Powered By Kitlog Pro v2.0
RV10
RV10
Empennage
Work Logs Found:
71
Category Work Time:
658 Hours
Date
Hours
Work Log Summary
Details
01-31-2022
16.00
Attached tailcone to fuse and riveted bottom skins
01-25-2022
6.00
Riveted the tailcone bottom skin in place
01-17-2022
8.00
Finished riveting all tailcone assemblies
01-10-2022
16.00
Removed all blue plastic from tailcone parts, prep
01-03-2022
5.00
Match hole drilled right side tailcone longerons
12-11-2021
4.00
Assembled tail cone
Details
05-27-2020
7.00
Clecoing the Frames to get ready to final drill th
07-13-2017
18.00
Prosealing elevator trailing edge
07-06-2017
18.00
Working on elevators
06-21-2017
12.00
Working on elevators
06-19-2017
12.00
Started on elevators
06-16-2017
12.00
Completed HS
06-15-2017
12.00
Continued riveting HS skins
06-14-2017
12.00
Continued riveting HS skins
Details
06-13-2017
18.00
HS final riveting
Details
06-12-2017
18.00
Started final assembly of HS including riveting
Details
06-09-2017
8.00
Working on tail cone prep. Cutting , drilling, etc
Details
06-07-2017
16.00
Finished skinning the VS
Details
06-06-2017
18.00
Started riveting the skin
Details
06-05-2017
18.00
Final Assembly of VS. Final Riveting
Details
08-01-2016
2.00
Video taped all the pre-skinned parts for AP's rev
07-27-2016
12.00
Finished riviting the elevators for pre-skin inspe
07-25-2016
12.00
Started riviting the elevators
07-20-2016
12.00
Continued to rivit the HS
07-15-2016
4.00
Started Riviting HS Ribs
07-13-2016
12.00
Riviting the HS Spars
07-12-2016
12.00
Starting Riviting the HS. Completed upto page 8-6
07-11-2016
14.00
Started riviting the rudder.
07-08-2016
8.00
Finished Priming all parts
07-07-2016
10.00
Bulk Primed all parts and skins for rudder, HS, &
07-06-2016
12.00
FInished getting parts ready for prime.
07-05-2016
14.00
Working on the HS - Dimple Skins and Preping parts
06-30-2016
10.00
Fitted parts and installed in skins. started strip
06-29-2016
12.00
Continued drilling and fitting parts
06-28-2016
12.00
Fabricated Cradles
06-27-2016
12.00
Back on HS - preparing parts for priming
06-23-2016
12.00
Flipped parts over on racks and primed
06-22-2016
12.00
Primed Rudder and Elevators
06-21-2016
12.00
Preparing parts for priming
06-20-2016
12.00
Alumiprep and Alodine Parts
06-17-2016
12.00
Continued working on HS to prepare for priming
06-15-2016
12.00
Received replacment spar so dropped back to start
06-14-2016
12.00
Continued to work preparing parts for priming
06-13-2016
12.00
Contintued on preparing parts and stripping blue f
06-10-2016
12.00
Continued to work on getting parts ready for primi
06-09-2016
12.00
Cutting ribs and other parts
06-08-2016
12.00
While waiting on new HS spar started Elevators
06-07-2016
12.00
Drilled front spar flanges with 30 drill so had to
06-06-2016
12.00
Continued working on HS to get ready for priming
06-02-2016
12.00
Fit up and drilling on HS
05-31-2016
12.00
Pulled parts for HS and Started cutting stiffeners
05-19-2016
1.00
Finished step 13 and ready for priming
05-18-2016
4.00
Did fit up on parts and final drilling
05-17-2016
4.00
Rib parts & stiffeners seperation & Cutting
05-16-2016
1.00
Started Rudder / Pulled parts
03-15-2016
8.00
Wiring Harness for Ant and Camera
02-25-2016
1.00
Rudder stops & Wiring
Details
02-13-2016
4.00
Primed Parts
02-02-2016
4.00
Alumiprep and Alodine Parts
01-09-2016
4.00
FInished all steps up to priming on VS
01-03-2016
3.00
Dimpled Remaining Parts / RIbs
01-02-2016
0.50
FInished Dimpled Skins
01-01-2016
1.00
Dimpled VS skins
11-27-2015
1.50
Final Drilled Skins
11-20-2015
2.00
Assembled ribs and attached Skin
11-03-2015
1.50
Spar Caps
Details
10-15-2015
2.00
Vertical Stabilizer
Details
08-24-2015
4.00
Inventoried Kit
Details
08-08-2015
4.00
Picked Up Kit at Dominion Freight Dock
08-06-2015
4.00
Picked Kit up
Details
07-31-2015
0.00
Kit Shipped from Vans
SITE NAVIGATION
RV10 Home
Category
# Logs
# Hours
All
154
1682
Avionics
3
32
BRS System
14
154
Empennage
71
658
Factory Visit
1
2
Finish Kit
2
60
Fuselage
62
760
Training
1
16
Copyright © 2001-2025 Matronics. All Rights Reserved.
