages on the way to California!
Details
     

 02-15-2016
2.50
Tach Gauge Wiring
Details
       

 02-14-2016
2.00
Quad Gauge Wiring Harness
Details
       

 02-13-2016
1.75
Wiring Indicator Lights Complete
Details
       

 02-11-2016
3.00
Cyclic Grips and Controls
Details
       

 02-10-2016
2.75
REALLY Beginning the Wiring Process
Details
       

 02-07-2016
4.50
Collective Control Box
Details
       

 02-05-2016
1.50
Cyclic Pitch Motor Installation
Details

 02-04-2016
1.75
Continued Collective Friction Drama
Details
       

 02-03-2016
2.00
Control Rod Clearance Issue Resolution
Details
       

 02-02-2016
2.00
Control Rod Clearance Issue
Details
       

 02-02-2016
3.50
Collective Friction – Cyclic Installation
Details
       

 02-01-2016
2.00
More Pitch Motor and Panel Work
Details
       

 01-31-2016
6.00
Governor – Pitch Trim – Transponder Antenna
Details
       

 01-30-2016
9.00
Wiring & Roll Trim
Details
       

 01-29-2016
3.50
Heat Levers – Battery Box – Switches
Details
       

 01-28-2016
1.00
Exterior Power Plug
Details
       

 01-27-2016
2.50
Tail Rotor Pedals
Details
       

 01-26-2016
2.00
Remake interior left side panel
Details
       

 01-25-2016
1.50
Remade switch labels
Details
       

 01-24-2016
1.50
Pod / Floor / Console Installation
Details
       

 01-24-2016
5.00
Mixture/Nav Lights/ Ext. Power/ Transponder/Pod Vi
Details
       

 01-23-2016
6.00
Skids/Heater ducts/Pitot/Temp Gauge
Details
       

 01-22-2016
5.00
Landing Skid Installation
Details
       

 01-21-2016
2.00
Engine Hoist / Interior Panels / Pitot Installatio
Details
       

 01-21-2016
2.00
Breaker/Switches Installed and Console Assembled
Details
       

 01-20-2016
2.00
Labels Made and Warning Lights Installed
Details
       

 01-19-2016
0.00
Cabin Back from Paint
Details
       

 01-18-2016
3.00
Instrument Pod
Details
       

 01-17-2016
0.00
EAA Electrical Workshop
Details
       

 01-14-2016
0.00
Center Console Cutting and Paint
Details
       

 01-13-2016
0.00
Cabin Paint Taking Shape
Details
     

 01-11-2016
0.00
Black Exterior Coat
Details
       

 01-10-2016
0.00
Paint Masking
Details
       

 01-08-2016
0.00
First Coat of Color on the Cabin
Details
       

 01-07-2016
0.00
Hanger Leasing
Details
       

 01-06-2016
1.50
Painting and Baking the Instrument Panel
Details
       

 01-05-2016
0.00
Interior Panels Back from Paint Shop
Details
     

 01-04-2016
1.50
Panel Configuration and 15 Instrument DegreeTilt
Details
       

 01-02-2016
2.00
Add GPS mounts to Instrument Panel
Details
       

 12-27-2015
7.00
New Instrument Panel
Details
       

 12-26-2015
2.00
Panel and Console Layout
Details
       

 12-18-2015
2.00
Oversites and Repairs
Details
       

 12-18-2015
0.00
Headed to the Paint Shop!
Details
       

 12-17-2015
2.00
Cabin Riveting Continued
Details
       

 12-16-2015
7.00
Cabin Riveting
Details
       

 12-14-2015
3.00
Instrument Panel
Details
       

 12-13-2015
10.00
Final Assemby for Cabin Paint
Details
       

 12-06-2015
6.00
Panel Riveting and Assembly
Details
       

 12-05-2015
3.00
Anti-CorrosionTtreatment of the Frame
Details
       

 12-04-2015
6.00
Engine Conversion Stand
Details
       

 12-03-2015
1.00
Remainder of Panels Painted
Details
       

 12-02-2015
4.00
Instrument Panel
Details
       

 12-01-2015
1.00
Painting Booth and Finished Panels
Details
       

 11-29-2015
6.00
Sanding and Polishing of Skids Continued
Details
       

 11-28-2015
8.00
Sanding and Polishing Skids
Details
       

 11-24-2015
1.00
Boxing and Inventory of Panels
Details
     

 11-22-2015
6.00
Panel Prep for Painting
Details
       

 11-21-2015
6.00
Misc. Penetrations and Duct Prep.
Details
       

 11-20-2015
1.50
Pitot Tube Installation
Details
       

 11-13-2015
0.00
Safari Helicopters Inc. Visit - Florida
Details
       

 11-08-2015
5.00
Instrument Panel Fabrication
Details
       

 11-01-2015
2.00
Aft Kick Panel/Console Wiring Access
Details
       

 10-31-2015
4.00
Lower Cabin Door Frame Cover
Details
       

 10-30-2015
4.00
Lower Door Frame Cover Plate
Details
       

 10-29-2015
1.50
Cabin Floor/Console Wiring Access
Details
       

 10-25-2015
6.00
Canopy / Nav lights / Eyebrow Panel
Details
       

 10-24-2015
7.00
Canopy Frame and Seat Belt Access
Details
       

 10-18-2015
5.00
Pod Attachment
Details
       

 10-17-2015
4.00
Securing Console to Floor Panel
Details
       

 10-17-2015
2.00
Pod Attachment
Details
       

 10-16-2015
3.00
Rivet Floor Access Panels
Details
       

 10-15-2015
4.00
Second Cabin Floor Access Panel
Details
     

 10-14-2015
1.50
First side of Floor Access Panel Complete
Details
       

 10-11-2015
1.50
Prep and Riveting of Floor Access Panel
Details
       

 10-10-2015
6.00
Floor Access Panel Installation
Details
       

 10-09-2015
2.00
Finished Instrument Pod
Details
       

 10-08-2015
1.50
Final Instrument Pod Fairing
Details
       

 10-07-2015
2.00
Console Instrument Face Panel
Details
       

 10-05-2015
3.00
Continued Instrument Pod Fairing
Details
       

 10-01-2015
1.50
Pod Fairing Continued...
Details
       

 09-30-2015
1.50
Instrument Pod Repair and Fairing
Details
       

 09-29-2015
2.00
Instrument Pod Fairing
Details
       

 09-28-2015
3.50
Console Fabrication Continued
Details
       

 09-24-2015
6.00
Console Nut Plates
Details
       

 09-20-2015
9.50
Center Console Continued....
Details
       

 09-19-2015
8.00
Console Fabrication
Details
       

 09-18-2015
6.00
Exterior Upper Bubble Panels
Details
       

 09-17-2015
2.50
More Interior Progress
Details
       

 09-16-2015
2.00
Interior Panel Reassembly
Details
       

 09-14-2015
7.00
More Exterior Panel Work
Details
       

 09-13-2015
0.00
Terraphobic!
Details
       

 09-02-2015
5.00
Slowly Reassembling
Details
       

 08-30-2015
2.50
Exterior Reassembly
Details
       

 08-29-2015
7.50
Nut Plate State of Mind
Details
       

 08-26-2015
2.00
Naked Frame....Once Again
Details
       

 08-25-2015
0.50
Bubble Removal
Details
       

 08-24-2015
3.00
Blind (pop) Rivet Removal
Details
       

 08-23-2015
2.50
Interior Cabin Floor
Details
       

 08-22-2015
4.00
Seat Panels and Cabin Floor
Details
       

 08-21-2015
6.00
Seat panel fabrication
Details
       

 08-18-2015
4.00
Headboard Modifications
Details
       

 08-16-2015
8.00
Forward Progress!
Details
       

 08-15-2015
8.50
Any further backwards and I'd have a tailstrike.
Details
       

 08-14-2015
8.00
Fourth time is a charm
Details
       

 08-04-2015
2.50
Right Interior Panel Refit
Details
     

 08-03-2015
3.00
Pilot's collective well base panel assembly
Details
       

 08-02-2015
7.00
Pilot Collective Well Rebuild
Details
       

 08-01-2015
8.00
Copilot Collective Well Fabrication
Details
       

 07-31-2015
3.00
Copilot Collective Well
Details
       

 07-30-2015
3.00
Aft Kick Panel Fitting
Details
     

 07-29-2015
5.00
Panel Mania....
Details
       

 07-27-2015
4.00
Aft Kick Panel Layout
Details
       

 07-26-2015
2.00
Back from Oshkosh! Co-pilot well panel
Details
       

 07-16-2015
3.00
Left collective well panel fabrication
Details
       

 07-15-2015
2.00
Left collective well panel template
Details
       

 07-13-2015
4.00
Modify Floor and Kick Panels
Details
       

 07-12-2015
5.00
Left Interior Panel Fabrication
Details
       

 07-11-2015
8.00
Right Interior Panel
Details
       

 07-10-2015
3.00
Kick Panel Fabrication and Floor Reinstallation
Details
       

 07-09-2015
3.00
Kick Panel Fabrication
Details
       

 07-08-2015
3.00
Sheetmetal Fabrication of Headboard Panel
Details
       

 07-07-2015
3.00
Headboard Fabrication
Details
       

 07-05-2015
2.00
Skid Gear Installation
Details
       

 07-03-2015
3.00
She's in the shop and home at last
Details
       

 07-02-2015
6.00
Delivery Day!
Details
       

 07-01-2015
0.00
Empty Workshop Pre-helicopter
Details
       

 06-25-2015
0.00
Ready to leave Florida.
Details
     

 06-23-2015
0.00
Getting Ready for Shipping
Details
       

 05-01-2015
0.00
Pre-powder coated Frame
Details
     










Copyright © 2001-2024 Matronics. All Rights Reserved.