Powered By Kitlog Pro v2.0
RV10
RV10
Fuselage
Work Logs Found:
62
Category Work Time:
760 Hours
Date
Hours
Work Log Summary
Details
12-03-2024
12.00
Attached Cabin Top
Details
11-06-2024
16.00
Prepared Cabin top for paint and applied paint
11-05-2024
4.00
Primed fiberglass tailcone top
11-04-2024
16.00
Reinstalling controls & Fuel system after interior
10-28-2024
28.00
Prep and paint final interior of fuse and all smal
09-18-2024
24.00
Prep and paint of cabin top and tailcone top
05-26-2024
24.00
Removed for painting, controls and fuel systems
12-27-2023
68.00
Cutting and fitting and drilling out cabin top for
09-02-2023
143.00
Completed fuse including BRS channels and bulk hea
12-31-2022
8.00
Priming fuse small parts
12-05-2022
24.00
Continue working on finishing fuse interior
03-28-2022
8.00
Complete foot peddles
03-27-2022
8.00
Foot Peddles
Details
03-26-2022
18.00
Intalled SS fuel hoses for EFII system with return
03-23-2022
8.00
Fuel Pumps
Details
02-10-2022
8.00
Made support plate and mounted fuel pumps in tunne
02-07-2022
4.00
Started installing the EFII fuel system
03-22-2021
2.00
Prepared side skins for roll bending
08-27-2020
3.00
Drilling Longerons to substructure - 29-7
08-25-2020
1.00
Baggage Door seal angle
08-17-2020
6.00
Rolling Mid Side Skins
08-14-2020
2.00
Fab Clamping Block
08-13-2020
4.00
Finished bending and drilling longerons
08-07-2020
4.00
Cutting and bending longerons
08-06-2020
4.00
Cutting and Bending Longerons
07-01-2020
7.00
Continuing Riveting the Bulkhead Assemblys togethe
06-30-2020
7.00
Riveting the skins together to connect the Fwd and
06-29-2020
7.00
Connecting the Fwd Center Section Bulkhead Assembl
06-26-2020
7.00
Riveting the connecting parts to the bottom skin,
06-16-2020
7.00
Working on seat brackets, and deburring holes on S
06-15-2020
7.00
Clecoing the skin together after being primed, and
06-11-2020
7.00
Continued work on Fuselage
06-10-2020
7.00
Prepping skin and working on the seat brackets
06-06-2020
1.00
Dimpling the F-1072 FWD Bottom Skin
06-04-2020
7.00
Mating the Fwd Fuselage Bulkhead with the Aft Fuse
06-01-2020
7.00
Continued work on the Fuselage Assembly to get rea
05-28-2020
7.00
Final Drilling the holes common to the floor panel
02-22-2020
7.00
Continuing work on the Firewall
07-02-2019
7.00
Riveting the skin onto the Mid Fuse Ribs
07-01-2019
7.00
Begining work for the firewall.
04-13-2019
4.00
Primed final parts and prepared for assembly
03-20-2019
2.00
Started pre-fit ribs on rear seat subassembly
03-15-2019
4.00
Contined work on seat sub assembly
03-11-2019
4.00
Started Seat Rib Subassembly
02-09-2019
8.00
Prepared and Primed all parts and marked bottom sk
07-20-2018
18.00
Both Hunter and Logan helped finishing rear spar b
07-19-2018
12.00
Worked on rear spar bulkhead assembly
07-18-2018
12.00
Started rear spar. Primed parts
07-17-2018
12.00
Continued work on Aft center section
07-16-2018
12.00
Finished riveting primed parts on center bulkhead
Details
07-11-2018
12.00
Started Riveting on F-100C-L&R supports
Details
07-06-2018
4.00
Primed Fwd Center Section bulkhead parts
06-28-2018
12.00
Contined work on mid fus bulkheads
Details
06-27-2018
12.00
Started Mid Fuse Bulkheads
Details
08-09-2017
8.00
Primed tailcone parts
Details
08-04-2017
18.00
Tailcone work
Details
08-02-2017
18.00
Contined work on tailcone
Details
08-01-2017
18.00
Started Tailcone
Details
08-17-2016
9.00
Finished Inventory on Fuslage Kit
08-15-2016
9.00
Inventoried Fuselage Kit
08-12-2016
4.00
Picked up fuselage kit from freight lines dock
07-11-2016
2.00
Ordered Fuselage Kit
SITE NAVIGATION
RV10 Home
Category
# Logs
# Hours
All
154
1682
Avionics
3
32
BRS System
14
154
Empennage
71
658
Factory Visit
1
2
Finish Kit
2
60
Fuselage
62
760
Training
1
16
Copyright © 2001-2025 Matronics. All Rights Reserved.
